|
|
Número de pieza | VS-502 | |
Descripción | Voltage Controlled SAW Oscillator | |
Fabricantes | Vectron International | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de VS-502 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! Product Data Sheet
PRELIMINARY
VS-502
Voltage Controlled SAW Oscillator
www.DataSheet4U.com
Features
• Output frequencies from 300 MHz to 1350 MHz
• Ultra low jitter < 0.2 ps-rms (12 kHz to 20 MHz)
< 0.2 ps-rms (50 kHz to 80 MHz)
• Low phase noise, -160 dBc/Hz @ 1 MHz offset (1 GHz)
• Small low profile 9.0 * 14.0 * 4.5 mm SMT package
• 3.3 V, 5.0 V and 12V Supply Options
• LV-PECL, PECL, or Sinewave (0 to +10 dBm into 50 Ώ)
• Output disable feature (For LVPECL - PECL option)
Product is free of lead and compliant to
EC RoHS Directive
Applications
• Point to Point / Point to Multi Point Radios
• Instrumentation
• PLL Frequency Translation
• Test & Measurement
• Military & Avionics
Description
The VS-502 is a SAW based voltage controlled oscillator that
operates at the fundamental frequency of the internal SAW
resonator. This direct approach enables this series to achieve
low phase noise and jitter performance at high output
frequencies and over wide operating temperature range. The
oscillator is housed in a hermetically sealed J-lead surface
mount package offered on tape and reel. As an option, it has
an output disable to facilitate on-board test
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
1
Tel: 1-88-VECTRON-1 Website: www.vectron.com
Rev: 27January06
1 page VS-502 Voltage Controlled SAW Oscillator
Table 4. Pin Out – Sinewave Option
Pin Symbol
Function
1 VC
2-
VCSO Control Voltage
N/C
3 VEE
Ground
4 Output
VCSO Sinewave Output
5 VCC
Vcc21
6 VCC
Vcc1
Table Notes:
1. If Vcc1 is +12V and a separate 5V is not applied to pin 5 then pin 5 must be connected through a 220Ώ 1/4W external resistor.
Suggested Output Load Configurations – SINEWAVE Operation
From PLL
NC
+12V
Vcc
0.1uF
1 6 220 Ώ
1/4W
25
0.01uF
34
0.01uF
Output AC Coupled with
50 Ώ to ground
From PLL
NC
+5V 0.1uF
Vcc
16
25
34
0.01uF
0.01uF
Output AC Coupled with
50 Ώ to ground
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
5
Tel: 1-88-VECTRON-1 Website: www.vectron.com
Rev: 27January06
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet VS-502.PDF ] |
Número de pieza | Descripción | Fabricantes |
VS-500 | Voltage Controlled SAW Oscillator | Vectron International |
VS-500A | Voltage Controlled Saw Oscillator | Vectron International |
VS-502 | Voltage Controlled SAW Oscillator | Vectron International |
VS-50MT060WHTAPbF | IGBT MTP | Vishay |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |