|
|
PDF STK4034X Data sheet ( Hoja de datos )
| Número de pieza | STK4034X | |
| Descripción | AF Power Amplifier | |
| Fabricantes | Sanyo Semicon Device | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de STK4034X (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
Ordering number : EN4673A
www.datasheet4u.com
Thick Film Hybrid IC
STK4034X
AF Power Amplifier (Split Power Supply)
(45 W min, THD = 0.008%)
Features
• Miniature package allows audio sets to be made
slimmer.
• Pin-compatible amplifiers with outputs of 30 to
100 W are available.
• Facilitates thermal design of slim stereo sets by
distributing the heat dissipating ICs in the set.
• Current mirror circuit application reduces distortion to
0.008%.
• Supports the design of supplementary electronic circuits
(thermal shutdown, load short protection, and pop noise
muting at power on and off).
Package Dimensions
unit: mm
4062
[STK4034X]
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage
Thermal resistance
VCC max
θj-c
±50 V
1.8 °C/W
Junction temperature
Tj
150 °C
Operating substrate temperature
Tc
125 °C
Storage temperature
Tstg
–30 to +125
°C
Available time for load shorted
tS* VCC = ±35 V, RL = 8 Ω, f = 50 Hz, PO = 45 W
2s
Note: Use a constant-voltage power supply as the test power supply unless otherwise specified.
* Use the transformer power supply shown on the next page when measuring the available time for load shorted and the output noise voltage.
Recommended Operating Conditions at Ta = 25°C
Parameter
Recommended supply voltage
Load resistance
Symbol
VCC
RL
Conditions
Ratings
±35
8
Unit
V
Ω
Operating Characteristics
at Ta = 25°C, VCC = ±35 V, RL = 8 Ω, VG = 40 dB, Rg = 600 Ω, 100 k LPF ON, RL (noninductive load)
Parameter
Symbol
Conditions
Ratings
Unit
min typ max
Quiescent current
Output power
Total harmonic distortion
Frequency response
ICCO
VCC = ±41 V
15 120 mA
PO (1)
PO (2)
THD = 0.008%, f = 20 Hz to 20 kHz
VCC = ±31 V, THD = 0.04%, RL = 4 Ω, f = 1 kHz
45
50
W
THD
PO = 1.0 W, f = 1 kHz
0.008
%
fL, fH
PO = 1.0 W,
+0
–3
dB
20 to 50 k
Hz
Input resistance
Output noise voltage
Neutral voltage
ri
VNO*
VN
PO = 1.0 W, f = 1 kHz
VCC = ±41 V, Rg = 10 kΩ
VCC = ±41 V
55 kΩ
1.2 mVrms
–70 0 +70 mV
Note: Use a constant-voltage power supply as the test power supply unless otherwise specified.
* The output noise voltage is the peak value measured with an averaging rms scale volt meter. The noise voltage waveform should not include
pulse noise.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
O3096HA (OT)/51694TH (OT) 5-2263 No. 4673-1/3
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet STK4034X.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| STK4034X | AF Power Amplifier | Sanyo Semicon Device |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |