DataSheet.jp

SMB10 データシート PDF ( 特性, スペック, ピン接続図 )

部品番号 SMB10
部品説明 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
メーカ MIC GROUP RECTIFIERS
ロゴ MIC GROUP RECTIFIERS ロゴ 

Total 4 pages
		

No Preview Available !

SMB10 Datasheet, SMB10 PDF,ピン配置, 機能
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SMB5.0 THRU SMB170CA
Stand-off Voltage
Peak Pulse Power
5.0 to 170 Volts
600 Watts
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
For surface mounted applications in order to optimize
board space
Low profile package
Built-in strain relief
Glass passivated junction
Low incremental surge resistance
600W peak pulse power capability with a 10/1000μs
Waveform, repetition rate (duty cycle): 0.01%
Excellent clamping capability
Fast response time: typically less than 1.0ps from 0 Volts to
V (BR) for unidirectional and 5.0ns for bidirectional types
For devices with V (BR) 10V, ID are typically ID less than 1.0μA
High temperature soldering guaranteed:
250/10 seconds at terminals
MECHANICAL DATA
DO-214AA(SMB)
Dimensions in inches and (millimeters)
Cass: JEDEC DO-214AA,molded plastic body over passivated junction
Terminals: Axial leads, solderable per MIL-STD-750, Method 2026
Polarity: Color bands denotes positive end (cathode) except bidirectional
Mounting position: any
Weight: 0.003 ounces, 0.093 gram
DEVICES FOR BIDRECTIONAL APPLICATIONS
For bidirectional use C or CA suffix for types SMB-5.0 thru SMB-170 (e.g. SMBG5.0C,SMBJ170CA)
.Electrical Characteristics apply in both directions.
www.DaMtaSAheXet4IUM.cUomM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25ambient temperature unless otherwise specified
Ratings
Symbols
Value
Unit
Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1,2,FIG.1)
Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3)
Peak forward surge current, 8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) (Note2,3) unidirectional only
Maximum instantaneous forward voltage at 50A (NOTE 3,4)
unidirectional only (NOTE 3)
Operating Junction and Storage Temperature Range
PPPM Minimum 600 Watts
IPPM See Table 1 Amps
IFSM
100.0
Amps
VF SEE NOTE 4 Volts
TJ, TSTG
50 to +150
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25per Fig.2
2. Mounted on 0.2×0.2(5.0×5.0mm) copper pads to each terminal
3. Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minutes maximum.
4. VF=3.5 V on SMB thru SMB-90 devices and VF=5.0V on SMB-100 thru SMB-170 devices
E-mail: sales@cnmic.com Web Site: www.cnmic.com

1 Page





ページ 合計 : 4 ページ
PDF
ダウンロード
[ SMB10.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
SMB10

There is a function of SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS.

Lite-On Technology
Lite-On Technology
SMB10

There is a function of SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR.

MIC GROUP RECTIFIERS
MIC GROUP RECTIFIERS
SMB100

There is a function of SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS.

Lite-On Technology
Lite-On Technology
SMB100

There is a function of SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR.

MIC GROUP RECTIFIERS
MIC GROUP RECTIFIERS

多くを見つけるデータシート

部品番号部品説明メーカ
82S129

The 82S126 and 82S129 are field programmable, which means that custom patterns are immediately available by following the Signetics Generic fusing procedure. 1K-bit TTL Bipolar PROM, Address access time : 50ns max.

NXP
NXP
D1695

This part is a darlington connection NPN silicon epitaxial transistor. The 2SD1695 is a Darlington connection transistor and incorporates a dumper diode between the collector and emitter and a constant voltage diode and protection elements between the collector and base. This transistor is ideal for drives in solenoid and actuators.

NEC
NEC

www.DataSheet.jp    |   2018   |  メール    |   最新    |   Sitemap