|
|
PDF SG29085A Data sheet ( Hoja de datos )
| Número de pieza | SG29085A | |
| Descripción | LOW DROPOUT DUAL REGULATOR | |
| Fabricantes | Microsemi Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SG29085A (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
SG29085/85A
LOW DROPOUT DUAL REGULATOR
DESCRIPTION
FEATURES
The SG29085/85A is a dual 8.2V/5V positive voltage regulator. One output is a high
current (up to 1000 mA) regulator that can be turned on or off by a high impedance low
current TTL compatible switch. The second or standby output remains on regardless.
The on/off switch not only shuts off the high current output but actually puts the IC in a
micropower mode making possible a low quiescent current. This unique characteristic
coupled with an extremely low dropout, (.55V for output current of 10mA) makes the
SG29085/85A well suited for power systems that require standby memory. The
SG29085/85A includes other features which were originally designed for automotive
applications. These include protection from reverse battery installations and double
battery jumps. The high current regulator has overvoltage shutdown to protect both the
internal circuitry and the load during line transients, such as load dump (60V). In addition,
the high current regulator design also has built-in protection for short circuit and thermal
overload. During these fault conditions of the primary regulator the standby regulator will
continue to power its load.
The SG29085 is the 8.2 volt, ±5% version of a family of dual regulators with a standby
output voltage of 5V. Other high current outputs of 5 and 12 volts are available. Also
available is the SG28085A which offers an improved output voltage tolerance of ±2%.
They are available in the plastic TO-220 power package and are designed to function
over the automotive ambient temperature range of -40°C to 85°C.
• 2% Internally Trimmed Output
• Two regulated outputs
• Output current in excess of
1000mA
• Low quiescent current standby
regulator
• Input-output differential less than
0.6V at 0.5A
• Reverse battery protection
• 60V load dump protection
• -50V reverse transient protection
• Short circuit protection
• Internal thermal overload protec-
tion
• Available in plastic TO-220
• ON/OFF switch for high current
output
TYPICAL APPLICATION CIRCUIT
INPUT VOLTAGE
C1*
0.1µF
1
SG29085/85A
OVERVOLTAGE
THERMAL
SHUTDOWN
* Required if regulator is located far from power
supply filter.
** Required for stability. May be increased without
bound. Capacitor must be rated to operate at the
minimum temperature expected for the regulator
system.
2 OUTPUT VOLTAGE
(8.2V, 1000mA)
C2 **
10 µF
ON/OFF SWITCH
(for output voltage only)
4
REGULATOR
BIAS
1.23V
REFERENCE
5V STANDBY
REGULATOR
3
5.6V
5
STANDBY OUTPUT
(5V, 50mA)
C3 **
10 µF
12/90 Rev 1.1 2/94
Copyright © 1994
GROUND
1
LINFINITY Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞ FAX: (714) 893-2570
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet SG29085A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SG29085 | LOW DROPOUT DUAL REGULATOR | Microsemi Corporation |
| SG29085A | LOW DROPOUT DUAL REGULATOR | Microsemi Corporation |
| SG29085AP | LOW DROPOUT DUAL REGULATOR | Microsemi Corporation |
| SG29085P | LOW DROPOUT DUAL REGULATOR | Microsemi Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |