|
|
PDF GDM19264-05 Data sheet ( Hoja de datos )
| Número de pieza | GDM19264-05 | |
| Descripción | LCD Component | |
| Fabricantes | PACIFIC DISPLAY | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GDM19264-05 (archivo pdf) en la parte inferior de esta página. Total 18 Páginas | ||
|
No Preview Available !
PACIFIC DISPLAY DEVICES
LCD Component Data Sheet
Model Number: 19264-05
192 x 64 Dot
Graphic LCD Assembly
With KS0107 / KS108 Graphics Controller
LED Backlight
CONTENTS
1. GENERAL INFORMATION
1.1 Product Overview
1.2 Part Options and Numbering System
1.3 Absolute Maximum Ratings
1.4 Circuit Block Diagram
1.5 Mechanical Characteristics
1.6 Input Signal Function
1.7 LCM Power, Contrast Control and Bias
1.8 LCD Dimensions
2
2
3
3
3
4
4
5
2. ELECTRICAL / OPTICAL CHARACTERISTICS
2.1 DC Electrical Characteristics
2.2 AC Electrical Characteristics
2.3 Optical Characteristics
2.4 LED Backlight Characteristics
6
7
9
10
3. LCD CONTROLLER CHARACTERISTICS
3.1 LCD Controller Display and Control Functions (KS0107 / KS0108) 11
3.2 LCD Controller Character Code map
14
4. RELIABILITY
15
5. PRECAUTIONS FOR USING LCD MODULES
16
139 Avenida Victoria – Suite 100 – San Clemente, CA – 92672
Tel: 949-361-8957 – Fax: 949-361-9158 – Web: www.pacificdisplay.com
1 page  
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
1.8 LCM Dimensions
■ Module Dimensions
MODEL NO: 19264-05
PACIFIC DISPLAY DEVICES
06.27.2003
5
5 Page 
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 19264-05
3. OPERATING PRINCIPALS AND METHODS
3.1 LCD Controller Display and Control Functions (KS0108 Controller)
■ I/O Buffer
Input buffer controls the status between the enable and disable of chip. Unless the CS1 or CS2 is in active mode,
input or output of data and instruction do not execute. Therefore internal state is not change. But RSTB can operate
regardless of CS1 and CS2.
■ Input Register
Input register is provided to interface with MPU which is different operating frequency. Input register stores the
data temporarily before writing it into display data RAM.
When CS1 or CS2 is in the active mode, R/W and RS select the input register. The data from MPU is written into
input register and then write it into display data RAM. Data is latched when falling of the E signal and written
automatically into the display data RAM by internal operation.
■ Output Register
Output register stores the data temporarily from display data RAM when CS1 or CS2 is in active mode and R/W
and RS = H. Stored data in display data RAM is latched in output register. When CS1 or CS2 is in active mode and R/W =
H, RS = L, status data (busy check) can be read out.
To read the contents of display data RAM, twice access of read instruction is needed. In first access, data in
display data RAM is latched into output register. In second access, MPU can read data which is latched. That is, to read the
data in display data RAM, it needs dummy read. But status read does not need dummy read.
RS R/W
Function
0 0 Instruction
1 Status read (busy check)
1 0 Data write (from input register to display data RAM)
1 Data read (from display data RAM to output register)
■ Reset
System reset can be initialized by setting RST terminal at low level when turning power on, receiving instruction
from MPU. When RST becomes low, following procedure is occurred.
1. Display off
2. Display start line register become set by 0. ( Z-address 0 )
While RST is low level, no instruction except status read can be accepted. Reset status appears at DB4. After DB4
is low, any instruction can be accepted.
The Conditions of power supply at initial power up are shown in table 1.
Table 1. Power Supply Initial Conditions
Item
Reset time
Rise time
Symbol
tRST
tr
VDD
RST
Min.
1.0
---
4.5V
Typ.
---
---
tRST
tr
0.7VDD
0.3VDD
Max.
---
200
Unit
us
ns
PACIFIC DISPLAY DEVICES
06.27.2003
11
11 Page | ||
| Páginas | Total 18 Páginas | |
| PDF Descargar | [ Datasheet GDM19264-05.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GDM19264-05 | LCD Component | PACIFIC DISPLAY |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |