DataSheet.jp

V23826-H18-C63 の電気的特性と機能

V23826-H18-C63のメーカーはInfineon Technologiesです、この部品の機能は「DC/DC (5 V/3.3 V) Single Mode 622 MBd ATM/SDH/SONET 1x9 Transceiver」です。


製品の詳細 ( Datasheet PDF )

部品番号 V23826-H18-C63
部品説明 DC/DC (5 V/3.3 V) Single Mode 622 MBd ATM/SDH/SONET 1x9 Transceiver
メーカ Infineon Technologies
ロゴ Infineon Technologies ロゴ 




このページの下部にプレビューとV23826-H18-C63ダウンロード(pdfファイル)リンクがあります。

Total 14 pages

No Preview Available !

V23826-H18-C63 Datasheet, V23826-H18-C63 PDF,ピン配置, 機能
DC/DC (5 V/3.3 V) Single Mode 622 MBd
ATM/SDH/SONET 1x9 Transceiver
Fiber Optics
V23826-H18-C63
V23826-H18-C363
Features
• Compliant with ATM, SONET OC-3, SDH STM-1 and
SONET OC-12, SDH STM-4
• Meets mezzanine standard height of 9.8 mm
• Compact integrated transceiver unit with
– MQW laser diode transmitter
– InGaAs PIN photodiode receiver
– Duplex SC receptacle
• Class 1 FDA and IEC laser safety compliant
• FDA Accession No. 9520890-12, 9520890-13
• Single power supply (5 V or 3.3 V)
• Signal detect indicator
• PECL differential inputs and outputs
• Process plug included
• Input Signal Monitor
• Wave solderable and washable with process plug inserted
• Industry standard multisource 1x9 footprint
• For distances of up to 15 km on single mode fiber
V23826-H18-C363
Part Number
V23826-H18-C63 1)
V23826-H18-C363 1)
Add suffix to PIN
-C3
-D3
1) Standard version
Voltage
Signal Detect
Input
5 V PECL
DC
3.3 V
Shield options
Metallized cover, forward springs
Metallized cover, backward springs
Data Sheet
1
Output
DC
2001-08-01

1 Page





V23826-H18-C63 pdf, ピン配列
V23826-H18-C63
V23826-H18-C363
Description
Description
The Infineon single mode ATM transceiver complies with the ATM Forum’s Network
Compatible ATM for Local Network Applications document and ANSI’s Broadband
ISDN - Customer Installation Interfaces, Physical Media Dependent Specification,
T1.646-1995, Bellcore - SONET OC-3 / IR-1 and OC-12 / IR-1, ITU-T G.957 STM-1 /
S.1.1 and STM-4 / S.4.1. ATM was developed to facilitate solutions in multimedia
applications and real time transmission. The data rate is scalable, and the ATM protocol
is the basis of the broadband public networks being standardized in the International
Telecommunications Union (ITU), the former International Telegraph and Telephone
Consultative Committee (CCITT). ATM can also be used in local private applications.
The Infineon single mode ATM transceiver is a single unit comprised of a transmitter, a
receiver, and an SC receptacle. This design frees the customer from many alignment
and PC board layout concerns. The module is designed for low cost WAN applications.
It can be used as the network end device interface in workstations, servers, and storage
devices, and in a broad range of network devices such as bridges, routers, and intelligent
hubs, as well as wide area ATM switches.
This transceiver operates at 622.080 Mbit/s from a single power supply (+5 V or 3.3 V).
The differential data inputs and outputs are PECL compatible.
Functional Description
This transceiver is designed to transmit serial data via single mode cable.
Signal Monitor and
Automatic Shut-Down
LEN
Laser Coupling Unit
TD Laser ISM*
TD Driver
e/o
Laser
Power
Control
Monitor
RD
RD Receiver
SD
o/e
Single Mode Fiber
RX Coupling Unit
o/e
*DC/DC Version only
Figure 2 Functional Diagram
Data Sheet 3 2001-08-01


3Pages


V23826-H18-C63 電子部品, 半導体
V23826-H18-C63
V23826-H18-C363
Technical Data
Recommended Operating Conditions
Parameter
Symbol
Limit Values
Unit
min.
typ.
max.
Ambient Temperature
Power Supply Voltage
3.3 V
5V
TAMB
0
VCC VEE 3.1
4.75
3.3
5
70 °C
3.5 V
5.25
Supply Current1)
3.3 V ICC
5V
160 230 mA
180 270
Transmitter
Data Input High Voltage DC/DC
Data Input Low Voltage DC/DC
Input Data Rise/Fall Time
10%–90%
VIH VCC
VIL VCC
tR, tF
–1165
–1810
100
–880
–1475
1300
mV
ps
Receiver
Input Center Wavelength
λC
1270
1356
nm
1) For VCC VEE (min., max.) 50% duty cycle. The supply current does not include the load drive current of the
receiver output.
The electro-optical characteristics described in the following tables are only valid for use
under the recommended operating conditions.
Transmitter Electro-Optical Characteristics
Parameter
Symbol
Limit Values
Unit
Launched Power (Average)1)
Center Wavelength
Spectral Width (RMS)
Relative Intensity Noise
PO
λC
σl
RIN
min.
–15
1274
typ.
–11
max.
–8
1356
2.5
–120
dBm
nm
dB/Hz
Extinction Ratio (Dynamic)
ER
8.2
Reset Threshold2)
3.3 V VTH
5V
2.7
3.5
Reset Time Out2)
Eye Diagram3)
tRES
15
22
35
ED
dB
V
ms
1) Into single mode fiber, 9 µm diameter.
2) Laser power is shut down if power supply is below VTH and switched on if power supply is above VTH after tRES.
3) Transmitter meets ANSI T1E1.2, SONET OC-3 and OC-12, and ITU-T G.957 mask patterns.
Data Sheet 6 2001-08-01

6 Page



ページ 合計 : 14 ページ
 
PDF
ダウンロード
[ V23826-H18-C63 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
V23826-H18-C63

DC/DC (5 V/3.3 V) Single Mode 622 MBd ATM/SDH/SONET 1x9 Transceiver

Infineon Technologies
Infineon Technologies


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap