|
|
S25FL016AのメーカーはSPANSIONです、この部品の機能は「16 Megabit CMOS 3.0 Volt Flash Memory」です。 |
部品番号 | S25FL016A |
| |
部品説明 | 16 Megabit CMOS 3.0 Volt Flash Memory | ||
メーカ | SPANSION | ||
ロゴ | |||
このページの下部にプレビューとS25FL016Aダウンロード(pdfファイル)リンクがあります。 Total 30 pages
V
S25FL016A
16 Megabit CMOS 3.0 Volt Flash Memory
with 50-MHz SPI (Serial Peripheral Interface) Bus
Data Sheet
S25FL016A Cover Sheet
This product has been retired and is not recommended for designs. For new and current designs,
S25FL032P supercedes S25FL016A. This is the factory-recommended migration path. Please refer to the
S25FL032P data sheet for specifications and ordering information.
Availability of this document is retained for reference and historical purposes only.
Notice to Readers: This document states the current technical specifications regarding the Spansion
product(s) described herein. Spansion Inc. deems the products to have been in sufficient production volume
such that subsequent versions of this document are not expected to change. However, typographical or
specification corrections, or modifications to the valid combinations offered may occur.
Publication Number S25FL016A_00
Revision C Amendment 4
Issue Date February 27, 2009
1 Page S25FL016A
16 Megabit CMOS 3.0 Volt Flash Memory
with 50-MHz SPI (Serial Peripheral Interface) Bus
Data Sheet
This product has been retired and is not recommended for designs. For new and current designs, S25FL032P supercedes
S25FL016A. This is the factory-recommended migration path. Please refer to the S25FL032P data sheet for specifications and
ordering information.
Distinctive Characteristics
Architectural Advantages
Single power supply operation
– Full voltage range: 2.7 to 3.6 V read and program operations
Memory Architecture
– Thirty-two sectors with 512 Kb each
Program
– Page Program (up to 256 bytes) in 1.4 ms (typical)
– Program operations are on a page by page basis
Erase
– 0.5 s typical sector erase time
– 10 s typical bulk erase time
Cycling Endurance
– 100,000 cycles per sector typical
Data Retention
– 20 years typical
Device ID
– JEDEC standard two-byte electronic signature
– RES command one-byte electronic signature for backward
compatibility
Process Technology
– Manufactured on 0.20 µm MirrorBit® process technology
Package Option
– Industry Standard Pinouts
– 16-pin SO package (300 mils)
– 8-pin SO package (208 mils)
– 8-Contact WSON Package (6x8 mm), Pb Free
Performance Characteristics
Speed
– 50 MHz clock rate (maximum)
Power Saving Standby Mode
– Standby Mode 50 µA (max)
– Deep Power Down Mode 1.3 µA (typical)
Memory Protection Features
Memory Protection
– W# pin works in conjunction with Status Register Bits to protect
specified memory areas
– Status Register Block Protection bits (BP2, BP1, BP0) in status
register configure parts of memory as read-only
Software Features
– SPI Bus Compatible Serial Interface
General Description
The S25FL016A is a 3.0 Volt (2.7 V to 3.6 V), single-power-supply Flash memory device. The device consists
of thirty-two sectors, each with 512 Kb memory.
The device accepts data written to SI (Serial Input) and outputs data on SO (Serial Output). The devices are
designed to be programmed in-system with the standard system 3.0 volt VCC supply.
The memory can be programmed 1 to 256 bytes at a time, using the Page Program command. The device
supports Sector Erase and Bulk Erase commands.
Each device requires only a 3.0 volt power supply (2.7 V to 3.6 V) for both read and write functions. Internally
generated and regulated voltages are provided for the program operations. This device does not require a
VPP supply.
Publication Number S25FL016A_00
Revision C Amendment 4
Issue Date February 27, 2009
This document states the current technical specifications regarding the Spansion product(s) described herein. Spansion Inc. deems the products to have been in sufficient pro-
duction volume such that subsequent versions of this document are not expected to change. However, typographical or specification corrections, or modifications to the valid com-
binations offered may occur.
3Pages Data Sheet
Tables
Table 5.1
Table 7.1
Table 8.1
Table 8.2
Table 9.1
Table 9.2
Table 9.3
Table 9.4
Table 10.1
Table 12.1
Table 13.1
Table 14.1
Table 15.1
Table 16.1
S25FL016A Valid Combinations Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
S25FL016A Protected Area Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
S25FL016A Device Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
S25FL016A Sector Address Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Read Identification (RDID) Data-Out Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
S25FL016A Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Protection Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Command Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Power-Up Timing Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Operating Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
DC Characteristics (CMOS Compatible) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Test Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
AC Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
6
S25FL016A
S25FL016A_00_C4 February 27, 2009
6 Page | |||
ページ | 合計 : 30 ページ | ||
|
PDF ダウンロード | [ S25FL016A データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
S25FL016A | 16 Megabit CMOS 3.0 Volt Flash Memory | SPANSION |
S25FL016K | 4-Mbit / 8-Mbit / 16-Mbit CMOS 3.0 Volt Flash Memory | SPANSION |