DataSheet.jp

VX-01-1A2 の電気的特性と機能

VX-01-1A2のメーカーはOmron Electronicsです、この部品の機能は「Snap Action Switch」です。


製品の詳細 ( Datasheet PDF )

部品番号 VX-01-1A2
部品説明 Snap Action Switch
メーカ Omron Electronics
ロゴ Omron Electronics ロゴ 




このページの下部にプレビューとVX-01-1A2ダウンロード(pdfファイル)リンクがあります。

Total 8 pages

No Preview Available !

VX-01-1A2 Datasheet, VX-01-1A2 PDF,ピン配置, 機能
Snap Action Switch
VX
Miniature Snap Action Switch
• Compact snap action switch with low force operation
• Wide variation extends from microload to 5 A switching
current, with shapes identical to those of the V-series
Miniature Basic Snap Action Switch.
• Internal hinge lever mechanism assures outstanding con-
tact reliability
• RoHS Compliant
Ordering Information
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
Terminal Style
A
C2
A
C2
A
C2
A
C2
A
C2
A
C2
A
C2
OF max.
25 gf
50 gf
25 gf
50 gf
50 gf
30 gf
20 gf
30 gf
60 gf
30 gf
5A
VX-5-1A2
VX-5-1A3
VX-5-1C22
VX-5-1C23
VX-51-1A3
VX-51-1C23
VX-52-1A3
VX-52-1C23
VX-53-1A3
VX-53-1C23
VX-54-1A3
VX-54-1C23
VX-55-1A3
VX-55-1C23
VX-56-1A3
VX-56-1C23
Rated current
0.1 A
VX-01-1A2
VX-01-1A3
VX-01-1C22
VX-01-1C23
VX-011-1A3
VX-011-1C23
VX-012-1A3
VX-012-1C23
VX-013-1A3
VX-013-1C23
VX-014-1A3
VX-014-1C23
VX-015-1A3
VX-015-1C23
VX-016-1A3
VX-016-1C23
Model Number Legend
VX - -
1 2 345
1. Ratings
2.
www.DataSheet4U5.:com 5 A at 250 VAC
01: 0.1 A at 30 VDC
Actuator
3.
None: Pin plunger
1: Short hinge lever
2: Hinge lever
3: Long hinge lever
4.
4: Simulated roller lever
5: Short hinge roller lever
6: Hinge roller lever
Contact Form
5. Maximum Operating Force
1: SPDT
2: 25 gf
2: SPST-NC
3: 50 gf
3: SPST-NO
Terminals
Note: These OF values are for
the pin plunger models.
A: Solder terminals
C2: Quick-connect terminals (#187)
Snap Action Switch VX 135

1 Page





VX-01-1A2 pdf, ピン配列
Engineering Data
Mechanical service life
VX-5
Ambient temperature: 20±2°C
Ambient humidity: 65±5%
200
Without load
Operating frequency: 600 operations/min
100
50
Full stroke
Rated value
of OT
10
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (1.6) 1.8
Overtravel (mm)
Electrical service life
VX-5
5
2
1
0.5
0.3 Ambient temperature: 20±2°C
Ambient humidity: 65±5%
Without load
0.1 Operating frequency: 60 operations/min
cosφ = 1, 250 VAC
0 0.5 1 2 3 4 5 6 7 8 9 10 11 12
Switching current (A)
Mounting
Panel Mounting
All switches may be panel mounted using M3 mounting screws with
plane washers or spring washers to securely mount the switch.
Tighten the screws to a torque of 0.39 to 0.59 N·m.
Two, 3.1-dia. mounting holes
or M3 screw holes
10.3 ± 0.1
www.DataSheet4U.com
22.2 ± 0.1
VX-01
200
100
50
Ambient temperature: 20±2°C
Ambient humidity: 65±5%
Without load
Operating frequency: 600 operations/min
10
Full stroke
Rated value
of OT
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (1.6) 1.8
Overtravel (mm)
VX-01
10
5
2
1
0.5
0.3
Ambient temperature: 20±2°C
Ambient humidity: 65±5%
Without load
Operating frequency: 60 operations/min
cosφ = 1, 250 VAC
125 VAC, 30 VDC
0.1
0
0.01 0.02 0.05 0.08 0.1
Switching current (A)
Contact Form
SPDT
SPST-NC
SPST-NO
COM
NC
NO
NC
COM
COM
NO
Snap Action Switch VX 137


3Pages


VX-01-1A2 電子部品, 半導体
Precautions
Correct Use
Mounting Direction
For a switch with an actuator, mount the switch in a direction where
the actuator weight will not be applied to the switch.
Since the switch is designed for a small load, its resetting force is
small. Therefore, resetting failure may occur if unnecessary load is
applied to the switch.
Operation
Keep the operation control completely separate from the actuator of
the switch, and push it down fully when starting operation. Do not dis-
place the operating position of the actuator when machining.
Consult OMRON in advance if the operating speed is to be extremely
slow, or if the pushbutton is to be set somewhere between the free
position and operating position.
Mount pin pushbutton switches so that stroke of the pushbutton and
the stroke of the operating control overlap on a vertical line. The
stroke of the switch, after operation, should be set to 60- 90% that of
standard OT (MIN operation).
Using Microloads
Using a model for ordinary loads to switch microloads may result in
faulty operation. Instead, use the models that are designed for micro-
loads and that operate in the following range;
0.16mA
30
26mA 100mA
24
Operating
Operating range
for micro load
models VX-01
range for
general-
load models
VX-5
12
Inoperable
range
5
1mA
100mA 160mA
0
0.1
1
10 100 1,000
Current (mA)
However, even when using microload models within the operating
range shown above, if inrush current or inductive voltage spikes
occur when the contact is opened or closed, it may increase contact
wear and so decrease the service life. Therefore, insert a contact
protection circuit where necessary.
Cautions
Handling
Be careful not to drop the switch. Doing so may cause damage to the
switch’s internal components because it is designed for a small load.
Solder Terminal Connection
Quickly finish the soldering of the lead wire to its terminal. Use a sol-
dering iron rated at 60W and preferably complete the soldering within
5 seconds.
Excess wattage or prolonged heating can deteriorate the characteris-
tics of the switch.
Insulation Distance
When mounting, make sure there is sufficient insulation distance
between the switch and its mounting panel. If it is insufficient, install
an insulation guard or separator. Always install an insulation guard or
separator when mounting the microswitch on a metallic body. Con-
tact your OMRON representative for information about insulation
guards and separators.
Application Environment
Do not use the Switch in locations that are subject to toxic gas, sili-
con, excessive dust, excessive dirt, high temperatures, high humidity,
sudden temperature changes, water splashes, or oil splashes.
Otherwise, damage resulting by faulty contact of the Switch contacts,
corrosion, or other causes, or other functional faults may occur.
Depending on environmental conditions, the switch should be
rechecked about 3 to 6 months after it has been assembled.
www.DataSheet4U.com
140 Snap Action Switch VX

6 Page



ページ 合計 : 8 ページ
 
PDF
ダウンロード
[ VX-01-1A2 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
VX-01-1A2

Snap Action Switch

Omron Electronics
Omron Electronics
VX-01-1A3

Snap Action Switch

Omron Electronics
Omron Electronics


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap