|
|
Datasheet AD824 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | AD824 | FET-Input Op Amp Data Sheet
FEATURES
Single supply operation: 3 V to 30 V Very low input bias current: 2 pA Wide input voltage range Rail-to-rail output swing Low supply current per amplifier: 500 µA Wide bandwidth: 2 MHz Slew rate: 2 V/µs No phase reversal
APPLICATIONS
Photo diode preamplifier Battery powered ins |  Analog Devices | data |
| 2 | AD8240 | LED Driver/Monitor
LED Driver/Monitor
AD8240
FEATURES
PWM input for LED brightness control Open LED detection Latch-off overcurrent protection Constant voltage regulated output Supply range: 9 V to 27 V Regulated voltage range: 12.5 V to 27 V Operating current: 300 µA Shutdown current: 10 µA Te | Analog Devices | driver |
| 3 | AD8244 | Precision FET Input Quad Buffer Data Sheet
FEATURES
Low power 250 µA maximum supply current per amplifier FET input 2 pA maximum input bias current at 25°C Extremely high input impedance Low noise 13 nV/√Hz voltage noise at 1 kHz 0.4 µV p-p voltage noise (0.1 Hz to 10 Hz) 0.8 fA/√Hz current noise at 1 kHz High dc precision | Analog Devices | buffer |
AD8 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | AD800 | Clock Recovery and Data Retiming Phase-Locked Loop a
FEATURES Standard Products 44.736 Mbps—DS-3 51.84 Mbps—STS-1 155.52 Mbps—STS-3 or STM-1 Accepts NRZ Data, No Preamble Required Recovered Clock and Retimed Data Outputs Phase-Locked Loop Type Clock Recovery—No Crystal Required Random Jitter: 20؇ Peak-to-Peak Pattern Jitter: Virtually Elimi Analog Devices data | | |
| 2 | AD8000 | Ultrahigh Speed Op Amp Data Sheet
1.5 GHz, Ultrahigh Speed Op Amp AD8000
FEATURES
High speed 1.5 GHz, −3 dB bandwidth (G = +1) 650 MHz, full power bandwidth (G = +2, VO = 2 V p-p) Slew rate: 4100 V/μs 0.1% settling time: 12 ns
Excellent video specifications 0.1 dB flatness: 170 MHz Differential gain: 0.02% Differenti Analog Devices data | | |
| 3 | AD8001 | Current Feedback Amplifier a
800 MHz, 50 mW Current Feedback Amplifier
AD8001
FEATURES Excellent Video Specifications (RL = 150 ⍀, G = +2)
Gain Flatness 0.1 dB to 100 MHz 0.01% Differential Gain Error 0.025؇ Differential Phase Error Low Power 5.5 mA Max Power Supply Current (55 mW) High Speed and Fast Settling 880 MHz, Analog Devices amplifier | | |
| 4 | AD8002 | Dual 600 MHz/ 50 mW Current Feedback Amplifier Data Sheet
FEATURES
Excellent video specifications (RL = 150 Ω, G = +2) Gain flatness: 0.1 dB to 60 MHz Differential gain error: 0.01% Differential phase error: 0.02°
Low power Maximum power supply current (50 mW): 5.0 mA/amp
High speed and fast settling −3 dB bandwidth (G = +1): 600 MHz −3 dB Analog Devices amplifier | | |
| 5 | AD8003 | 1.5 GHz Op Amp Data Sheet
FEATURES
High speed 1650 MHz (G = +1) 730 MHz (G = +2, VO = 2 V p-p) 4300 V/µs (G = +2, 4 V step) Settling time 12 ns to 0.1%, 2 V step
Excellent for QXGA resolution video Gain flatness 0.1 dB to 190 MHz 0.05% differential gain error, RL = 150 Ω 0.01° differential phase error, RL = 15 Analog Devices data | | |
| 6 | AD8004 | Current Feedback Amplifier a
Quad 3000 V/s, 35 mW Current Feedback Amplifier
AD8004
FEATURES High Speed
250 MHz –3 dB Bandwidth (G = +1) 3000 V/s Slew Rate 21 ns Settling Time to 0.1% 1.8 ns Rise Time for 2 V Step Low Power 3.5 mA/Amp Power Supply Current (35 mW/Amp) Single Supply Operation Fully Specified for +5 V Analog Devices amplifier | | |
| 7 | AD8005 | Current Feedback Amplifier Data Sheet
FEATURES
Ultralow power 400 μA power supply current (4 mW on ±5 VS) Specified for single supply operation
High speed 270 MHz, −3 dB bandwidth (G = +1) 170 MHz, −3 dB bandwidth (G = +2) 280 V/μs slew rate (G = +2) 28 ns settling time to 0.1%, 2 V step (G = +2)
Low distortion/noise � Analog Devices amplifier | |
| Esta página es del resultado de búsqueda del AD824. Si pulsa el resultado de búsqueda de AD824 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |