DataSheet.jp

F0500T の電気的特性と機能

F0500TのメーカーはTeccor Electronicsです、この部品の機能は「solid state crowbar devices」です。


製品の詳細 ( Datasheet PDF )

部品番号 F0500T
部品説明 solid state crowbar devices
メーカ Teccor Electronics
ロゴ Teccor Electronics ロゴ 




このページの下部にプレビューとF0500Tダウンロード(pdfファイル)リンクがあります。

Total 30 pages

No Preview Available !

F0500T Datasheet, F0500T PDF,ピン配置, 機能
Data Book
and Design Guide
TECCOR ELECTRONICS
1800 Hurd Drive
Irving, Texas 75038
United States of America
Phone: +1 972-580-7777
Fax: +1 972-550-1309
Web site: http://www.teccor.com
An Invensys company

1 Page





F0500T pdf, ピン配列
Teccor Electronics is the proprietor of the SIDACtor®, Battrax®, and TeleLink®
trademarks. All other brand names may be trademarks of their respective companies.
Teccor Electronics SIDACtor products are covered by these and other U.S. Patents:
4,685,120
4,827,497
4,905,119
5,479,031
5,516,705
All SIDACtor products are recognized and listed under UL file E133083 as a UL 497B
compliant device. All TeleLink fuses are recognized under UL file E191008 and are also
listed for CSA marking by certificate LR 702828.
ISO 9001
TECCOR ELECTRONICS
Teccor Electronics reserves the right to make changes at any time in order to improve
designs and to supply the best products possible. The information in this catalog has
been carefully checked and is believed to be accurate and reliable; however, no liability
of any type shall be incurred by Teccor for the use of the circuits or devices described in
this publication. Furthermore, no license of any patent rights is implied or given to any
purchaser.


3Pages


F0500T 電子部品, 半導体
Product Description
Product Description
SIDACtor components are solid state crowbar devices designed to protect telecom
equipment during hazardous transient conditions. Capitalizing on the latest in thyristor
advancements, Teccor makes SIDACtor devices with a patented ion implant technology.
This technology ensures effective protection within nanoseconds, up to 5000 A surge
current ratings, and simple solutions for regulatory requirements such as GR 1089,
TIA-968 (formerly known as FCC Part 68), ITU-T K.20, ITU-T K.21, and UL 60950.
Operation
In the standby mode, SIDACtor devices exhibit a high off-state impedance, eliminating
excessive leakage currents and appearing transparent to the circuits they protect. Upon
application of a voltage exceeding the switching voltage (VS), SIDACtor devices crowbar
and simulate a short circuit condition until the current flowing through the device is either
interrupted or drops below the SIDACtor device’s holding current (IH). Once this occurs,
SIDACtor devices reset and return to their high off-state impedance.
+I
IT
IS
IH
IDRM
-V
+V
VT VDRM
VS
V-I Characteristics
-I
Advantages
Compared to surge suppression using other technologies, SIDACtor devices offer absolute
surge protection regardless of the surge current available and the rate of applied voltage
(dv/dt). SIDACtor devices:
• Cannot be damaged by voltage
• Eliminate hysteresis and heat dissipation typically found with clamping devices
• Eliminate voltage overshoot caused by fast-rising transients
• Are non-degenerative
• Will not fatigue
• Have low capacitance, making them ideal for high-speed transmission equipment
http://www.teccor.com
+1 972-580-7777
1-2
© 2002 Teccor Electronics
SIDACtor® Data Book and Design Guide

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ F0500T データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
F0500T

solid state crowbar devices

Teccor Electronics
Teccor Electronics


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap