DataSheet.jp

VO617A の電気的特性と機能

VO617AのメーカーはVishayです、この部品の機能は「Optocoupler」です。


製品の詳細 ( Datasheet PDF )

部品番号 VO617A
部品説明 Optocoupler
メーカ Vishay
ロゴ Vishay ロゴ 




このページの下部にプレビューとVO617Aダウンロード(pdfファイル)リンクがあります。

Total 9 pages

No Preview Available !

VO617A Datasheet, VO617A PDF,ピン配置, 機能
www.vishay.com
VO617A
Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS
A1
C2
4C
3E
FEATURES
• Operating temperature from - 55 °C to + 110 °C
• Good CTR linearity depending on forward current
• Isolation test voltage, 5300 VRMS
• High collector emitter voltage, VCEO = 80 V
• Low saturation voltage
• Fast switching times
• Low CTR degradation
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
The 110 °C rated VO617A feature a high current transfer
ratio, low coupling capacitance and high isolation voltage.
These couplers have a GaAs infrared diode emitter, which is
optically coupled to a silicon planar phototransistor
detector, and is incorporated in a plastic DIP-4 package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm spacing.
Creepage and clearance distances of > 8.0 mm are
achieved with option 6. This version complies with
IEC 60950 (DIN VDE 0805) for reinforced insulation up to an
operation voltage of 400 VRMS or DC. Specifications subject
to change.
APPLICATIONS
• AC adapters
• SMPS
• PLC
• Factory automation
• Game consoles
AGENCY APPROVALS
Safety application model number covering all products in
this data sheet is VO617A. This model number should be
used when consulting safety agency documents.
• UL1577, file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• BSI IEC 60950; IEC 60065
• FIMKO EN 60065, EN 60950-1
• CQC GB8898-2001
ORDERING INFORMATION
VO6 1 7A - #X0 # # T
DIP-4
Option 6
PART NUMBER
CTR
BIN
PACKAGE OPTION
TAPE
AND
REEL
7.62 mm
Option 7
10.16 mm
AGENCY
CERTIFIED/PACKAGE
CTR (%)
5 mA
> 8 mm
UL, cUL, BSI, FIMKO
50 to 600 40 to 80
63 to 125
100 to 200
160 to 320
80 to 160
130 to 260
DIP-4
VO617A VO617A-1
VO617A-2
VO617A-3
VO617A-4
-
-
DIP-4, 400 mil, option 6
-
-
- VO617A-3X006 VO617A-4X006 -
-
SMD-4, option 7
- - VO617A-2X007T VO617A-3X007T VO617A-4X007T -
-
VDE, UL, cUL, BSI, FIMKO 50 to 600 40 to 80
63 to 125
100 to 200
160 to 320
80 to 160
130 to 260
DIP-4, 400 mil, option 6
-
-
- VO617A-3X016 VO617A-4X016 -
-
SMD-4, option 7
- VO617A-1X017T VO617A-2X017T VO617A-3X017T VO617A-4X017T VO617A-7X017T VO617A-8X017T
Note
• Additional options may be possible, please contact sales office.
Rev. 1.8, 18-Apr-13
1 Document Number: 83430
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Free Datasheet http://www.datasheet4u.com/

1 Page





VO617A pdf, ピン配列
www.vishay.com
VO617A
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART SYMBOL MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
Reverse current
Junction capacitance
OUTPUT
IF = 60 mA
VR = 6 V
VR = 0 V, f = 1 MHz
VF 1 1.35 1.65 V
IR
0.01 10
μA
Cj 13 pF
VO617A-1
2 50
VO617A-2
2 50
Collector emitter leakage current
VCE = 10 V
VO617A-3
VO617A-4
ICEO
5 100
nA
5 100
VO617A-7
5 100
VO617A-8
5 100
Collector emitter capacitance
Collector emitter breakdown voltage
Emitter collector breakdown voltage
COUPLER
VCE = 5 V, f = 1 MHz
IC = 1 mA
IE = 100 μA
CCE
BVCEO
BVECO
80
7
5.2
pF
V
V
Collector emitter saturation voltage
Coupling capacitance
IF = 5 mA, IC = 1.0 mA
f = 1 MHz
VCEsat
CC
0.25 0.4
0.4
V
pF
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
VO617A
CTR
50
VO617A-1
CTR
40
VO617A-2
CTR
63
IC/IF
IF = 5 mA, VCE = 5 V
VO617A-3
CTR
100
VO617A-4
CTR
160
VO617A-7
CTR
80
VO617A-8
CTR
130
TYP.
MAX.
600
80
125
200
320
160
260
UNIT
%
%
%
%
%
%
%
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
CTR BIN SYMBOL MIN.
NON-SATURATED
Rise and fall time
Turn-on time
Turn-off time
Cut-off frequency
SATURATED
IF = 5 mA, VCC = 5 V, RL = 75
IF = 5 mA, VCC = 5 V, RL = 75
IF = 5 mA, VCC = 5 V, RL = 75
tr, tf
ton
toff
fctr
Turn-on time
Turn-off time
Rise time
Fall time
IF = 5 mA
IF = 5 mA
IF = 5 mA
IF = 5 mA
ton
toff
tr
tf
TYP.
2
3
2.3
100
6
25
4.6
15
MAX.
UNIT
μs
μs
μs
kHz
μs
μs
μs
μs
Rev. 1.8, 18-Apr-13
3 Document Number: 83430
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


3Pages


VO617A 電子部品, 半導体
www.vishay.com
0.40
0.35
IF = 10 mA
0.30
0.25
Ic = 5 mA
0.20
0.15
Ic = 2 mA
0.10
0.05
Ic = 1 mA
0.00
- 60 - 40 - 20 0 20 40 60 80 100 120
Tamb - Ambient Temperature (°C)
Fig. 11 - Collector Emitter Voltage vs. Ambient Temperature
1.4
Tamb = 0 °C
1.2 Tamb = - 55 °C
1.0 Tamb = 25 °C
0.8
0.6
0.4
0.2
0
0.1
Tamb = 75 °C
Tamb = 100 °C
Normalized to:
IF = 5 A, VCE = 5 V,
Tamb = 25 °C
1 10
IF - Forward Current (mA)
100
Fig. 12 - Normalized CTR (non-sat.) vs. Forward Current
1.2
VCE = 0.4 V
1.0 Normalized to:
IF = 5 mA,
VCE = 5 V,
0.8 Tamb = 25 °C
0.6
Tamb = 0 °C
Tamb = - 55 °C
0.4
0.2
0
0.1
Tamb = 25 °C
Tamb = 75 °C
Tamb = 100 °C
1 10
IF - Forward Current (mA)
100
Fig. 13 - Normalized CTR (sat.) vs. Forward Current
VO617A
Vishay Semiconductors
0
- 20
- 40
- 60
- 80
- 100
- 120
- 140
- 160
1
RL = 1000 Ω
VCE = 5 V
RL = 100 Ω
10 100
f - Frequency (kHz)
1000
Fig. 14 - FCTR vs. Phase Angle
1000
100
VCC = 5 V
10
1
0.1
1 10
IC (mA)
100
Fig. 15 - FCTR vs. Collector Current
1000
VCE = 5 V, IF = 2 mA
100
10
toff s)
1 ton s)
0.1
0
5 10 15
RL - Load Resistance (kΩ)
20
Fig. 16 - Switching Time vs. Load Resistance
Rev. 1.8, 18-Apr-13
6 Document Number: 83430
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

6 Page



ページ 合計 : 9 ページ
 
PDF
ダウンロード
[ VO617A データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
VO617A

Optocoupler

Vishay
Vishay
VO617C

Low Input Current Optocoupler

Vishay
Vishay


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap