|
|
SBU4MのメーカーはPan Jit Internationalです、この部品の機能は「(SBU4x) SILICON SINGLE-PHASE BRIDGE RECTIFIER」です。 |
部品番号 | SBU4M |
| |
部品説明 | (SBU4x) SILICON SINGLE-PHASE BRIDGE RECTIFIER | ||
メーカ | Pan Jit International | ||
ロゴ | |||
このページの下部にプレビューとSBU4Mダウンロード(pdfファイル)リンクがあります。 Total 2 pages
SBU4A~SBU4M
SILICON SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE 50 to 1000 Volts CURRENT 4.0 Amperes
FEATURES
• Plastic material has Underwriters Laboratory
Flammability Classification 94V-O
• Ideal for printed circuit board
• Reliable low cost construction ulilizing molded pastic technique.
www.DataSheet4•UH.igchomtemperature soldering guaranteed:
260°C/10 seconds/.375"(9.5mm) lead length at 5 lbs. (2.3kg) tension
• In compliance with EU RoHS 2002/95/EC directives
MECHANICAL DATA
• Case: Reliable low cost construction utilizing
• molded plastic technique
• Terminals: Leads solderable per MIL-STD-750, Method 2026
• Mounting position: Any
• Mounting torque: 5 in. lb. Max.
• Weight: 0.2 ounce, 5.6 grams
MAXIMUM RATINGSAND ELECTRICALCHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
PARAMETER
SYMBOL SBU4A SBU4B SBU4D SBU4G SBU4J SBU4K SBU4M UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50 100 200 400 600 800 1000 V
Maximum RMS Bridge Input Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward T =100 OC
C
Rectified Output Current at T =40 OC
A
I2t Rating for fusing ( t<8.3ms)
VD C
I
F(AV )
I2 t
50 100 200 400 600 800 1000 V
4.0 A
166 A2sec
Peak Forward Surge Current single sine-wave superimposed on rated
load (JEDEC method)
IF S M
200 Apk
Maximum Forward Voltage Drop per Bridge Element at 4.0A
Maximum Reverse Leakage Current at Rated @ T =25OC
A
Dc Blocking Voltage @ T =100OC
A
Typical Thermal Resistance per leg (Note 2)
Typical Thermal Resistance per leg (Note 3)
Operating Junction and Storage Temperature Range
VF
IR
RθJ A
RθJ C
TJ,TS TG
0.98
3.0
1000
17.5
3.1
-55 to + 150
Vpk
uA
O C/W
OC
NOTES:
1. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw.
2. Units Mounted in free air, no heatsink, P.C.B at 0.375"(9.5mm) lead length with 0.5 x 0.5"(12 x 12mm)copper pads.
3. Units Mounted on a 2.0 x 1.6" x 0.3" thick (5 x 4 x 0.8cm) AL plate.
STAD-JAN.29.2007
PAGE . 1
1 Page | |||
ページ | 合計 : 2 ページ | ||
|
PDF ダウンロード | [ SBU4M データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
SBU4A | (SBU4x) 4 AMP SILICON BRIDGE RECTIFIERS | DIOTEC Electronics |
SBU4A | (SBU4x) SILICON SINGLE-PHASE BRIDGE RECTIFIER | Pan Jit International |
SBU4A | Diode ( Rectifier ) | American Microsemiconductor |
SBU4B | (SBU4x) 4 AMP SILICON BRIDGE RECTIFIERS | DIOTEC Electronics |