VP5513 Datasheet PDF - Zarlink Semiconductor
| Part Number | VP5513 | |
| Description | (VP5313 / VP5513) NTSC/PAL Digital Video Encoder | |
| Manufacturers | Zarlink Semiconductor | |
| Logo |  |
|
|
There is a preview and VP5513 download ( pdf file ) link at the bottom of this page. Total 19 Pages | ||
Preview 1 page No Preview Available !
This product is obsolete.
This information is available for your
convenience only.
www.DataSheet4U.com
For more information on
Zarlink’s obsolete products and
replacement product lists, please visit
http://products.zarlink.com/obsolete_products/
|
| |
 
VP5313/VP5513
PIN DESCRIPTIONS
Pin Name
PD0-7
PXCK
Pin No.
2-4,
38-42
44
SA
SCL
SDA
FC0-2
REFSQ
SCSYNC
PALID
COMPSYNC
CLAMP
18
23
24
12-14
9
8
7
6
5
TTXREQ
TTXDATA
HSYNC
VSYNC
RESET
VREF
RREF
17
19
15
16
22
33
34
DACCOMP
CVBS1
25
32
BLUE/CVBS2
GREEN/Y
RED/C
VDD
AVDD
GND
AGND
31
27
26
1, 11, 20
37,28,30
10,21,43
36,29,35
Description
8 Bit Pixel Data inputs clocked by PXCK. PD0 is the least significant bit. These pins are
internally pulled low.
27MHz Pixel Clock input. The VP5313/VP5513 internally divides PXCK by two to provide the
pixel clock.
Slave address select.
Standard I2C bus serial clock input.
Standard I2C bus serial data input/output.
Field Counter output in master sync mode.
Reference square wave input used only during Genlock mode.
Subcarrier sync input, (synchronises phase quadrant in 4xfsc genlock mode), see fig 6.
PAL IDENT input, controls swinging colour burst phase in PAL genlock mode.
Composite sync pulse output. This is an active low output signal.
The CLAMP output signal is synchronised to COMPSYNC output and indicates the position of
the BURST pulse, (lines 10-263 and 273-525 for NTSC; lines 6-310 and 319-623 for PAL-
B,D,G,I,N(Argentina)).
Teletext Data Request output, requests next line of teletext data.
Teletext Data input.
Horizontal Sync, output in master mode, input in slave mode
Vertical Sync, output in master mode, input in slave mode
Master reset. This is an asynchronous, active low, input signal and must be asserted for a
minimum 200ns in order to reset the VP5313/VP5513.
Voltage reference output. This output is nominally 1·0V and should be decoupled with a
100nF capacitor to GND.
DAC full scale current control. A resistor connected between this pin and GND sets the
magnitude of the video output current. An internal loop amplifier controls a reference current
flowing through this resistor so that the voltage across it is equal to the Vref voltage. This
reference current has a weighting equal to 20.8 LSB’s.
DAC compensation. A 100nF ceramic capacitor must be connected to AVDD.
Composite video output. These are high impedance current source outputs. A DC path to
GND must exist from each of these pins.
Blue or composite DAC output. Output type as CVBS1.
Green or luminance DAC output. Output type as CVBS1.
Red or chrominance DAC output. Output type as CVBS1.
Positive supply input. All VDD pins must be connected.
Analog positive supply input. All AVDD pins must be connected.
Negative supply input. All GND pins must be connected.
Analog negative supply input. All AGND pins must be connected.
4
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for VP5513 electronic component. |
| Information | Total 19 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ VP5513.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| VP5511B | The function is (VP5311B / VP5511B) NTSC/PAL Digital Video Encoder. Zarlink Semiconductor | |
| VP5511BCGGP1N | The function is NTSC/PAL Digital Video Encoder. Mitel Networks Corporation |  |
| VP5511C | The function is (VP5311C / VP5511C) NTSC/PAL Digital Video Encoder. Zarlink Semiconductor | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
VP55
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||