DataSheet.jp

TEA1114A の電気的特性と機能

TEA1114AのメーカーはNXP Semiconductorsです、この部品の機能は「Low voltage telephone transmission circuit with dialler interface and regulated strong supply」です。


製品の詳細 ( Datasheet PDF )

部品番号 TEA1114A
部品説明 Low voltage telephone transmission circuit with dialler interface and regulated strong supply
メーカ NXP Semiconductors
ロゴ NXP Semiconductors ロゴ 




このページの下部にプレビューとTEA1114Aダウンロード(pdfファイル)リンクがあります。

Total 28 pages

No Preview Available !

TEA1114A Datasheet, TEA1114A PDF,ピン配置, 機能
INTEGRATED CIRCUITS
DATA SHEET
TEA1114A
Low voltage telephone
transmission circuit with dialler
interface and regulated strong
supply
Product specification
Supersedes data of 1999 Sep 14
File under Integrated Circuits, IC03
2000 Mar 21

1 Page





TEA1114A pdf, ピン配列
Philips Semiconductors
Low voltage telephone transmission circuit with
dialler interface and regulated strong supply
Product specification
TEA1114A
QUICK REFERENCE DATA
Iline = 15 mA; VEE = 0 V; RSLPE = 20 ; AGC pin connected to VEE; Zline = 600 ; f = 1 kHz; measured according to test
circuits given in Figs 15, 16 and 17; Tamb = 25 °C for TEA1114A(T); Tj = 25 °C for TEA1114AUH; unless otherwise
specified.
SYMBOL
Iline
VLN
ICC
VCC
VDD
IDD
Gv(TX)
Gv(RX)
Gv(QR)
Gv(trx)
Gv(trx)(m)
PARAMETER
CONDITIONS
line current operating range
normal operation
with reduced performance
DC line voltage
internal current consumption
supply voltage for internal circuitry
(unregulated)
VCC = 3.6 V
IP = 0 mA
regulated supply voltage for peripherals
speech mode
ringer mode
available supply current for peripherals
IDD = 3 mA
IDD = 75 mA
typical voltage gain for microphone
amplifier
VMIC = 4 mV (RMS)
typical voltage gain for receiving amplifier
gain setting range for earpiece amplifier
gain control range for microphone and
receive amplifiers with respect to
Iline = 15 mA
gain reduction for microphone and receive
amplifiers
VIR = 4 mV (RMS)
RE1 = 100 k
Iline = 85 mA
MUTE = LOW
MIN.
11
1
4.05
3.0
3.0
43.2
32.4
14
TYP.
4.35
1.25
3.6
3.3
3.3
44.2
33.4
6.0
80
MAX. UNIT
140 mA
11 mA
4.65 V
1.5 mA
V
3.6 V
3.6 V
3 mA
45.2 dB
34.4 dB
+12 dB
dB
dB
2000 Mar 21
3


3Pages


TEA1114A 電子部品, 半導体
Philips Semiconductors
Low voltage telephone transmission circuit with
dialler interface and regulated strong supply
Product specification
TEA1114A
FUNCTIONAL DESCRIPTION
All data given in this chapter are typical values, except
when otherwise specified.
Supply (pins LN, SLPE, REG, VCC and VDD)
The supply for the TEA1114A and its peripherals is
obtained from the telephone line (see Fig.3).
THE LINE INTERFACE (PINS LN, SLPE AND REG)
The IC generates a stabilized reference voltage (Vref)
between pins LN and SLPE. Vref is temperature
compensated and can be adjusted by means of an
external resistor (RVA). Vref equals 4.15 V and can be
increased by connecting RVA between pins REG and
SLPE or decreased by connecting RVA between pins
REG and LN. The voltage at pin REG is used by the
internal regulator to generate Vref and is decoupled by
CREG, which is connected to VEE. This capacitor,
converted into an equivalent inductance
(see Section “Set impedance”) realizes the set impedance
conversion from its DC value (RSLPE) to its AC value
(RCC in the audio-frequency range). The voltage at
pin SLPE is proportional to the line current.
The voltage at pin LN is:
VLN = Vref + RSLPE × ISLPE
ISLPE = Iline ICC IP ISUP
where:
Iline = line current
ICC = current consumption of the IC
IP = supply current for external circuits
ISUP = current consumed between LN and VEE by the
VDD regulator.
The preferred value for RSLPE is 20 . Changing RSLPE will
affect more than the DC characteristics; it also influences
the microphone and DTMF gains, the gain control
characteristics, the sidetone level and the maximum
output swing on the line.
The DC line current flowing into the set is determined by
the exchange supply voltage (VEXCH), the feeding bridge
resistance (REXCH), the DC resistance of the telephone
line (Rline) and the reference voltage (Vref). With line
currents below 9 mA, the internal reference voltage
(generating Vref) is automatically adjusted to a lower value.
This means that more sets can operate in parallel with
DC line voltages (excluding the polarity guard) down to an
absolute minimum voltage of 1.45 V. At currents below
9 mA, the circuit has limited sending and receiving levels.
This is called the low voltage area.
handbook, full pagewidth Rline
Iline
REXCH
TEA1114A
from preamplifier
RCC
ILN
ICC
LN VCC
ISUP
VDD
REGULATOR
internal
circuitry
VDD
IDD
CVCC
100 µF
IP
external
circuits
VEXCH
REG
CREG
4.7 µF
SLPE
ISLPE
RSLPE
20
VEE
Fig.3 Supply configuration.
peripherals
CVDD
220 µF
MGK805
2000 Mar 21
6

6 Page



ページ 合計 : 28 ページ
 
PDF
ダウンロード
[ TEA1114A データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
TEA1114A

Low voltage telephone transmission circuit with dialler interface and regulated strong supply

NXP Semiconductors
NXP Semiconductors
TEA1114AT

Low voltage telephone transmission circuit with dialler interface and regulated strong supply

NXP Semiconductors
NXP Semiconductors
TEA1114AUH

Low voltage telephone transmission circuit with dialler interface and regulated strong supply

NXP Semiconductors
NXP Semiconductors


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap