DataSheet.jp

GL-8HU の電気的特性と機能

GL-8HUのメーカーはETCです、この部品の機能は「Low Price & Compact Inductive Proximity Sensor」です。


製品の詳細 ( Datasheet PDF )

部品番号 GL-8HU
部品説明 Low Price & Compact Inductive Proximity Sensor
メーカ ETC
ロゴ ETC ロゴ 




このページの下部にプレビューとGL-8HUダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

GL-8HU Datasheet, GL-8HU PDF,ピン配置, 機能
GL-8/8U SERIES
Low Price & Compact Inductive Proximity Sensor Amplifier Built-in
2-wire type Different freq.
available type available
Wide variety!
Low price!
Conforming to
EMC Directive
Low price
The GL-8/8U series satisfies the need
for a low price inductive proximity
sensor. It is recommended to large
volume users for cost reduction.
The GL-8/8U series is available in
units of ten sensors.
Easy handling DC 3-wire type
Compared with the DC 2-wire type,
there are no restrictions to connection
device input conditions when wiring.
Energy-efficient and wire-saving DC 2-wire type
Its electric current consumption is just
0.8 mA or less and the wiring workload
is reduced by about 30 %.
In case 100 Nos.
are wired
300 Nos.
30 % approx.
down
200 Nos.
DC 3-wire DC 2-wire
Wide variety
A wide variety of 16 types, front
sensing type / top sensing type,
normally open type / normally closed
type, as well as, different frequency
type which allows close mounting of
sensors, is available.
Equipped with operation indicator
The GL-8/8U series is equipped with
an operation indicator (orange) for
operation confirmation.
Waterproof
Since the sensor has IP67 protection,
it can withstand water splashes.
Front sensing type
Operation indicator
(Orange)
Top sensing type
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Free Datasheet http://www.datasheet4u.com/

1 Page





GL-8HU pdf, ピン配列
GL-8/8U
OPTION
Designation
Model No.
Sensor mounting
bracket
MS-GL8؂10
NOTE: Sensor mounting bracket (MS-GL8؂10) is available in units of ten.
Sensor mounting bracket
MS-GL8؂10
SPECIFICATIONS
1 pc. each of M3 (length 12 mm 0.472 in) truss head
screw, nut, spring washer and plain washer is
attached.
Type
DC 3-wire type
Front sensing
Top sensing
DC 2-wire type
Front sensing
Top sensing
Model No. GL-8F؂10 GL-8FB؂10 GL-8H؂10 GL-8HB؂10 GL-8FU؂10 GL-8FUB؂10 GL-8HU؂10 GL-8HUB؂10
Item Different frequency GL-8FI؂10 GL-8FIB؂10 GL-8HI؂10 GL-8HIB؂10 GL-8FUI؂10 GL-8FUIB؂10 GL-8HUI؂10 GL-8HUIB؂10
Max. operation distance (Note 1)
2.5 mm 0.098 inע20 %
Stable sensing range (Note 1)
Standard sensing object
0 to 1.8 mm 0 to 0.071 in
Iron sheet 15ן15ןt 1 mm 0.591ן0.591ןt 0.039 in
Hysteresis
Supply voltage
20 % or less of operation distance
12 to 24 V DCע10 %
Current consumption
15 mA or less
0.8 mA or less (Note 2)
Output
Utilization category
NPN open-collector transistor
Maximum sink current: 100 mA (Note 3)
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current)
0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
Non-contact DC 2-wire type
Load current: 3 to 70 mA (Note 4)
Residual voltage: 3 V or less (Note 5)
Output operation
Normally open Normally closed Normally open Normally closed Normally open Normally closed Normally open Normally closed
Short-circuit protection
Incorporated
Max. response frequency
1 kHz
Operation indicator
Orange LED (lights up when the output is ON)
Pollution degree
3 (Industrial environment)
Protection
Ambient temperature
IP67 (IEC)
מ25 toם70 ЊC מ13 toם158 ЊF, Storage: מ30 toם80 ЊC מ22 toם176 ЊF
Ambient humidity
35 to 95 % RH, Storage: 35 to 95 % RH
EMC
EN 50081-2, EN 50082-2, EN 60947-5-2
Voltage withstandability
1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance
50 M, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance
10 to 55 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each
Shock resistance
Sensing range Temperature characteristics
variation
Voltage characteristics
1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions for three times each
Over
ambient
temperature
rangeמ25
toם70
ЊC
מ13
toם158
ЊF:
within
ם15
מ10
%
of
sensing
range
at
ם20
ЊC
ם68
ЊF
Withinע2 % forע10 % fluctuation of the supply voltage
Material
Enclosure: Polyalylate
Cable
0.15 mm2 3-core cabtyre cable, 1 m 3.281 ft long
0.15 mm2 2-core cabtyre cable, 1 m 3.281 ft long
Cable extension
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
Weight
13 g approx.
12 g approx.
Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
Notes: 2) It is the leakage current when the output is in the OFF state.
Notes: 3) When the ambient temperature is ם60 toם70 °C ם140 toם158 °F, the maximum sink current varies depending on the ambient humidity. Refer to
I/O CIRCUIT AND WIRING DIAGRAMS’ on p.707 for more details.
Notes: 4) The maximum load current varies depending on the ambient temperature. Refer to ‘I/O CIRCUIT AND WIRING DIAGRAMS’ on p.707 for more details.
Notes: 5) When the cable is extended, the residual voltage becomes larger according to the resistance of the cable.


3Pages


GL-8HU 電子部品, 半導体
GL-8/8U
PRECAUTIONS FOR PROPER USE
Refer to p.1152l for general precautions.
Wiring
Make sure that the power supply is off while wiring.
Verify that the supply voltage variation is within the rating.
If power is supplied from a commercial switching regulator,
ensure that the frame ground (F.G.) terminal of the power
supply is connected to an actual ground.
In case noise generating equipment (switching regulator,
inverter motor, etc.) is used in the vicinity of this sensor,
connect the frame ground (F.G.) terminal of the equipment
to an actual ground.
Do not run the wires together with high-voltage lines or
power lines or put them in the same raceway. This can
cause malfunction due to induction.
DIMENSIONS (Unit: mm in)
GL-8F؂10
GL-8FU؂10 Sensor
Operation indicator
(Orange)
8
0.315
7.4
0.291
24
0.945
11.5
0.453
8.6
0.339
Sensing
direction
"3.1 "0.122 mounting hole
1
0.039
5.4
0.213
"2.8 "0.110 cable,
1 m 3.281 ft long
2.7 0.106
4.9 0.193
5.3 0.209
Others
Do not use during the initial transient time [200 ms (DC
2-wire type: 50 ms)] after the power supply is switched on.
Take care that the sensor does not come in direct contact
with oil, grease, or organic solvents, such as, thinner, etc.
Make sure that the sensing end is not covered with metal
dust, scrap or spatter. It will result in malfunction.
GL-8H؂10
GL-8HU؂10 Sensor
Operation indicator (Orange)
"3.1 "0.122 mounting hole
Sensing
direction
18.5
0.728
5 0.197
"2.8 "0.110 cable,
1 m 3.281 ft long
4
0.157
8
0.315
8
0.315
6
0.236
23
0.906
7.8
0.307
24.2
0.953
26
1.024
5.3
2.6 0.209
0.102
2 4.8
0.079 0.189
MS-GL8؂10 Sensor mounting bracket (Optional)
(9.0)
(0.354)
2.3
0.091
2
0.079
Mounting hole dimensions
Center of
2 sensing
0.079
"2.4 "0.094 hole,
3 or more deep
(16.2) 15.8
(0.638) 0.622
0.3
0.012
(11.5)
3.3 (0.453)
0.130
t 0.4
t 0.016
11.5
0.453
M3ן0.5 0.020 tapped hole,
8 0.315 or more deep
4.5
0.177
"3.1 "0.122 hole
Material: Stainless steel (SUS304)
1 pc. each of M3 (length 12 mm 0.472 in) truss head screw, nut, spring
washer and plain washer is attached.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected] 709

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ GL-8HU データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
GL-8H

Low Price & Compact Inductive Proximity Sensor

ETC
ETC
GL-8HB

Low Price & Compact Inductive Proximity Sensor

ETC
ETC
GL-8HI

Low Price & Compact Inductive Proximity Sensor

ETC
ETC
GL-8HIB

Low Price & Compact Inductive Proximity Sensor

ETC
ETC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap