|
|
Número de pieza | HMC433E | |
Descripción | SMT GaAs HBT MMIC | |
Fabricantes | Analog Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC433E (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! v04.0410
Typical Applications
4 Prescaler for DC to C Band PLL Applications:
• UNII, Point-to-Point & VSAT Radios
• 802.11a & HiperLAN WLAN
• Fiber Optic
• Cellular / 3G Infrastructure
Functional Diagram
HMC433 / 433E
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 8 GHz
Features
Ultra Low SSB Phase Noise: -150 dBc/Hz
Single-Ended I/O’s
Output Power: -2 to -3.5 dBm
Single DC Supply: +3V @ 53 mA
9 mm2 Ultra Small Package: SOT26
General Description
The HMC433(E) is a low noise Divide-by-4 Static
Divider utilizing InGaP GaAs HBT technology in ultra
small surface mount SOT26 plastic packages. This
device operates from DC (with a square wave input)
to 8 GHz input frequency with a single +3V DC supply.
Single-ended inputs and outputs reduce component
count and cost. The low additive SSB phase noise of
-150 dBc/Hz at 100 kHz offset helps the user maintain
good system noise performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= +3V
Parameter
Conditions
Maximum Input Frequency
Minimum Input Frequency
Sine Wave Input. [1]
Input Power Range
Fin= 1 to 6 GHz
Fin= 6 to 8 GHz
Output Power
Fin= 4 GHz
Fin= 8 GHz
Reverse Leakage
RF Output Terminated, Fin= 4 GHz, Pin= 0 dBm
SSB Phase Noise (100 kHz offset)
Pin= 0 dBm, Fin= 4 GHz
Output Transition Time
Pin= 0 dBm, Fout= 882 MHz
Supply Current (Icc)
Vcc= +3.0V
1. Divider will operate down to DC for square-wave input signal.
Min.
8
-12
-3
-5.0
-6.5
Typ.
8.5
0.2
-2.0
-3.5
-25
-150
120
53
Max.
+12
+10
71
Units
GHz
GHz
dBm
dBm
dBm
dBm
dBm
dBc/Hz
ps
mA
4 - 72
IrrlTiniecgrfaseohpdntrsFeomsemnoaosfatiisirbtrohkingislprirtdayafrunnpiirsdtcnaeairdrsetesihegsb,esuiysdmdttheimebaeredtypldmlbiiAcvtyaranPayeAtadiorlhnroeenaymgsoluooanlDargtrkeofenDrsvtohe:idamcevr9eAreicwistt7etsopihssie8usepfspop-beulrr2.nelioiacdtSlp5iseepecavur0reetsetcya-deiinofo,3iyocftnno3atoprhtrdiae4boSftienoere3srnuraertasspcsnoupcyrb:peujipcernHFoaatcfirtvttareiieentttnogxt:aotiecnw:rtPmhdiegn9aeehhnrn7rteMgssotls.8eiaonoibwf-cfel2Aieptrh:n.5aooatH9ue0lwoton7g-wntas38oDeotvvi3e-creev2eo7ri,.ct5h3eNCnes0oor.o-r3pFOPA3Ooohpn4rrorpe3danlpiTectreii:aorocc7treinhO8o,n,1nnaod-2S3lpe-o02lulgpii9vpnyAse-pe4rW@oly7par,a0hthy:ta0i,aPntw•PtdhiR.OwtoOetnoor.w.decBa:ep.odo1hrlax-mo,i8ctn9Cet0l1ii0tn0hoe-e6rAe.d,caNleNmtoArwosmsL:rwOwfAowGonro.d-aadDln,o,agMMloADAge.0cv02oic10me68s22,-49In10c.6,
1 page v04.0410
Outline Drawing
HMC433 / 433E
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 8 GHz
4
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOT FOR SUGGESTED
LAND PATTERN.
Part Number
HMC433
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC433E
RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 [1]
MSL1 [2]
Package Marking [3]
H433
XXXX
433E
XXXX
Pin Description
Pin Number
Function
1, 4 N/C
2 GND
Description
The pins are not connected internally; however, all
data shown herein was measured with these pins
connected to RF/DC ground externally.
Pin must connect ro RF/DC ground.
3 IN
RF input must be DC blocked.
Interface Schematic
IrrlTiniecgrfaseohpdntrsFeomsemnoaosfatiisirbtrohkingislprirtdayafrunnpiirsdtcnaeairdrsetesihegsb,esuiysdmdttheimebaeredtypldmlbiiAcvtyaranPayeAtadiorlhnroeenaymgsoluooanlDargtrkeofenDrsvtohe:idamcevr9eAreicwistt7etsopihssie8usepfspop-beulrr2.nelioiacdtSlp5iseepecavur0reetsetcya-deiinofo,3iyocftnno3atoprhtrdiae4boSftienoere3srnuraertasspcsnoupcyrb:peujipcernHFoaatcfirtvttareiieentttnogxt:aotiecnw:rtPmhdiegn9aeehhnrn7rteMgssotls.8eiaonoibwf-cfel2Aieptrh:n.5aooatH9ue0lwoton7g-wntas38oDeotvvi3e-creev2eo7ri,.ct5h3eNCnes0oor.o-r3pFOPA3Ooohpn4rrorpe3danlpiTectreii:aorocc7treinhO8o,n,1nnaod-2S3lpe-o02lulgpii9vpnyAse-pe4rW@oly7par,a0hthy:ta0i,aPntw•PtdhiR.OwtoOetnoor.w.decBa:ep.odo1hrlax-mo,i8ctn9Cet0l1ii0tn0hoe-e6rAe.d,caNleNmtoArwosmsL:rwOwfAowGonro.d-aadDln,o,agMMloADAge.0cv02oic10me68s22,-49In10c.6,
4 - 75
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet HMC433E.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC433 | SMT GaAs HBT MMIC | Hittite Microwave Corporation |
HMC433E | SMT GaAs HBT MMIC | Analog Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |