DataSheet.jp

LD02CM の電気的特性と機能

LD02CMのメーカーはTELEDYNEです、この部品の機能は「DC Solid-State Relay」です。


製品の詳細 ( Datasheet PDF )

部品番号 LD02CM
部品説明 DC Solid-State Relay
メーカ TELEDYNE
ロゴ TELEDYNE ロゴ 




このページの下部にプレビューとLD02CMダウンロード(pdfファイル)リンクがあります。

Total 4 pages

No Preview Available !

LD02CM Datasheet, LD02CM PDF,ピン配置, 機能
Series KD/LD
10A, 60Vdc Optically Isolated, Short-Circuit Protected
DC Solid-State Relay
Part Number* Relay Description
KD00CK
5A Solid-State Relay (SSR)
KD02CK
5A SSR with Switch Status
KD20CK
5A SSR with Short-Circuit Protection
KD22CK
5A SSR with Short-Circuit Protection and Switch
Status
LD00CM
10A Solid-State Relay
LD02CM
10A SSR with Switch Status
LD20CM
10A SSR with Short-Circuit Protection
LD22CM
10A SSR with Short-Circuit Protection and Switch
Status
* The Y suffix denotes parameters tested to MIL-PRF-28750 specifications.
The W suffix denotes parameters tested to Teledyne specifications.
ELECTRICAL SPECIFICATIONS
(-55°C TO +105°C UNLESS OTHERWISE NOTED)
INPUT (CONTROL) SPECIFICATION
When used in 2 terminal configuration
(TTL or direct control) (See Fig. 1) Min Typ Max Units
Input Current @ VBIAS = 5 Vdc (See Fig. 2)
Turn-Off Voltage (Guaranteed Off)
15 mAdc
1.5 Vdc
Turn-On Voltage (Guaranteed On)
3.8
Vdc
Reverse Voltage Protection
-32 Vdc
Input Supply Range (See Note 1)
3.8
32 Vdc
INPUT (CONTROL) SPECIFICATION
When used in 3 terminal configuration
(CMOS or open collector TTL) (See Fig. 1) Min Typ
Control Current
V = 5 Vdc
CONTROL
VCONTROL = 18 Vdc
Control Voltage Range
0
Max Units
250 µAdc
1 mAdc
18 Vdc
Bias Supply Voltage (See Note 1)
3.8
32 Vdc
Bias Supply Current
16 mAdc
Turn-Off Voltage (Guaranteed Off)
3.2
Vdc
Turn-On Voltage (Guaranteed On)
0.3 Vdc
FEATURES
• Available with short-circuit/current
overload protection
• Available with switch status output
• TTL and CMOS compatible control
• Low ON resistance power FET output
• Fast switching speed
• Meets 28 Vdc system requirements of
MIL-STD-704
• Optical isolation
• Low profile hermetic package
• Built and tested to the requirements of
MIL-PRF-28750
DESCRIPTION
The Series KD and LD solid-state relays
are screened utilizing MIL-PRF-28750
test methods and are packaged in low
profile hermetically sealed cases. These
relays are constructed with state-of-the-
art solid state techniques and feature
fully floating power FET output
technology. This allows the load to be
connected to either output terminal and
provides a low ON resistance. The input
(control) and output are optically isolated
to protect input logic circuits from output
transients. Available options include
short circuit and current overload
protection, which provides complete
protection for both the relay and system
wiring. This feature not only provides
protection should a short or overload
occur while the relay is on, but will also
provide protection should the relay be
switched into a short. The second option
is a status output line. Switch status
returns the true status of the output
switch and is optically isolated from the
load. It provides status indication
independent of the control circuit of the
relay. The status line provides a logic 0
(low) when the relay output is off with
load voltage and continuity present, and
a logic 1 (high) when the output is on.
© 2002 TELEDYNE RELAYS
(800) 284-7007 • www.teledynerelays.com
KD/LD 51
KD/LD\072002\Q1

1 Page





LD02CM pdf, ピン配列
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
Operating
Storage
Min Typ Max Units
-55 +105 °C
-55 +125 °C
Vibration 100 g
10 3000 Hz
Constant Acceleration
5000 g
Shock 0.5 ms pulse
1500 g
STATUS OUTPUT TRUTH TABLE
(KD02CK, LD02CM, KD22CK, LD22CM)
Control Voltage Relay Output
State Status Output Level
High
Off
Low
(V
SO
0.4
Vdc)
Low On
High (V = V )
SO STATUS
STATUS OUTPUT SPECIFICATIONS
(KD02CK, LD02CM, KD22CK, LD22CM)
Status Supply Voltage
Status Leakage Current
@16Vdc
@30Vdc
Status (sink) Current (V < 0.4 Vdc)
SO
Status Turn-On Time (See Fig. 6)
Status Turn-Off Time (See Fig. 6)
Min Typ Max Units
30 Vdc
10 µAdc
100 µAdc
600 µAdc
3.5 ms
8.0 ms
Series KD/LD
BIAS (INPUT) CURRENT VS BIAS (INPUT) VOLTAGE
FIGURE 2 (See Note 1)
WIRING CONFIGURATIONS
FIGURE 1 (See Note 1)
© 2002 TELEDYNE RELAYS
(800) 284-7007 • www.teledynerelays.com
KD/LD 53
KD/LD\072002\Q1


3Pages





ページ 合計 : 4 ページ
 
PDF
ダウンロード
[ LD02CM データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
LD02CM

DC Solid-State Relay

TELEDYNE
TELEDYNE


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap