DataSheet.jp

TLP1037A の電気的特性と機能

TLP1037AのメーカーはToshiba Semiconductorです、この部品の機能は「DOMESTIC ELECTRICAL APPLIANCES SUCH AS VTRS AND CD PLAYERS」です。


製品の詳細 ( Datasheet PDF )

部品番号 TLP1037A
部品説明 DOMESTIC ELECTRICAL APPLIANCES SUCH AS VTRS AND CD PLAYERS
メーカ Toshiba Semiconductor
ロゴ Toshiba Semiconductor ロゴ 




このページの下部にプレビューとTLP1037Aダウンロード(pdfファイル)リンクがあります。
Total 7 pages

No Preview Available !

TLP1037A Datasheet, TLP1037A PDF,ピン配置, 機能
TOSHIBA Photointerrupter Infrared LED + Photo IC
TLP1037A
Domestic electrical appliances such as VTRs and
CD players
Office equipment such as photocopiers, printers
and fax machines
Vending machines, bank ATMs and automatic
ticket machines
Position detectors
TLP1037A
The TLP1037A is a high-withstanding-voltage
photo-interrupter for digital output. The device combines a
high-optical-output GaAs infrared LED with a high-sensitivity,
high-gain Si photo-IC. The photo-IC, which supports a wide
range of systems (3.3 V to 12 V), enables the device to consume
less power than conventional devices. The device also features
a narrow slit width and high resolution.
The device is housed in a deep-slot package.
· Deep-slot package (detection slot depth: 12 mm)
· Designed for direct mounting on printed circuit boards
(positioning pins included)
TOSHIBA
· Gap: 5 mm
Weight: 1 g (typ.)
· Resolution: slit width 0.5 mm
· Digital output (open-collector, high-level output when no light is present)
· Direct connection to logic IC
· Power supply voltage: VCC = 2.7 V~15 V
· Switching time: tpLH = 15 µs (max)
· Detector impermeable to visible light
· Package material: Polybutylene-terephthalate (UL94V-0, black)
Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Forward current
Forward current derating
(Ta > 25°C)
(Ta > 85°C)
Reverse voltage
Supply voltage
Output voltage
Low-level output current (Ta = Topr)
Operating temperature
Storage temperature
Soldering temperature (5 s)
(Note 1)
IF
DIF/°C
VR
VCC
VO
IOL
Topr
Tstg
Tsol
50
-0.33
-2
5
15
15
16
-30~95
-40~100
260
Note 1: Soldering is performed 1.5 mm from the bottom of the package.
Unit
mA
mA/°C
V
V
V
mA
°C
°C
°C
1 2002-09-20

1 Page





TLP1037A pdf, ピン配列
Markings
TLP1037A
Monthly lot number
Month of manufacture (January to December denoted by letters A to L respectively)
Year of manufacture (Last digit of year of manufacture)
Precautions
· When removing flux with chemicals after soldering, clean only the soldered part of the leads. Do not immerse
the entire package in the cleaning solvent. Chemical residue on the LED emitter or the photodetector inside the
photo-IC case may adversely affect the optical characteristics of the device and may drastically reduce the
threshold input current.
· The case is made of polybutylene-terephthalate. Oil or chemicals may cause the package to melt or crack. Care
must be taken in relation to the environment in which the device is to be installed.
· Mount the device on a level surface.
· Output fluctuates for 100 ms after power-on while the internal circuit stabilizes.
· To stabilize the power line, insert a bypass capacitor of up to 0.01 mF between VCC and GND, close to the device.
· The threshold input current increases over time due to current flowing in the infrared LED. The design of
circuits which incorporate the device must take into account the change in threshold input current over time.
The change in threshold input current is equal to the reciprocal of the change in LED infrared optical output.
IFHL (t )
IFHL (0)
=
ççèæ
PO (t )
PO (0)
÷÷øö-1
· Choose a high-quality shutter material which is impermeable to light. If the material is of inferior quality, light
from the LED may pass through the shutter, causing the device to malfunction.
3 2002-09-20


3Pages


TLP1037A 電子部品, 半導体
Detection position (1) (typ.)
1.2
1.0
0.8
0.6
0.4
0.2
0
-0.4
-0.2
Ta = 25°C
VCC = 3.3 V
RL = 10 kW
IF = 20 mA
-0
d
+
Shutter
Detection position
d = 0 ± 0.3 mm
0 0.2 0.4 0.6
Distance d (mm)
0.8
TLP1037A
Detection position (2) (typ.)
1.2
1.0
Ta = 25°C
VCC = 3.3 V
0.8 RL = 10 kW
IF = 20 mA
Shutter
0.6
0.4 d
0.2 Detection position
d
=
12
+1.5
-1.1
mm
0
11.0 11.2 11.4 11.6 11.8 12.0 12.2
Distance d (mm)
Relative Positioning of Shutter and Device
For normal operation, position the shutter and the device as shown in the figure below. By considering the
device’s detection direction characteristic and switching time, determine the shutter slit width and pitch.
Shutter
A
A’
Unit: mm
Center of sensor
Cross section between A and A’
6 2002-09-20

6 Page



ページ 合計 : 7 ページ
 
PDF
ダウンロード
[ TLP1037A データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
TLP1037A

DOMESTIC ELECTRICAL APPLIANCES SUCH AS VTRS AND CD PLAYERS

Toshiba Semiconductor
Toshiba Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap