|
|
PDF SBR10 Data sheet ( Hoja de datos )
| Número de pieza | SBR10 | |
| Descripción | SENSOR | |
| Fabricantes | Sensor Switch | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SBR10 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
®
SBR 10
EXTENDED RANGE 360º SENSOR
EMBEDDED SMALL BOX • LINE VOLTAGE • PASSIVE INFRARED (PIR)
SPECIFICATIONS
FEATURES
100% Digital PIR Detection,
Excellent RF Immunity
Self-Contained Relay,
No Power Pack Needed
No Minimum Load Requirements
Compatible w/ Electronic & Magnetic
Ballasts, CFLs, LED, & Incandescents
Interchangeable Hot & Load Wires,
Impossible to Wire in Reverse
Push-Button Programmable
Non-Volatile Settings Memory
Adjustable Time Delays
No Field Calibration or Sensitivity
Adjustments Required
Convenient Test Mode
100 hr Lamp Burn-in Timer
Green LED Indicator
LAMPMAXIMIZER® TECHNOLOGY
• Protects Lamp Life while
Maximizing Energy Savings
• Minimum On Timer (15 min default)
• Occ. Time Delay (10 min default)
• LampMaximizer+ Mode -
Optimizes Lamp Life & Energy
Savings (disabled by default)
• Switch Counter (in 1000’s)
• Total Lamp On Time (in khrs)
PHYSICAL SPECS
SIZE (w/ MOUNTING FLANGE)
3.40” H x 3.40” W x 1.40” D
(8.64 cm x 8.64 cm x 3.56 cm)
WEIGHT 6 oz
MOUNTING 2.65” (6.73 cm) square
opening in fixture (minimum depth
1.50” (3.8 cm))
COLOR White
ELECTRICAL SPECS
MAXIMUM LOAD
800 W @ 120 VAC
1200 W @ 277 VAC
1500 W @ 347 VAC
MINIMUM LOAD None
MOTOR LOAD 1/4 HP
FREQUENCY 50/60 Hz
DIMMING LOAD Sinks < 20mA;
~40 Ballasts @ .5mA each
OVERVIEW
The SBR 10 Series incorporates Passive
Infrared (PIR) technology into a line powered
occupancy sensor to provide maximum viewing
from the ceiling. The SBR 10 sensor recess
mounts into a 2.65” (6.73 cm) square opening
in a fixture. Its circular coverage pattern is
designed for walking motions; making it ideal
for T-shaped intersections in corridors, or
other areas where wall mounting a sensor is
not practical. Low ceiling heights are also best
covered with the SBR 10. For example, when
mounted at only 7 ft (2.13 m), the height of pick
aisles in many distribution centers, the SBR 10
provides a 32 ft (9.75 m) diameter pattern of
coverage.
SENSOR OPERATION
The sensor detects changes in the infrared
energy given off by occupants as they move
within the field-of-view. When occupancy is
detected, a self-contained relay switches the
connected lighting load on. The sensor is line
powered, switches line voltage, and requires no
field calibration or sensitivity adjustments.
LAMPMAXIMIZER®
This sensor also contains patent pending
LampMaximizer technology that allows users
to aggressively target energy savings while
still protecting lamp life. A minimum on timer,
factory set at 15 minutes,www.DataSheet.co.kr helps preserve lamp
life by eliminating all lamp cycles shorter than
lamp manufacturers’ recommendations.
A standard occupancy time delay is also present
that ensures lights turn off (assuming minimum
on timer has elapsed) if no occupancy is
detected. This timer is factory set at 10 minutes
to promote energy savings, but is adjustable
between 30 seconds and 20 minutes. These
adjustments can be done manually, through
the unit’s push-button, or automatically every
two weeks through an advanced mode, called
LampMaximizer+, that determines the optimum
time delay in order to maximize both lamp life
and energy savings. Additionally, this sensor
maintains statistics on total lamp on time and
number of cycles.
ENVIRONMENTAL SPECS
OPERATING TEMP
14º to 160º F (-10º to 71º C)
RELATIVE HUMIDITY
20 to 90% non-condensing
SILICONE FREE
ROHS COMPLIANT
OPTIONS
OCCUPANCY CONTROLLED
DIMMING (D)
• Provides dimming output to control
0-10 VDC dimmable ballasts
• Provides a second occupancy time-out
period that enables the lights to go to a
dim setting before turning off
• Adjustable max/min dim setting
PHOTOCELL (P)
• Auto set-point calibration
• Two selectable modes of operation
• On/Off mode: Photocell has full control
during periods of occupancy
• Inhibit mode: Photocell can prevent
lights from turning on if adequate
daylight is available, but cannot turn
lights off
PHOTOCELL W/ DIMMING (ADC)
• Photocell within sensor maintains total
room light level by controlling levels of
0-10 VDC dimmable ballasts
• Photocell also has full on/off control
during periods of occupancy
• Provides a second occupancy time-out
period that enables the lights to go to a
dim setting before turning off
Note: LampMaximizer+ features not
available with ADC option
347 VAC (347)
• Allows sensor to be powered from
and switch 347 VAC
LOW TEMP/HIGH HUMIDITY (LT)
• Sensor electronics are coated for
corrosion resistance
• Operates down to -40º F/C
• Required for cooler/freezer applications
WATER PROOF OPTIONS
(IP65 / IP65 KIT)
• Sensor is gasketed for inclusion into a
wet location fixture (IP65)
• Sensor is gasketed for inclusion into a
provided 4”x4” wet location junction
box (IP65 KIT)
• Sensor electronics are coated for
corrosion resistance
• Operates down to -40º F/C
CSA LISTED
TITLE 24
ASSEMBLED in U.S.A.
5 YEAR WARRANTY
ORDERING INFO SBR 10 [DIMMING/PHOTOCELL] [VOLTAGE] [TEMP/HUMIDITY/WATER PROOF]
DIMMING / PHOTOCELL CHOOSE ONE ONLY
VOLTAGE
TEMP/HUMIDITY/WATER PROOOF
CHOOSE ONE ONLY
Blank = None
Blank = 120/277 VAC
Blank = Standard
D = Occupancy Controlled Dimming
347 = 347 VAC
LT = Low Temp
P = Photocell
IP65 = Water Proof ( SENSOR ONLY)
ADC = Photocell w/ Dimming
IP65 KIT = Water Proof ( SENSOR & J-BOX)
Datasheet pdf - http://www.DataSheet4U.net/
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet SBR10.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SBR1 | Diode ( Rectifier ) |  American Microsemiconductor |
| SBR10 | SENSOR | Sensor Switch |
| SBR10 | (SBR05 - SBR30) Standard Recovery 1-Phase Silicon Bridge Rectifier Assembly |  Semtech Corporation |
| SBR10 | Diode ( Rectifier ) | American Microsemiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |