DataSheet.jp

V23074-A1001-A403 の電気的特性と機能

V23074-A1001-A403のメーカーはTycoです、この部品の機能は「Relay」です。


製品の詳細 ( Datasheet PDF )

部品番号 V23074-A1001-A403
部品説明 Relay
メーカ Tyco
ロゴ Tyco ロゴ 




このページの下部にプレビューとV23074-A1001-A403ダウンロード(pdfファイル)リンクがあります。

Total 7 pages

No Preview Available !

V23074-A1001-A403 Datasheet, V23074-A1001-A403 PDF,ピン配置, 機能
www.DataSheet4U.com
Plug-in relays
Micro ISO relays
Micro power relay A
Features
– Limiting continuous currents
25/15 A at the NO contact/
NC contact
– Pin assignment to ISO 7588
part 3
– Positions of quick connect
terminals to ISO 7588 part 3
– Compact dimensions
Typical applications
– Heaters (seat, front/rear
windows)
– Motors (fan, pump, wiper)
– Valves, lifting magnets,
interlocks
– Headlights, lighting
Powertrain
Systems
Chassis
Systems
Safety
Security
Body
Driver
Convenience
Information
Car Industry
Truck
Industry
Design
Dustproof; protection class
IP 54 to IEC 60 529
(EN 60 529)
Optional cover markings;
color-coded
Weight
Approx. 0.5 - 0.7 oz. (16 - 20
g) depending on contact
Nominal voltage
12 V or 24 V, VFM (see page
82) also 6 V;
other nominal voltages
available on request
Terminals
Quick connect terminals
similar to ISO 8092-1
Coil and break contact
4.8 x 0.8 mm,
other load terminals
6.3 x 0.8 mm;
surfaces tin-plated
Accessories
Connectors see page 180
Special models on request
– 1 component (diode or
varistor) parallel to the coil
– Special labels
– Special cover shapes
Conditions
All parametric, environmental
and endurance tests are
performed according to
EIA Standard RS-407-A at
standard test conditions
unless otherwise noted:
23 °C ambient temperature,
20-50% RH, 29.5 ± 1.0" Hg
(998.9 ±33.9 hPa).
74_3d01
Other
Industry
All specifications subject to change. Consult Tyco Electronics AMP GmbH for latest specifications.
75

1 Page





V23074-A1001-A403 pdf, ピン配列
Plug-in relays
Micro ISO relays
www.DataSheet4U.com
Contact data
Typical areas of application
Contact configuration
Contact material
Circuit symbol
(see also Pin assignment)
Micro power relay A
12 V nominal voltage, test voltage 13 VDC
Resistive/inductive loads
Make contact/
Form A
Changeover contact/
Form C
AgNi0.15
Lamp loads
Make contact/
Changeover contact/
Form A
Form C
AgSnO2
Max. switching voltage
Max. switching power
Max. switching current1)
On 2)
Off
90 A
30 A
Limiting continuous current
at 23 °C
at 85 °C
25 A
15 A
Voltage drop (initial) at 10 A
Increase in coil temperature at 10 A load
Mechanical endurance (without load)
Electrical endurance
1) The values apply to a resistive load or inductive load with suitable spark suppression.
2) This current may flow for a maximum of 3 sec for a make/break ratio of 1 : 10.
3) Corresponds to the peak inrush current of a lamp on initial actuation (cold coil filament).
See load limit curve
See load limit curve
NC/NO
20/90 A
120 A3)
15/30 A
30 A
NC/NO
15/25 A
25 A
10/15 A
15 A
Typ. 20 mV
Typ. 5 °C
> 106 operations
See page 81
NC/NO
40/120 A
15/30 A
NC/NO
15/25 A
10/15 A
All specifications subject to change. Consult Tyco Electronics AMP GmbH for latest specifications.
77


3Pages


V23074-A1001-A403 電子部品, 半導体
Plug-in relays
Micro ISO relays
www.DataSheet4U.com
Operating conditions
Temperature range, storage
Test
Climatic cycling with condensation
Temperature cycling
Damp heat
cyclic
constant
Corrosive gas
Vibration resistance
Shock resistance
Load dump
Jump start
Drop test
Flammability
Micro power relay A
Relevant standard
EN ISO 6988
IEC 60 068-2-14
Testing as per
Nb
-40 °C to 155 °C
Dimension
6 cycles
10 cycles
IEC 60 068-2-30
Db, Variant 1
6 cycles
IEC 60 068-2-3
Ca
IEC 60 068-2-42
IEC 60 068-2-43
10 ± 2 cm3/m3 SO2
1 ± 0.3 cm3/m3 H2S
IEC 60 068-2-6 (sine pulse form)
10 days
10 days
10 days
20 - 500 Hz
acceleration, acc. to position
min. 5 g
IEC 60 068-2-27 (half-sine pulse form)
min. 20 g
acceleration, acc. to position
ISO 7637
DIN 40 839 Part 1
5 s 16 V
3 cycles
15 s 28 V
10 s 16 V
Capable of meeting specifications after 1.0 m (3.28 foot) drop onto concrete
UL94-HB
Temperature curves for the quick connect terminals
Parameter:
Ambient temperature Contact circuit release incl. connector
Comments
Storage 8/16 h
– 40/+ 85 °C (5 °C per min.)
Upper air temperature 55 °C
No change in the
switching state > 10 µsec
No change in the
switching state > 10 µsec
5.0 m
Normal connector
Coil voltage
2.5 m
High-quality connector
Contact current
80
All specifications subject to change. Consult Tyco Electronics AMP GmbH for latest specifications.

6 Page



ページ 合計 : 7 ページ
 
PDF
ダウンロード
[ V23074-A1001-A403 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
V23074-A1001-A403

Relay

Tyco
Tyco


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap