|
|
LC01-6TDのメーカーはSemtechです、この部品の機能は「Low Capacitance TVS for High-Speed Telecommunication Systems」です。 |
部品番号 | LC01-6TD |
| |
部品説明 | Low Capacitance TVS for High-Speed Telecommunication Systems | ||
メーカ | Semtech | ||
ロゴ | |||
このページの下部にプレビューとLC01-6TDダウンロード(pdfファイル)リンクがあります。 Total 7 pages
LC01-6
Low Capacitance TVS for High-Speed
Telecommunication Systems
PROTECTION PRODUCTS
Description
The LC01-6 transient voltage suppressor is designed to
protect components which are connected to high
speed telecommunication lines from voltage surges
caused by lightning, electrostatic discharge (ESD), and
electrical fast transients (EFT).
TVS diodes are ideal for use as board level protection
of sensitive semiconductor components. The LC01-6
is designed for metallic mode, secondary line side
protection in digital line card applications. It features
solid-state silicon-avalanche technology for unmatched
transient protection without device degradation. The
LC01-6 combines TVS diodes with low capacitance
compensation diodes to provide an integrated, low
capacitance protection solution. Additional features
include sub-nanosecond response time, a low operat-
ing voltage of 6 volts, and low clamping voltage.
The LC01-6 is suitable for use on T1/E1 and xDSL
interfaces in equipment such as base stations, routers,
and channel service units. The LC01-6 meets the long-
haul (outer-building) transient immunity requirements
of Bellcore 1089, FCC Part 68 (Type A and B surges),
and IEC 61000-4-5.
Features
u 1500 watts peak pulse power (tp = 10/1000µs)
u Transient protection for high speed data lines to
IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact)
IEC 61000-4-5 (Lightning) 95A (8/20µs)
Bellcore 1089 (Outer-Building),
100A (10/1000µs), 500A (2/10µs)
FCC Part 68 200A (10/160µs)
ITU K.20 200A (5/310µs)
u Differential protection for one Tip & Ring line pair
u Low capacitance for high speed interfaces
u Low operating & clamping voltage
u Integrated structure saves board space and
increases reliability
u Solid-state silicon-avalanche technology
Mechanical Characteristics
u JEDEC SO-16W package
u UL 497B listed
u Molding compound flammability rating: UL 94V-0
u Marking : Part number, date code, logo
u Packaging : Tube or Tape and Reel per EIA 481
Applications
u T1/E1 Line Cards
u Base Stations
u WAN Interfaces
u xDSL Interfaces
u CSU/DSU Equipment
Circuit Diagram
Schematic & PIN Configuration
Revision 9/2000
SO-16W (Top View)
1 www.semtech.com
1 Page PROTECTION PRODUCTS
Typical Characteristics
Non-Repetitive Peak Pulse Power vs. Pulse Time
100
10
1
0.1
1 10 100
Pulse Duration - tp (µs)
1000
110
100
90
80
70
60
50
40
30
20
10
0
0
Pulse Waveform
e-t
td = IPP/2
Waveform
Parameters:
tr = 10µs
td = 1000µs
10 1000
Time (µs)
3000
Capacitance vs. Reverse Voltage
41.5
41
40.5
Pins 1-8 tied together
Pins 9 - 16 tied together
f = 1MHz
40
39.5
39
38.5
0123456
Reverse Voltage (V)
LC01-6
Power Derating Curve
110
100
90
80
70
60
50
40
30
20
10
0
0
25 50 75 100 125 150 175
Ambient Temperature - TA (oC)
Clamping Voltage vs. Peak Pulse Current
14
12
10
8
6
4 Waveform
Parameters:
2 tr = 10µs
td = 1000µs
0
0 10 20 30 40 50 60 70 80 90 100 110
Peak Pulse Current - IPP (A)
AC Power Dissipation
6
5
4
3
2
1
0
1 10 100
Time (Seconds)
1000
ã 2000 Semtech Corp.
3
www.semtech.com
3Pages PROTECTION PRODUCTS
Outline Drawing - SO-16W
LC01-6
Land Pattern - SO-16W
ã 2000 Semtech Corp.
6
www.semtech.com
6 Page | |||
ページ | 合計 : 7 ページ | ||
|
PDF ダウンロード | [ LC01-6TD データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
LC01-6TD | Low Capacitance TVS for High-Speed Telecommunication Systems | Semtech |