DataSheet.jp

MC34071 の電気的特性と機能

MC34071のメーカーはON Semiconductorです、この部品の機能は「Single Supply 3.0 V to 44 V Operational Amplifiers」です。


製品の詳細 ( Datasheet PDF )

部品番号 MC34071
部品説明 Single Supply 3.0 V to 44 V Operational Amplifiers
メーカ ON Semiconductor
ロゴ ON Semiconductor ロゴ 




このページの下部にプレビューとMC34071ダウンロード(pdfファイル)リンクがあります。

Total 26 pages

No Preview Available !

MC34071 Datasheet, MC34071 PDF,ピン配置, 機能
MC34071,2,4,A
MC33071,2,4,A,
NCV33072,4,A
Single Supply 3.0 V to 44 V
Operational Amplifiers
Quality bipolar fabrication with innovative design concepts are
employed for the MC33071/72/74, MC34071/72/74, NCV33072/74A
series of monolithic operational amplifiers. This series of operational
amplifiers offer 4.5 MHz of gain bandwidth product, 13 V/ms slew rate
and fast settling time without the use of JFET device technology.
Although this series can be operated from split supplies, it is
particularly suited for single supply operation, since the common
mode input voltage range includes ground potential (VEE). With a
Darlington input stage, this series exhibits high input resistance, low
input offset voltage and high gain. The all NPN output stage,
characterized by no deadband crossover distortion and large output
voltage swing, provides high capacitance drive capability, excellent
phase and gain margins, low open loop high frequency output
impedance and symmetrical source/sink AC frequency response.
The MC33071/72/74, MC34071/72/74, NCV33072/74,A series of
devices are available in standard or prime performance (A Suffix)
grades and are specified over the commercial, industrial/vehicular or
military temperature ranges. The complete series of single, dual and
quad operational amplifiers are available in plastic DIP, SOIC, QFN
and TSSOP surface mount packages.
Features
Wide Bandwidth: 4.5 MHz
High Slew Rate: 13 V/ms
Fast Settling Time: 1.1 ms to 0.1%
Wide Single Supply Operation: 3.0 V to 44 V
Wide Input Common Mode Voltage Range: Includes Ground (VEE)
Low Input Offset Voltage: 3.0 mV Maximum (A Suffix)
Large Output Voltage Swing: −14.7 V to +14 V (with ±15 V
Supplies)
Large Capacitance Drive Capability: 0 pF to 10,000 pF
Low Total Harmonic Distortion: 0.02%
Excellent Phase Margin: 60°
Excellent Gain Margin: 12 dB
Output Short Circuit Protection
ESD Diodes/Clamps Provide Input Protection for Dual and Quad
NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
http://onsemi.com
8
1
8
1
PDIP−8
P SUFFIX
CASE 626
SOIC−8
D SUFFIX
CASE 751
WQFN10
MT SUFFIX
CASE 510AJ
14
1
14
1
PDIP−14
P SUFFIX
CASE 646
SOIC−14
D SUFFIX
CASE 751A
14
1
TSSOP−14
DTB SUFFIX
CASE 948G
ORDERING INFORMATION
See detailed ordering and shipping information on page 18 of
this data sheet.
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 21 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
July, 2014 − Rev. 22
1
Publication Order Number:
MC34071/D

1 Page





MC34071 pdf, ピン配列
MC34071,2,4,A MC33071,2,4,A, NCV33072,4,A
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Supply Voltage (from VEE to VCC)
VS +44
V
Input Differential Voltage Range
VIDR
(Note 1)
V
Input Voltage Range
VIR (Note 1)
V
Output Short Circuit Duration (Note 2)
tSC Indefinite Sec
Operating Junction Temperature
TJ +150 °C
Storage Temperature Range
Tstg −60 to +150
°C
ESD Capability, Dual and Quad (Note 3)
Human Body Model
Machine Model
ESDHBM
ESDMM
2000
200
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Either or both input voltages should not exceed the magnitude of VCC or VEE.
2. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded (see Figure 2).
3. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per AEC−Q100−002 (JEDEC standard: JESD22−A114)
ESD Machine Model tested per AEC−Q100−003 (JEDEC standard: JESD22−A115)
http://onsemi.com
3


3Pages


MC34071 電子部品, 半導体
MC34071,2,4,A MC33071,2,4,A, NCV33072,4,A
2400
2000
1600
SOIC-14 Pkg 8 & 14 Pin Plastic Pkg
1200
800
SOIC-8 Pkg
400
0
-55 -40 -20
0 20 40 60 80 100 120 140 160
TA, AMBIENT TEMPERATURE (°C)
Figure 4. Maximum Power Dissipation versus
Temperature for Package Types
4.0 VCC = +15 V
VEE = -15 V
VCM = 0
2.0
0
-2.0
-4.0
-55
-25 0 25 50 75 100
TA, AMBIENT TEMPERATURE (°C)
Figure 5. Input Offset Voltage versus
Temperature for Representative Units
125
VCC
VCC -0.8
VCC VCC/VEE = +1.5 V/ -1.5 V to +22 V/ -22 V
VCC -1.6
VCC -2.4
VEE +0.01
VEE
-55
VEE
-25 0
25 50 75 100 125
TA, AMBIENT TEMPERATURE (°C)
Figure 6. Input Common Mode Voltage
Range versus Temperature
1.3
VCC = +15 V
1.2 VEE = -15 V
VCM = 0
1.1
1.0
0.9
0.8
0.7
-55
-25 0 25 50 75
TA, AMBIENT TEMPERATURE (°C)
100
125
Figure 7. Normalized Input Bias Current
versus Temperature
1.4
VCC = +15 V
VEE = -15 V
1.2 TA = 25°C
1.0
0.8
0.6
-12
-8.0 -4.0
0
4.0 8.0
VIC, INPUT COMMON MODE VOLTAGE (V)
12
Figure 8. Normalized Input Bias Current versus
Input Common Mode Voltage
50
RL Connected
40 to Ground TA = 25°C
30
RL = 10 k
RL = 2.0 k
20
10
0
0 5.0 10 15 20 25
VCC, |VEE|, SUPPLY VOLTAGE (V)
Figure 9. Split Supply Output Voltage
Swing versus Supply Voltage
http://onsemi.com
6

6 Page



ページ 合計 : 26 ページ
 
PDF
ダウンロード
[ MC34071 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
MC34071

HIGH BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS

Motorola Semiconductors
Motorola Semiconductors
MC34071

Single Supply 3.0 V to 44 V Operational Amplifiers

ON Semiconductor
ON Semiconductor
MC34071A

Single Supply 3.0 V to 44 V Operational Amplifiers

ON Semiconductor
ON Semiconductor
MC34072

HIGH BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS

Motorola Semiconductors
Motorola Semiconductors


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap