|
|
PDF SCL1700 Data sheet ( Hoja de datos )
| Número de pieza | SCL1700 | |
| Descripción | Inclinometer Subassembly | |
| Fabricantes | VTI technologies | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SCL1700 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
SCL1700 Series
Inclinometer Subassembly
Preliminary
FEATURES
• Available range: ±10 °
• DC…3 Hz sensing bandwidth (controlled frequency response)
• Easy to use and design in
• 0.001 ° resolution analogue output
• 0.2 ° accuracy
• Dual axis inclination measurement
• Advanced failure detection
BENEFITS
• Excellent long term stability
• Sensing element filtered high frequency vibration
• Outstanding shock durability
APPLICATIONS
• Platform tilt measurement
• Equipment and instrument condition monitoring
• Inclination based position measurement
ELECTRICAL CHARACTERISTICS
Parameter
Condition
Min
Supply voltage (1
Current consumption
Output load
Operating temperature
Mechanical shock
Resistive
Capacitive
1 m drop on concrete
7
-40
Typ.
15
4.5
T.B.D
T.B.D.
20 000
Max
28
85
Units
V
mA
kOhm
nF
°C
g
PERFORMANCE CHARACTERISTICS
Parameter
Measuring range (1
Measuring axis
Offset(2,3
Offset calibration error (3,4
Offset temperature error (3,5
Sensitivity (3,6
Sensitivity calibration error(3,7
Sensitivity temperature error(3,8
Nonlinearity (9
Frequency responce -3 dB
Output noise
Condition
(See “Directions”)
Output at 0 °
0…70 °C
-25…85 °C
@ 0 ° (offset position)
0…70 °C
-25…85 °C
DC...10 Hz
SCL1700-D01
±10
X-Y
2.5
±0.1
±0.2
±1
200
±1
±0.5
±1
±0.03
1...3
0.001
Units
°
V
°
°
°
mV/°
%
%
%
°
Hz
°
Typical values @ room temperature, 15 V supply unless otherwise specified.
For customized product please contact VTI Technologies
Note 1.
Note 2.
Note 3.
Note 4.
Note 5.
Note 6.
The measuring range is limited by sensitivity, offset and supply voltage rails of the device.
Offset specified as Voffset = Vout(@0 °) [V].
+15 V supply voltage used in calibration and testing.
Offset calibration error specified as Offset_Calib_error = arcsin(Offset_Calib_error_in_g) [ ° ],
Offset_Calib_error_in_g = {Vout(@0 °) – 2.5 V} / Vsens [g], Vsens=11.46 V/g.
Offset temperature error specified as
Offset_Error_@_temp. = arcsin(Offset_Error_@_temp_in_g) [ ° ],
Offset_Error_@_temp_in_g = {Vout @ temp. – Vout @ room temp.} / Vsens [g], Vsens=11.46 V/g.
Sensitivity target in calibration Vsens _nom 11.46 V/g (--> 200 mV/°)
Sensitivity specified as Vsens = {Vout(@+10 °) - Vout(@+10 °)}/(2*sin(10 °) g) [V/g].
Note 7.
Note 8.
Note 9.
Sensitivity calibration error specified as
Sensitivity_calibr_error = {Vsens - Vsens_nom} / Vsens_nom x 100 % [%],
Vsens_nom = nominal sensitivity.
Sensitivity temperature error specified as
Sensitivity_temp_error = {Vsens @ temp – Vsens @ room temp} / Vsens @ room temp} x 100 % [%].
From best fit sine-function to output through –10 ° and +10 °.
Rev. 10 Sept 2004
VTI Technologies reserves the right to modify this specification without prior to notice.
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet SCL1700.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SCL1700 | Inclinometer Subassembly | VTI technologies |
| SCL1700-D01 | SCL1700-D01 | VTI technologies |
| SCL1700-D11 | SCL1700-D11 | VTI technologies |
| SCL1700-D31 | SCL1700-D31 | VTI technologies |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |