|
|
LC749403BGのメーカーはSanyo Semicon Deviceです、この部品の機能は「LCD Picture Quality Improvement IC」です。 |
部品番号 | LC749403BG |
| |
部品説明 | LCD Picture Quality Improvement IC | ||
メーカ | Sanyo Semicon Device | ||
ロゴ | |||
このページの下部にプレビューとLC749403BGダウンロード(pdfファイル)リンクがあります。 Total 13 pages
www.DataSheet.co.kr
Ordering number : ENA1948
CMOS IC
LC749403BG Silicon gate
LCD Picture Quality
Improvement IC
Overview
LC749403BG is a IC which enables higher picture quality in LCD products by improving the signals outputed to the
LCD panel. In addition to the function to improve the picture quality of the color equation and the brightness
correction, smooth picture quality is realized by converting One Seg video from 15fps to 30fps using flame
interpolation technique.
It supports up to WVGA resolution. *
Features
(1) Digital Input/Output
• Supports digital video input: YCbCr/YPbPr 24bit,16bit (4: 2: 2) signals or ITU-R BT.656 (8bit) input
• Digital RGB 24 bit signal input
• Digital RGB 18bit/24bit signal output
• Digital YCbCr 16bit/24bit signal output
(2) Picture Quality Improvement Function
• Y signal picture quality improvement: brigntness adjustment, contour correction,CDEX (Color Depth Expander),
• C signal picture quality improvement: color exciter,skin color correction,color and hue adjustment
• RGB signal picture quality improvement: brightness, contrast, white balance, black balance, gamma correction
(3) Panel Interface
• Embedded timing controller for panel driver
• Automtic timing signal generation for panel protection
• PWM for backlight control (video adaptation low power consumtion processing)
(4) Frame interpolation (×2) for One-Seg broadcast
• Double-speed (×2) mode (15fps ⇒ 30fps)
Intermediate image is predicted from the previous and next image.
*: Video input of the LC749403BG meets the following conditions:
(1) horizontal resolution is under 880 dots, and (2) vertical resolution is under 480 lines.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
41311HKPC 20110318-S00006 No.A1948-1/13
Datasheet pdf - http://www.DataSheet4U.net/
1 Page www.DataSheet.co.kr
LC749403BG
CDEX (Color Depth Expander) Example
This specification may be changed without any notices for product improvement.
Original
CDEX
Specifications
Absolute Maximum Ratings at Ta = 25°C, DVSS = 0V, AVSS_PLL = 0V, AVSS_OSC = 0V, SDVSS = 0V,
SDVSSQ = 0V
Parameter
Maximum supply voltage (I/O)
Maximum supply voltage
(SDRAM, SDRAMIF I/O, PLL)
Maximum supply voltage (core, osc)
Digital input voltage
Digital output voltage
Operating temperature
Storage temperature
Symbol
DVDD_IO
DVDD_SDIO,
AVDD_PLL,
SDVDD, SDVDDQ
DVDD_CORE
AVDD_OSC
VI
VO
Topr
Tstg
Conditions
Ratings
-0.3 to +3.96
unit
V
-0.3 to +2.6
V
-0.3 to +1.8
-0.3 to DVDD_IO+0.3
-0.3 to DVDD_IO+0.3
-40 to +85
-55 to +125
V
V
V
°C
°C
Allowable Operation Ranges at Ta = -40 to +85°C, DVSS = 0V, AVSS_PLL = 0V, AVSS_OSC = 0V, SDVSS = 0V,
SDVSSQ = 0V
Parameter
Supply voltage (I/O)
Symbol
DVDD_IO
Conditions
min
2.6
1.7
Ratings
typ
2.85
1.8
max
3.6
1.95
unit
V
V
Supply voltage (SDRAMIF I/O)
Supply voltage (SDRAM, PLL)
Supply voltage (core, osc)
Input voltage range
DVDD_SDIO
SDVDD, SDVDDQ
AVDD_PLL
DVDD_CORE
AVDD_OSC
VIN
1.7
1.8
1.95
V
1.7
1.8
1.95
V
1.14
0
1.2 1.26
DVDD_IO
V
V
No.A1948-3/13
Datasheet pdf - http://www.DataSheet4U.net/
3Pages www.DataSheet.co.kr
Block Diagram
LC749403BG
DYGIN[7:0]
DCBIN[7:0]
DCRIN[7:0]
SDRAM
SDRAM
Controler
DHSI
DVSI
DDEI
DCKI
OSDBL
XRST
TEST
Ocillator
LC749403BG
delay
I²C/SIO
DYGOUT[7:0]
DCBOUT[7:0]
DCROUT[7:0]
DVSO
DHSO
DDEO
DCKO
GRST
FLM
OE
CPV
STRB
SP
DEXR
POL
PWM
MPU
No.A1948-6/13
Datasheet pdf - http://www.DataSheet4U.net/
6 Page | |||
ページ | 合計 : 13 ページ | ||
|
PDF ダウンロード | [ LC749403BG データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
LC749403BG | LCD Picture Quality Improvement IC | Sanyo Semicon Device |