DataSheet.jp

VND7030AJ の電気的特性と機能

VND7030AJのメーカーはSTMicroelectronicsです、この部品の機能は「Double channel high-side driver」です。


製品の詳細 ( Datasheet PDF )

部品番号 VND7030AJ
部品説明 Double channel high-side driver
メーカ STMicroelectronics
ロゴ STMicroelectronics ロゴ 




このページの下部にプレビューとVND7030AJダウンロード(pdfファイル)リンクがあります。

Total 30 pages

No Preview Available !

VND7030AJ Datasheet, VND7030AJ PDF,ピン配置, 機能
VND7030AJ
Double channel high-side driver with MultiSense analog
feedback for automotive applications
Datasheet - production data
Loss of ground and loss of VCC
Reverse battery with external
components
Electrostatic discharge protection
Features
Max transient supply voltage
Operating voltage range
Typ. on-state resistance (per Ch)
Current limitation (typ)
Standby current (max)
VCC 40 V
VCC 4 to 28 V
RON 31
ILIMH 56 A
ISTBY 0.5 µA
Automotive qualified
General
Double channel smart high-side driver
with MultiSense analog feedback
Very low standby current
Compatible with 3 V and 5 V CMOS
outputs
MultiSense diagnostic functions
Multiplexed analog feedback of: load
current with high precision proportional
current mirror, VCC supply voltage and
TCHIP device temperature
Overload and short to ground (power
limitation) indication
Thermal shutdown indication
OFF-state open-load detection
Output short to VCC detection
Sense enable/disable
Protections
Undervoltage shutdown
Overvoltage clamp
Load current limitation
Self limiting of fast thermal transients
Configurable latch-off on
overtemperature or power limitation
with dedicated fault reset pin
Applications
All types of Automotive resistive, inductive
and capacitive loads
Specially intended for automotive signal
lamps (up to 2 x P21W or SAE1156 and
R5W paralleled or LED rear combinations)
Description
The device is a double channel high-side driver
manufactured using ST proprietary VIPower® M0-
7 technology and housed in PowerSSO-16
package. The device is designed to drive 12 V
automotive grounded loads through a 3 V and
5 V CMOS-compatible interface, providing
protection and diagnostics.
The device integrates advanced protective
functions such as load current limitation, overload
active management by power limitation and
overtemperature shutdown with configurable
latch-off.
A FaultRST pin unlatches the output in case of
fault or disables the latch-off functionality.
A dedicated multifunction multiplexed analog
output pin delivers sophisticated diagnostic
functions including high precision proportional
load current sense, supply voltage feedback and
chip temperature sense, in addition to the
detection of overload and short circuit to ground,
short to VCC and OFF-state open-load.
A sense enable pin allows OFF-state diagnosis to
be disabled during the module low-power mode
as well as external sense resistor sharing among
similar devices.
May 2015
DocID027403 Rev 1
1/46
This is information on a product in full production.
www.st.com

1 Page





VND7030AJ pdf, ピン配列
VND7030AJ
List of tables
List of tables
Table 1: Pin functions .................................................................................................................................5
Table 2: Suggested connections for unused and not connected pins........................................................6
Table 3: Absolute maximum ratings ...........................................................................................................7
Table 4: Thermal data.................................................................................................................................8
Table 5: Power section ...............................................................................................................................8
Table 6: Switching.......................................................................................................................................9
Table 7: Logic inputs.................................................................................................................................10
Table 8: Protections ..................................................................................................................................11
Table 9: MultiSense ..................................................................................................................................11
Table 10: Truth table.................................................................................................................................19
Table 11: MultiSense multiplexer addressing ...........................................................................................19
Table 12: ISO 7637-2 - electrical transient conduction along supply line.................................................28
Table 13: MultiSense pin levels in off-state ..............................................................................................32
Table 14: PCB properties .........................................................................................................................36
Table 15: Thermal parameters .................................................................................................................38
Table 16: PowerSSO-16 mechanical data................................................................................................39
Table 17: Reel dimensions .......................................................................................................................41
Table 18: PowerSSO-16 carrier tape dimensions ....................................................................................42
Table 19: Device summary .......................................................................................................................44
Table 20: Document revision history ........................................................................................................45
DocID027403 Rev 1
3/46


3Pages


VND7030AJ 電子部品, 半導体
Block diagram and pin description
Figure 2: Configuration diagram (top view)
VND7030AJ
Table 2: Suggested connections for unused and not connected pins
Connection /
pin
MultiSense N.C. Output
Input
SEn, SELx,
FaultRST
Floating
To ground
Not allowed
Through 1
resistor
X (1)
X
X
Not
allowed
X
Through 15
resistor
X
Through 15
resistor
Notes:
(1)X: do not care.
6/46 DocID027403 Rev 1

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ VND7030AJ データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
VND7030AJ

Double channel high-side driver

STMicroelectronics
STMicroelectronics


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap