DataSheet.jp

MC14011UBCP の電気的特性と機能

MC14011UBCPのメーカーはON Semiconductorです、この部品の機能は「UB-Suffix Series CMOS Gates」です。


製品の詳細 ( Datasheet PDF )

部品番号 MC14011UBCP
部品説明 UB-Suffix Series CMOS Gates
メーカ ON Semiconductor
ロゴ ON Semiconductor ロゴ 




このページの下部にプレビューとMC14011UBCPダウンロード(pdfファイル)リンクがあります。

Total 8 pages

No Preview Available !

MC14011UBCP Datasheet, MC14011UBCP PDF,ピン配置, 機能
MC14001UB, MC14011UB
UB-Suffix Series
CMOS Gates
The UB Series logic gates are constructed with P and N channel
enhancement mode devices in a single monolithic structure
(Complementary MOS). Their primary use is where low power
dissipation and/or high noise immunity is desired. The UB set of
CMOS gates are inverting non–buffered functions.
Supply Voltage Range = 3.0 Vdc to 18 Vdc
Linear and Oscillator Applications
Capable of Driving Two Low–power TTL Loads or One Low–power
Schottky TTL Load Over the Rated Temperature Range
Double Diode Protection on All Inputs
Pin–for–Pin Replacements for Corresponding CD4000 Series UB
Suffix Devices
MAXIMUM RATINGS (Voltages Referenced to VSS) (Note 1.)
Symbol
Parameter
Value
VDD
Vin, Vout
DC Supply Voltage Range
Input or Output Voltage Range
(DC or Transient)
– 0.5 to +18.0
– 0.5 to VDD + 0.5
Unit
V
V
Iin, Iout
Input or Output Current
(DC or Transient) per Pin
± 10 mA
PD Power Dissipation,
per Package (Note 2.)
500 mW
TA Ambient Temperature Range
Tstg Storage Temperature Range
TL Lead Temperature
(8–Second Soldering)
– 55 to +125
– 65 to +150
260
°C
°C
°C
1. Maximum Ratings are those values beyond which damage to the device
may occur.
2. Temperature Derating:
Plastic “P and D/DW” Packages: – 7.0 mW/_C From 65_C To 125_C
This device contains protection circuitry to guard against damage due to high
static voltages or electric fields. However, precautions must be taken to avoid
applications of any voltage higher than maximum rated voltages to this
v vhigh–impedance circuit. For proper operation, Vin and Vout should be constrained
to the range VSS (Vin or Vout) VDD.
Unused inputs must always be tied to an appropriate logic voltage level (e.g.,
either VSS or VDD). Unused outputs must be left open.
http://onsemi.com
MC14001UB
Quad 2–Input NOR Gate
MC14011UB
Quad 2–Input NAND Gate
PDIP–14
P SUFFIX
CASE 646
MARKING
DIAGRAMS
14
MC140XXUBCP
AWLYYWW
1
SOIC–14
D SUFFIX
CASE 751A
14
140XXU
AWLYWW
1
XX = Specific Device Code
A = Assembly Location
WL or L = Wafer Lot
YY or Y = Year
WW or W = Work Week
ORDERING INFORMATION
Device
Package
Shipping
MC14001UBCP PDIP–14
2000/Box
MC14001UBD
SOIC–14
55/Rail
MC14001UBDR2 SOIC–14 2500/Tape & Reel
MC14011UBCP PDIP–14
2000/Box
MC14011UBD
SOIC–14
55/Rail
MC14011UBDR2 SOIC–14 2500/Tape & Reel
© Semiconductor Components Industries, LLC, 2000
March, 2000 – Rev. 3
1
Publication Order Number:
MC14001UB/D

1 Page





MC14011UBCP pdf, ピン配列
MC14001UB, MC14011UB
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎELECTRICAL CHARACTERISTICS (Voltages Referenced to VSS)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCharacteristic
VDD – 55_C
25_C
125_C
Symbol Vdc Min Max Min Typ (3.) Max Min Max
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎOutput Voltage
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVin= VDDor0
“0” Level VOL
5.0
10
15
— 0.05 —
— 0.05 —
— 0.05 —
0 0.05 — 0.05
0 0.05 — 0.05
0 0.05 — 0.05
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVin = 0 or VDD
“1” Level VOH
5.0 4.95 — 4.95
10 9.95 — 9.95
15 14.95 — 14.95
5.0
10
15
— 4.95 —
— 9.95 —
— 14.95 —
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Voltage
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 4.5 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 9.0 Vdc)
(VO = 13.5 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 0.5 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 1.0 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 1.5 Vdc)
Output Drive Current
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 2.5 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 4.6 Vdc)
(VOH = 9.5 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 13.5 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOL = 0.4 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOL = 0.5 Vdc)
(VOL = 1.5 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Current
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Capacitance
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(Vin = 0)
“0” Level
VIL
“1” Level
IIH
Source
IOH
Sink
IOL
Iin
Cin
5.0 — 1.0 —
10 — 2.0 —
15 — 2.5 —
2.25 1.0 — 1.0
4.50 2.0 — 2.0
6.75 2.5 — 2.5
5.0 4.0 — 4.0 2.75
10 8.0 — 8.0 5.50
15 12.5 — 12.5 8.25
— 4.0 —
— 8.0 —
— 12.5 —
5.0 – 1.2 —
5.0 – 0.25 —
10 – 0.62 —
15 – 1.8 —
– 1.0
– 0.2
– 0.5
– 1.5
– 1.7
– 0.36
– 0.9
– 3.5
— – 0.7 —
— – 0.14 —
— – 0.35 —
— – 1.1 —
5.0 0.64 — 0.51 0.88
10 1.6 — 1.3 2.25
15 4.2 — 3.4
8.8
— 0.36 —
— 0.9 —
— 2.4 —
15 — ± 0.1 — ± 0.00001 ± 0.1 — ± 1.0
— —— —
5.0 7.5 — —
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎQuiescent Current
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(Per Package)
IDD 5.0 — 0.25 — 0.0005 0.25 — 7.5
10 — 0.5 — 0.0010 0.5 — 15
15 — 1.0 — 0.0015 1.0 — 30
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTotal Supply Current (4.)(5.)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(Dynamic plus Quiescent,
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPer GateCL=50pF)
IT 5.0
10
15
IT = (0.3 µA/kHz) f + IDD/N
IT = (0.6 µA/kHz) f + IDD/N
IT = (0.8 µA/kHz) f + IDD/N
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ3. Data labelled “Typ” is not to be used for design purposes but is intended as an indication of the IC’s potential performance.
Unit
Vdc
Vdc
Vdc
Vdc
mAdc
mAdc
µAdc
pF
µAdc
µAdc
4. The formulas given are for the typical characteristics only at 25_C.
5. To calculate total supply current at loads other than 50 pF:
IT(CL) = IT(50 pF) + (CL – 50) Vfk
where: IT is in µH (per package), CL in pF, V = (VDD – VSS) in volts, f in kHz is input frequency, and k = 0.001 x the number of exercised gates
per package.
http://onsemi.com
3


3Pages


MC14011UBCP 電子部品, 半導体
14
1
N
–T–
SEATING
PLANE
H
A
F
G
MC14001UB, MC14011UB
PACKAGE DIMENSIONS
P SUFFIX
PLASTIC DIP PACKAGE
CASE 646–06
ISSUE M
8
B
7
C
K
D 14 PL
0.13 (0.005) M
J
L
M
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEADS WHEN
FORMED PARALLEL.
4. DIMENSION B DOES NOT INCLUDE MOLD FLASH.
5. ROUNDED CORNERS OPTIONAL.
INCHES
MILLIMETERS
DIM MIN MAX MIN MAX
A 0.715 0.770 18.16 18.80
B 0.240 0.260 6.10 6.60
C 0.145 0.185 3.69 4.69
D 0.015 0.021 0.38 0.53
F 0.040 0.070 1.02 1.78
G 0.100 BSC
2.54 BSC
H 0.052 0.095 1.32 2.41
J 0.008 0.015 0.20 0.38
K 0.115 0.135 2.92 3.43
L 0.290 0.310 7.37 7.87
M ––– 10_ ––– 10_
N 0.015 0.039 0.38 1.01
http://onsemi.com
6

6 Page



ページ 合計 : 8 ページ
 
PDF
ダウンロード
[ MC14011UBCP データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
MC14011UBCL

UB-Suffix Series COMS Gates

Motorola Semiconductors
Motorola Semiconductors
MC14011UBCP

UB-Suffix Series CMOS Gates

ON Semiconductor
ON Semiconductor
MC14011UBCP

UB-Suffix Series COMS Gates

Motorola Semiconductors
Motorola Semiconductors


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap