DataSheet.jp

M-991-02SM の電気的特性と機能

M-991-02SMのメーカーはClare Inc.です、この部品の機能は「Call Progress Tone Generator」です。


製品の詳細 ( Datasheet PDF )

部品番号 M-991-02SM
部品説明 Call Progress Tone Generator
メーカ Clare Inc.
ロゴ Clare  Inc. ロゴ 




このページの下部にプレビューとM-991-02SMダウンロード(pdfファイル)リンクがあります。
Total 6 pages

No Preview Available !

M-991-02SM Datasheet, M-991-02SM PDF,ピン配置, 機能
Features
Generates standard call progress tones
Digital input control
Linear (analog) output
Power output capable of driving standard line
14-pin DIP and 16-pin SOIC package types
Single supply 5V CMOS (low power)
Inexpensive 3.58 MHz time base
Temperature range from -25ºC to 70ºC (-01 ver-
sion)
Temperature range from -40ºC to 85ºC (-02 ver-
sion)
Applications
Telephone systems
Test equipment
Callback
Security systems
Billing systems
M-991
Call Progress Tone Generator
Description
The M-991 is a call progress tone generator integrated
circuit for use in telephone systems. The circuit uses
low-power CMOS techniques to generate tones which
are digitally controlled and highly linear. The M-991 is
designed to permit operation with almost any system.
The use of integrated circuit techniques allows the M-
991 to incorporate the control, tone generating, and
power output buffer into a single 14-pin DIP or a 16-pin
SOIC. A 3.58-MHz (color burst) crystal-controlled time
base guarantees accuracy and repeatability.
Ordering Information
Part #
M-991
M-991-01SM
M-991-01SMTR
M-991-02SM
M-991-02SMTR
Description
14-pin plastic DIP
16-pin SOIC
16-pin SOIC Tape and Reel
16-pin SOIC, Extended
Temperature Range
16-pin SOIC, Extended
Temperature Range, Tape and
Reel
Pin Assignments
Block Diagram
DS-M991-R1
www.clare.com
1

1 Page





M-991-02SM pdf, ピン配列
M-991
Call Progress Tone Generation
Call progress tones are audible tones sent from
switching systems to calling parties (or equipment) to
indicate the status of calls. Calling parties can identify
the success of a placed call by what is heard after dial-
ing. The M-991 series utilizes a highly linear tone gen-
erator that produces the unique frequencies (singly or
in pairs) that are common to call progress signals.
Duration and frequency selection are digitally con-
trolled (see the Data/Tone Selection table below for
data settings for a particular tone output). A typical
control sequence for the M-991 is: (1) set data lines to
desired frequency selection, (2) wait for data lines to
settle, (3) drive the chip enable (CE) low, (4) maintain
CE low for desired tone duration (Note: data lines may
be changed after data hold time), and (4) return CE to
a logic high. (Commonly used call progress tones are
shown in the Data/Tone Selection table below.) In a
bus-oriented system, noise on the data lines may
propagate through the device and appear at the out-
put. To safeguard against this, use an external latch to
lock the data into the device. In addition, it is good
practice to bypass the VREF pin to ground with a small
capacitor (0.01 mF) to reduce power supply noise. The
designer should be aware of device timing require-
ments and design accordingly. The data input pins
may be tied high (+5 VDC) or low (ground) as required,
but D4 and D5 must be left open. Beware of hardwiring
the CE pin for dedicated tone generation. This input is
edge triggered. An RC network like that shown in the
Power-on Reset Circuit on Page 4 should be used to
momentarily reset the device immediately following
power-up to ensure proper operation.
Data/Tone Selection
D0 D1 D2 D3 Frequency (Hz)
Use
12
0 0 0 0 350
440 Dial Tone
0 0 0 1 400
off Special
0 0 1 0 440
off Alert Tone
0 0 1 1 440
480 Audible Ring
0 1 0 0 440
620 Pre-empt
0 1 0 1 480
off Bell high tone
0 1 1 0 480
620 Reorder(Bell low)
0 1 1 1 350
off Special
1 0 0 0 620
off Special
1 0 0 1 941
1209 DTMF “*
Standard Call Progress Tones
Pin Function
Pin
CE
D0 - D3
D4-D5
MUTE
OUTDRIVE
VDD
VREF
VSS
XIN
XOUT
Function
Latches data and enables output (active
low input).
Data input pins. (See Data/Tone Selection.)
Leave open.
Output indicates that a signal is being generated at
OUTDRIVE.
Linear buffered tone output.
Most positive power supply input pin.
Internally generated mid-power supply voltage
(output).
Most negative power supply input pin.
Crystal oscillator or digital clock input.
Crystal oscillator output.
Tone Name
Dial
Reorder
Busy
Audible Ring
Recall Dial
Special AR
Intercept
Call Waiting
Busy Verification
Executive Override
Confirmation
Frequency (Hz)
12
350 440
480 620
480 620
440 480
350 440
440 480
440 620
440 Off
440 Off
440 Off
350 440
Interruption Rate
Steady
Repeat, tones on and off 250 ms ± 25 ms each.
Repeat, tones on and off 500 ms ± 50 ms each.
Reat, tones on 2 ± 0.2 s, tones off 4 ± 0.4 s
Three bursts tones on and off 100 ms ± 20 ms each followed by dial tone.
Tones on 1 ± 0.2s, followed by single 440 Hz on for 0.2s on, and silence for 3 ±
0.3 s, repeat.
Repeat alternating tones, each on for 230 ms ± 70 ms with total cycle of 500 ±
50 ms.
One burst 200 ± 100 ms
One burst of tone on 1.75 ± 0.25 s before attendant intrudes, followed by burst
of tone 0.65 ± 0.15 s on, 8 to 20 s apart for as long as the call lasts
One burst of tone for 3 ± 1 s before overriding station intrudes
Three bursts on and off 100 ms each or 100 ms on, 100 ms off, 300 ms on
Rev. 1 www.clare.com
3


3Pages


M-991-02SM 電子部品, 半導体
CLARE LOCATIONS
Clare Headquarters
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Clare Switch Division
4315 N. Earth City Expressway
Earth City, MO 63045
Tel: 1-314-770-1832
Fax: 1-314-770-1812
Clare Micronix Division
145 Columbia
Aliso Viejo, CA 92656-1490
Tel: 1-949-831-4622
Fax: 1-949-831-4628
SALES OFFICES
AMERICAS
Americas Headquarters
Clare
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Eastern Region
Clare
603 Apache Court
Mahwah, NJ 07430
Tel: 1-201-236-0101
Fax: 1-201-236-8685
Toll Free: 1-800-27-CLARE
Central Region
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Western Region
Clare
1852 West 11th Street, #348
Tracy, CA 95376
Tel: 1-209-832-4367
Fax: 1-209-832-4732
Toll Free: 1-800-27-CLARE
Canada
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
EUROPE
European Headquarters
CP Clare nv
Bampslaan 17
B-3500 Hasselt (Belgium)
Tel: 32-11-300868
Fax: 32-11-300890
France
Clare France Sales
Lead Rep
99 route de Versailles
91160 Champlan
France
Tel: 33 1 69 79 93 50
Fax: 33 1 69 79 93 59
Germany
Clare Germany Sales
ActiveComp Electronic GmbH
Mitterstrasse 12
85077 Manching
Germany
Tel: 49 8459 3214 10
Fax: 49 8459 3214 29
Italy
C.L.A.R.E.s.a.s.
Via C. Colombo 10/A
I-20066 Melzo (Milano)
Tel: 39-02-95737160
Fax: 39-02-95738829
Sweden
Clare Sales
Comptronic AB
Box 167
S-16329 Spånga
Tel: 46-862-10370
Fax: 46-862-10371
United Kingdom
Clare UK Sales
Marco Polo House
Cook Way
Bindon Road
Taunton
UK-Somerset TA2 6BG
Tel: 44-1-823 352541
Fax: 44-1-823 352797
Worldwide Sales Offices
ASIA/PACIFIC
Asian Headquarters
Clare
Room N1016, Chia-Hsin, Bldg II,
10F, No. 96, Sec. 2
Chung Shan North Road
Taipei, Taiwan R.O.C.
Tel: 886-2-2523-6368
Fax: 886-2-2523-6369
http://www.clare.com
Clare, Inc. makes no representations or warranties with respect to
the accuracy or completeness of the contents of this publication
and reserves the right to make changes to specifications and
product descriptions at any time without notice. Neither circuit
patent licenses nor indemnity are expressed or implied. Except as
set forth in Clare’s Standard Terms and Conditions of Sale, Clare,
Inc. assumes no liability whatsoever, and disclaims any express or
implied warranty, relating to its products including, but not limit-
ed to, the implied warranty of merchantability, fitness for a partic-
ular purpose, or infringement of any intellectual property right.
The products described in this document are not designed,
intended, authorized or warranted for use as components in sys-
tems intended for surgical implant into the body, or in other appli-
cations intended to support or sustain life, or where malfunction
of Clare’s product may result in direct physical harm, injury, or
death to a person or severe property or environmental damage.
Clare, Inc. reserves the right to discontinue or make changes to its
products at any time without notice.
Specification: DS-M991-R1
©Copyright 2001, Clare, Inc.
All rights reserved. Printed in USA.
7/26/01

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ M-991-02SM データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
M-991-02SM

Call Progress Tone Generator

Clare  Inc.
Clare Inc.
M-991-02SMTR

Call Progress Tone Generator

Clare  Inc.
Clare Inc.


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap