|
|
Número de pieza | M-FIAM5HN3 | |
Descripción | Military 28Vin Filter Input Attenuator Module | |
Fabricantes | Vicor Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de M-FIAM5HN3 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! 45
Features
• EMI filtering-MIL-STD-461E
• Transient protection-MIL-STD-704E 1
• Environments-MIL-STD-810, MIL-STD-202
• Environmental stress screening
• Low profile mounting options
• Output current up to 20 Amps
• Mini sized package
• Inrush current limiting
• Reverse polarity protection
M-FIAM5
Military 28Vin Filter
Input Attenuator Module
Shown actual size:
2.28 x 2.2 x 0.5 in
57,9 x 55,9 x 12,7 mm
Product Highlights
The M-FIAM5 is a DC front-end module
that provides EMI filtering and transient
protection required in military applications.
The M-FIAM5 enables designers using
Vicor 2nd Generation 24V DC-DC converters
to meet conducted emission/conducted
susceptibility per MIL-STD-461E; and
input transients per MIL-STD-704E1. The
M-FIAM5 accepts an input voltage of
18-36Vdc and delivers output current
up to 20 Amps.
Absolute Maximum Rating
Parameter
+In to –In
+In to –In
Mounting torque
Pin Soldering temperature
Pin Soldering temperature
Operating temperature H–Grade
Storage temperature H–Grade
Operating temperature M–Grade
Storage temperature M–Grade
Rating
36
50
5(0.57)
500 (260)
750 (390)
-40 to +100
-55 to +125
-55 to +100
-65 to +125
Unit
Vdc
Vdc
in-lbs
°F(°C)
°F(°C)
°C
°C
°C
°C
Notes
Continuous
100ms
6 each, #4-40 or M3
<5 sec; wave solder
<7 sec; hand solder
Baseplate
Baseplate
M-FIAM5 is housed in an industry
standard "half brick" module measuring
2.28" x 2.2" x 0.5" and depending upon
model selected, may be mounted on-board
or in-board for height critical applications.
Compatible Products
• 2nd Generation 24V Input
DC-DC converters
Part Number Format
M-FIAM5 M 2 1
Product
Product Grade(°C)
H = –40 to +100
M = –55 to +100
Pin Style
1 = Short
2 = Long
*S=Short ModuMate
*N=Long ModuMate
Baseplate
1 = Slotted
2 = Threaded
3 = Thru-hole
*Compatible with SurfMate and InMate socketing system.
Thermal Resistance
Specifications
(typical at TBP = 25ºC, nominal line, 75% load, unless otherwise specified)
Parameter
Min Typ Max
Input voltage
18Vdc
28Vdc 36Vdc
Output current
20A
Inrush limiting
0.007A/µF
Transient immunity
MIL-STD-704E
EMI:MIL-STD-461E
Conducted emissions: CE101, CE102
Conducted susceptibility: CS101, CS114, CS115, CS116
Dielectric withstand
1,500Vrms
2,121Vdc
Efficiency
96% 98%
Internal voltage drop
0.5 1.0
ON/OFF control
Enable (ON)
0.0Vdc
1.0Vdc
Disable (OFF)
3.5Vdc
5.0Vdc
External capacitance
330µF
1000µF
Weight
3.1 (88) 4 (113)
Warranty
2
Remarks
Continuous
See footnote 1
Input/Output to Base
Input/Output to Base
@20A, 100°C baseplate
Referenced to –Vout.
100kΩ internal pull-up resistor
See illustration C1 on page 3.
50V
Ounces (grams)
Years
1 MIL-STD-704E Compliance requires an external circuit. See addendum A
MTBF per MIL-HDBK-217F
Parameter
Baseplate to sink; flat, greased surface
Baseplate to sink; thermal pad (P/N 20264)
Baseplate to ambient
Baseplate to sink; 1000 LFM
Typ
0.16°C/Watt
0.1°C/Watt
7.9°C/Watt
2.2°C/Watt
Temp
25°C
50°C
65°C
Environment
Ground Benign:G.B.
Naval Sheltered:N.S.
Airborne Inhabited Cargo:A.I.C.
MTBF
3,334,295
786,893
650,187
Unit
Hrs
Hrs
Hrs
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MFIAM5
Set your site on VICOR at www.vicorpower.com
Rev. 1.7
Page 1 of 5
1 page Vicor’s comprehensive line of power solutions includes modular, high
density DC-DC converters and accessory components, configurable power
supplies, and custom power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is
assumed by Vicor for its use. No license is granted by implication or otherwise under any patent or patent
rights of Vicor. Vicor components are not designed to be used in applications, such as life support systems,
wherein a failure or malfunction could result in injury or death. All sales are subject to Vicor’s Terms and
Conditions of Sale, which are available upon request.
Specifications are subject to change without notice.
Component Solutions
for Your Power System
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
978-470-2900
Fax: 978-475-6715
Email
Vicor Express: [email protected]
Technical Support: [email protected]
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MFIAM5
Rev. 1.7
04/03/10M
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet M-FIAM5HN3.PDF ] |
Número de pieza | Descripción | Fabricantes |
M-FIAM5HN1 | Military 28Vin Filter Input Attenuator Module | Vicor Corporation |
M-FIAM5HN2 | Military 28Vin Filter Input Attenuator Module | Vicor Corporation |
M-FIAM5HN3 | Military 28Vin Filter Input Attenuator Module | Vicor Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |