|
|
Número de pieza | GRM188B11H682MA01J | |
Descripción | Capacitor ( Condenser ) | |
Fabricantes | Murata Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de GRM188B11H682MA01J (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! Chip Monolithic Ceramic Capacitor for General
GRM188B11H682MA01_ (0603, B:JIS, 6800pF, DC50V)
_: packaging code
Reference Sheet
1.Scope
This product specification is applied to Chip Monolithic Ceramic Capacitor used for General Electronic equipment.
2.MURATA Part NO. System
(Ex.) GRM
18
8
B1
(1)L/W
(2)T
(3)Temperature
Dimensions Dimensions Characteristics
1H
(4)Rated
Voltage
682 M
(5)Nominal (6)Capacitance
Capacitance Tolerance
A01 D
(7)Murata’s (8)Packaging
Control Code
Code
3. Type & Dimensions
(1)-1 L
1.6±0.1
(1)-2 W
0.8±0.1
(2) T
0.8±0.1
e
0.2 to 0.5
(Unit:mm)
g
0.5 min.
4.Rated value
(3) Temperature Characteristics
(Public STD Code):B(JIS)
Temp. coeff
or Cap. Change
Temp. Range
(Ref.Temp.)
-10 to 10 %
-25 to 85 °C
(20 °C)
(4)
Rated
Voltage
(5) Nominal
Capacitance
(6)
Capacitance
Tolerance
Specifications and Test
Methods
(Operating
Temp. Range)
DC 50 V 6800 pF ±20 %
-25 to 85 °C
5.Package
mark
(8) Packaging
D f180mm Reel
PAPER W8P4
J f330mm Reel
PAPER W8P4
Packaging Unit
4000 pcs./Reel
10000 pcs./Reel
Product specifications in this catalog are as of Feb.28,2016,and are subject to change or obsolescence without notice.
Please consult the approval sheet before ordering.
Please read rating and !Cautions first.
GRM188B11H682MA01-01
1
1 page Substrate Bending test
・Test substrate
Material : Copper-clad laminated sheets for PCBs
(Glass fabric base, epoxy resin)
Thickness : 1.6mm (GRM02/GRM03/GRM15: t:0.8mm)
Copper foil thickness : 0.035mm
: Solder resist
(Coat with heat resistant resin for solder)
Land b
f4.5
a
100
Type
GRM02
GRM03
GRM15
GRM18
GRM21
GRM31
GRM32
Dime*n1s,2io:n2(.m0±m0).05
4.0±0.1
a b cφ1.
5
+
-
0.1
0
*1 *2
0.2 0.56 0.23
0.3 0.9 0.3
0.4 A 1.5
1.0 3.0
0.5
1.2
1.2 4.0 1.65
2.2 5.0 2.00.05以下
2.2 5.0 2.9
Fig.1
・TKeinsdt souf bSsotrldaeter : Sn-3.0Ag-0.5Cu
・TPeresst surbizsatrtaioten method
(in mm)
50 min.
20
Pressurization
speed
1.0mm/s
Pressurize
tor
R5
Support
Capacitance meter
45 45
Flexure
Fig.2
(in mm)
Adhesive Strength of Termination, Vibration, Temperature Sudden Change, Resistance to Soldering Heat (Reflow method)
High Temperature High Humidity(Steady) , Durability
・Test substrate
Material : Copper-clad laminated sheets for PCBs
(Glass fabric base, epoxy resin)
Thickness : 1.6mm or 0.8mm
Copper foil thickness : 0.035mm
・TKeinsdt souf bSsotrldaeter : Sn-3.0Ag-0.5Cu
・TLeasntdsDubimsternasteions
Chip Capacitor
a
b
Land
Solder Resist
Type
GRM02
GRM03
GRM15
GRM18
GRM21
GRM31
GRM32
Fig.3
Dimension (mm)
abc
0.2 0.56 0.23
0.3 0.9 0.3
0.4 1.5 0.5
1.0 3.0 1.2
1.2 4.0 1.65
2.2 5.0 2.0
2.2 5.0 2.9
t
JEMCGS-0001U
5
5 Page チップ詰め状態
(単位:mm)
Package
GRM Type
1.3 Tapes for capacitors are wound clockwise shown in Fig.3.
(The sprocket holes are to the right as the tape is pulled toward the user.)
1.4 Part of the leader and part of the vacant section are attached as follows.
Tail vacant Section Chip-mounting Unit Leader vacant Section
(in:mm)
Leader Unit
(Top Tape only)
160 min.
190 min.
210 min.
Direction
of Feed
1.5 Accumulate pitch : 10 of sprocket holes pitch = 20±0.3mm(GRM01/02)
40±0.3mm(GRM03 min.)
1.6 Chip in the tape is enclosed by top tape and bottom tape as shown in Fig.1.
1.7 The top tape and base tape are not attached at the end of the tape for a minimum of 5 pitches.
1.8 There are no jointing for top tape and bottom tape.
1.9 There are no fuzz in the cavity.
1.10 Break down force of top tape : 5N min.
Break down force of bottom tape : 5N min. (Only a bottom tape existence )
図1 チッフ1゚詰.1め1 R状e態el is made by resin and appeaser and dime(単ns位io:nmmis)shown in Fig 2.
There are possibly to change the material and dimension due to some impairment.
1.12 Peeling off force : 0.1N to 0.6N* in the direction as shown below.
* GRM01/02/03:0.05N~0.5N
165~180°
Top tape
1.13 Label that show the customer parts number, our parts number, our company name, inspection
number and quantity, will be put in outside of reel.
JEMCGP-01796E
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet GRM188B11H682MA01J.PDF ] |
Número de pieza | Descripción | Fabricantes |
GRM188B11H682MA01D | Capacitor ( Condenser ) | Murata Electronics |
GRM188B11H682MA01J | Capacitor ( Condenser ) | Murata Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |