|
|
Número de pieza | AD7783 | |
Descripción | Pin Configured 24-Bit ADC | |
Fabricantes | Analog Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AD7783 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! a
www.DataSheet4U.com
FEATURES
2-Channel, 24-Bit ⌺-⌬ ADC
Pin Configurable (No Programmable Registers)
Pin Selectable Input Channels
Pin Programmable Input Ranges (؎2.56 V or ؎160 mV)
Fixed 19.79 Hz Update Rate
Simultaneous 50 Hz and 60 Hz Rejection
ISOURCE Select™
24-Bit No Missing Codes
18.5-Bit p-p Resolution (؎2.56 V Range)
16.5-Bit p-p Resolution (؎160 mV Range)
INTERFACE
Master or Slave Mode of Operation
Slave Mode
3-Wire Serial
SPI™, QSPI™, MICROWIRE™, and DSP-Compatible
Schmitt Trigger on SCLK
POWER
Specified for Single 3 V and 5 V Operation
Normal: 1.3 mA@ 3 V
Power-Down: 9 A
ON-CHIP FUNCTIONS
Rail-Rail Input Buffer and PGA
APPLICATIONS
Sensor Measurement
Industrial Process Control
Temperature Measurement
Pressure Measurements
Weigh Scales
Portable Instrumentation
Read Only, Pin Configured
24-Bit ⌺-⌬ ADC
IOUT1
IOUT2
IPIN
AIN(+)
AIN(–)
AD7783
FUNCTIONAL BLOCK DIAGRAM
VDD
GND
REFIN(+) REFIN(–) XTAL1 XTAL2
VDD
IEXC1
IEXC2
200A
200A
OSCILLATOR
AND
PLL
MUX BUF
PGA
24-BIT ⌺-⌬
ADC
SERIAL
INTERFACE
AND
CONTROL
LOGIC
DOUT/RDY
SCLK
MODE
AD7783
CS
RANGE
BASIC CONNECTION DIAGRAM
ANALOG
INPUT
CURRENT
SOURCES
REFERENCE
INPUT
POWER SUPPLY
VDD
AD7783
AIN(+)
AIN(–)
IOUT1
IOUT2
REFIN(+)
REFIN(–)
CS
DOUT/RDY
SCLK
XTAL1
XTAL2
GND
DIGITAL
INTERFACE
32.768kHz
CRYSTAL
GENERAL DESCRIPTION
The AD7783 is a complete analog front end for low-frequency
measurement applications. The 24-bit sigma-delta ADC contains
one fully differential input channel that can be configured with a
gain of 1 or 16 allowing full-scale input signal ranges of ±2.56 V or
±160 mV from a +2.5 V differential reference input. It also contains
two 200 µA integrated current sources.
The AD7783 has an extremely simple, read-only digital interface
which can be operated in master mode or slave mode. There
are no on-chip registers to be programmed. The input signal
range and current source selection are configured using two exter-
nal pins.
The device operates from a 32.768 kHz crystal with an on-chip
PLL generating the required internal operating frequency. The
output data rate from the part is fixed via the master clock at
19.79 Hz and provides simultaneous 50 Hz and 60 Hz rejection
at this update rate. Eighteen-bit p-p resolution can be obtained
at this update rate.
The part operates from a single 3 V or 5 V supply. When operating
from 3 V supplies, the power dissipation for the part is 3.9 mW.
The AD7783 is available in a 16-lead TSSOP package.
Another part in the AD778x family is the AD7782. It is similar to
the AD7783 except it has no integrated current sources and two
differential input channels.
ISOURCE Select is a trademark of Analog Devices, Inc.
SPI and QSPI are trademarks of Motorola Inc.
MICROWIRE is a trademark of National Semiconductor Corporation.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 2001
1 page AD7783
CS (I)
DOUT/RDY (O)
t2
t3
MSB
LSB
MSB
SLAVE MODE
SCLK (I)
MASTER MODE
SCLK (O)
t4
t4
t10
t6
t5
t6
t5
t9
I = INPUT TO AD7783, O = OUTPUT FROM AD7783
SLAVE MODE IS SELECTED BY TYING THE MODE PIN LOW, WHILE MASTER MODE IS SELECTED BY TYING THE MODE PIN HIGH.
Figure 2. Slave/Master Mode Timing Diagram
t8
LSB
t7
ABSOLUTE MAXIMUM RATINGS*
(TA = 25°C unless otherwise noted)
VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V
Analog Input Voltage to GND . . . . . . . –0.3 V to VDD + 0.3 V
Reference Input Voltage to GND . . . . –0.3 V to VDD + 0.3 V
Total AIN/REFIN Current (Indefinite) . . . . . . . . . . . . . 30 mA
Digital Input Voltage to GND . . . . . . . . –0.3 V to VDD + 0.3 V
Digital Output Voltage to GND . . . . . –0.3 V to VDD + 0.3 V
Operating Temperature Range . . . . . . . . . . . –40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
www.DataSheet4U.com
TSSOP Package
θJA Thermal Impedance . . . . . . . . . . . . . . . . . . . . .97.9°C/W
θJC Thermal Impedance . . . . . . . . . . . . . . . . . . . . . . 14°C/W
Lead Temperature, Soldering
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . . . 215°C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°C
*Stresses above those listed under Absolute Maximum Ratings may cause per-
manent damage to the device. This is a stress rating only; functional operation of
the device at these or any other conditions above those listed in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
ORDERING GUIDE
Model
AD7783BRU
EVAL-AD7783EB
Temperature Range
–40°C to +85°C
Package Description
TSSOP
Evaluation Board
Package Option
RU-16
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the AD7783 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. 0
–5–
5 Page www.DataSheet4U.com
–11–
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet AD7783.PDF ] |
Número de pieza | Descripción | Fabricantes |
AD7780 | 24-Bit Pin-Programmable Low Power ADC | Analog Devices |
AD7781 | Low Power Sigma-Delta ADC | Analog Devices |
AD7782 | Read Only/ Pin Configured 24-Bit ADC | Analog Devices |
AD7783 | Pin Configured 24-Bit ADC | Analog Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |