DataSheet.jp

2SA1615 の電気的特性と機能

2SA1615のメーカーはNECです、この部品の機能は「PNP SILICON EPITAXIAL TRANSISTOR」です。


製品の詳細 ( Datasheet PDF )

部品番号 2SA1615
部品説明 PNP SILICON EPITAXIAL TRANSISTOR
メーカ NEC
ロゴ NEC ロゴ 




このページの下部にプレビューと2SA1615ダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

2SA1615 Datasheet, 2SA1615 PDF,ピン配置, 機能
DATA SHEET
SILICON POWER TRANSISTORS
2SA1615, 1615-Z
PNP SILICON EPITAXIAL TRANSISTOR
FOR HIGH-SPEED SWITCHING
The 2SA1615 and 1615-Z are available for the large current control in small dimension due to the low saturation
and are ideal for high-efficiency DC/DC converters due to the fast switching speed.
FEATURES
• Large current capacity:
IC(DC): 10 A, IC(pulse): 15 A
• High hFE and low collector saturation voltage:
hFE = 200 MIN. (@VCE = 2.0 V, IC = 0.5 A)
VCE(sat) ≤ −0.25 V (@IC = 4.0 A, IB = 0.05 A)
QUALITY GRADES
• Standard
Please refer to “Quality Grades on NEC Semiconductor Devices” (Document No. C11531E) published by NEC
www.DataSheet4U.com Corporation to know the specification of quality grade on the devices and its recommended applications.
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
Parameter
Symbol
Collector to base voltage
VCBO
Collector to emitter voltage
VCEO
Emitter to base voltage
VEBO
Collector current (DC)
IC(DC)
Collector current (pulse)
IC(pulse)*
Base current (DC)
Total power dissipation
IB(DC)
PT (Ta = 25°C)**
Total power dissipation
PT (Tc = 25°C)
Junction temperature
Tj
Storage temperature
Tstg
* PW 10 ms, duty cycle 50%
** Printing board mounted
Ratings
30
20
10
10
15
0.5
1.0
15
150
55 to +150
Unit
V
V
V
A
A
A
W
W
°C
°C
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D16119EJ1V0DS00 (1st edition)
Date Published April 2002 N CP(K)
Printed in Japan
©
2002

1 Page





2SA1615 pdf, ピン配列
TYPICAL CHARACTERISTICS (Ta = 25 °C)
2SA1615, 1615-Z
Case Temperature TC (°C)
Case Temperature TC (°C)
Single pulse
Collector to Emitter Voltage VCE (V)
–15
–10
–5
Base to Emitter Voltage VBE (V)
Collector to Emitter Voltage VCE (V)
Collector Current IC (A)
Data Sheet D16119EJ1V0DS
3


3Pages


2SA1615 電子部品, 半導体
2SA1615, 1615-Z
The information in this document is current as of July, 2001. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ 2SA1615 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
2SA1610

HIGH SPEED SWITCHING PNP SILICON EPITAXIAL TRANSISTOR

NEC
NEC
2SA1611

AUDIO FREQUENCY GENERAL PURPOSE AMPLIFIER PNP SILICON EPITAXIAL TRANSISTOR

NEC
NEC
2SA1611

Transistor

TRANSYS
TRANSYS
2SA1611

Transistor

Kexin
Kexin


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap