|
|
Número de pieza | P6SMB5x | |
Descripción | TVS Diode, SMD (Transient Voltage Suppressor) | |
Fabricantes | Pan Jit International | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de P6SMB5x (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! P6SMB SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE 5.5 to 214 Volts PEAK PULSE POWER 600 Watts
FEATURES
• For surface mounted applications in order to optimize board space.
• Low profile package
• Built-in strain relief
• Glass passivated junction
www.DataSheet4•UL.coowminductance
• Typical ID less than 1.0µA above 10V
• Plastic package has Underwriters Laboratory
Fammability Classification 94V-O
• High temperature soldering : 260°C /10 seconds at terminals
• In compliance with EU RoHS 2002/95/EC directives
SMB/DO-214AA
.185(4.70)
.160(4.06)
Unit: inch (mm)
.012(.305)
.006(.152)
MECHANICAL DATA
• Case: JEDEC DO-214AA ,Molded plastic over passivated junction
• Terminals: Solder plated,solderable per MIL-STD-750,Method 2026
• Polarity: Color band denotes positive end (cathode)
• Standard Packaging:12mm tape (EIA-481)
• Weight: 0.003 ounce, 0.093 gram
.050(1.27)
.030(0.76)
.008(.203)
.002(.051)
.220(5.59)
.200(5.08)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
Rating
Peak Pulse Power Dissipation on 10/1000uS waveform (Notes 1,2, Fig.1)
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method) (Notes 2,3)
Peak Pulse Current on 10/1000us waveform(Note 1)Fig.3
Operating Junction and Storage Temperature Range
Symbol
PPPM
IFSM
IPPM
TJ,TSTG
Value
600
100
see Table 1
-55 to +150
Units
Watts
Amps
Amps
OC
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 OC per Fig. 2.
2. Mounted on 5.0mm2 (0.13mm thick) land areas.
3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute
maximum.
STAD-MAY.25.2007
PAGE . 1
1 page P6SMB SERIES
MOUNTING PAD LAYOUT
www.DataSheet4U.com
ORDER INFORMATION
• Packing information
T/R - 3K per 13" plastic Reel
T/R - 0.5Kper 7” plastic Reel
LEGAL STATEMENT
Copyright PanJit International, Inc 2007
The information presented in this document is believed to be accurate and reliable. The specifications and information herein
are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit
does not convey any license under its patent rights or rights of others.
STAD-MAY.25.2007
PAGE . 5
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet P6SMB5x.PDF ] |
Número de pieza | Descripción | Fabricantes |
P6SMB51 | Surface Mount Transient Voltage Suppressor | Taiwan Semiconductor Company |
P6SMB51 | 600 Watts Surface Mount Transient Voltage Suppressor | Fuji Electric |
P6SMB51 | TVS Diode, SMD (Transient Voltage Suppressor) | Pan Jit International |
P6SMB510A | Glass Passivated Junction Transient Voltage Suppressor | Luguang Electronic |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |