|
|
PDF 541 Data sheet ( Hoja de datos )
| Número de pieza | 541 | |
| Descripción | HIGH POWER OP-AMP | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 541 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
M.S KENNEDY CORP.
ISO 9001 CERTIFIED BY DSCC
HHIIGGHHPPOOWWEERR
541
OOPP--AAMMPP
SERIES
4707 Dey Road Liverpool, N.Y. 13088
(315) 701-6751
MIL-PRF-38534 QUALIFIED
FEATURES:
Available as SMD #5962-8870101
High Output Current - 10 Amps Peak
Wide Power Supply Range - ±10V to ±40V
Programmable Current Limit
FET Input
Isolated Case
Replacement for OMA 541SKB - MSK 541
OMA 541SDB - MSK 146
OMA 541SZB - MSK 147
MSK145
MSK146
DESCRIPTION:
MSK147
MSK541
The MSK 541 Series is a high power monolithic amplifier ideally suited for high power amplification and magnetic
deflection applications. This amplifier is capable of operation at a supply voltage rating of 80 volts and can deliver
guaranteed continuous output currents up to 5A, making the 541 series an excellent low cost choice for motor drive
circuits. The amplifier and load can be protected from fault conditions through the use of internal current limit
circuitry that can be user programmed with a single external resistor. The MSK 541 is pin compatible with popular
op-amps such as the Burr-Brown OPA501, OPA511, OPA512, OPA541 and 3573. The MSK 541 is available in a
hermetically sealed 8 pin TO-3 package. Other package styles are also available for a wide range of applications.
The MSK 145 is available in a 6 pin SIP Package. The MSK 146 is an 8 pin Power DIP Package and the MSK 147
is available in an 8 pin Power Z-TAB Package for applications requiring bolt down heat sinking.
EQUIVALENT SCHEMATIC
MSK 541 ONLY
TYPICAL APPLICATIONS
Servo Amplifer
Motor Driver
Audio Amplifier
Programmable Power Supply
PIN-OUT INFORMATION
1 Current Sense
5 Inverting Input
2 No Connection
6 Negative Power Supply
3 Positive Power Supply 7 No Connection
4 Non-Inverting Input
8 Output Drive
The above pin out table is for the MSK 541 (TO-3). Refer to the
mechanical specifications page for the pin out information of addi-
tional package styles.
1 Rev. C 3/01
1 page  
TYPICAL PERFORMANCE CURVES
5 Rev. C 3/01
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet 541.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 540-99-020-17-400 | Sockets for Plastic Leaded Chip Carriers (PLCC) SMT terminations |  Precid-Dip Durtal SA |
| 540-99-020-17-400-2 | Sockets for Plastic Leaded Chip Carriers (PLCC) SMT terminations | Precid-Dip Durtal SA |
| 540-99-020-24-000-1 | Sockets for Plastic Leaded Chip Carriers (PLCC) Solder tail | Precid-Dip Durtal SA |
| 540-99-028-17-400 | Sockets for Plastic Leaded Chip Carriers (PLCC) SMT terminations | Precid-Dip Durtal SA |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |