|
|
PDF VE-200 Data sheet ( Hoja de datos )
| Número de pieza | VE-200 | |
| Descripción | DC-DC Converters | |
| Fabricantes | VICOR Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de VE-200 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
DC-DC Converters
VI-200
VE-200
®S
C US C NRTL US
50 to 200 Watts
Features & Benefits
• Isolated output
• Up to 50 W/in3
• cURus, cTÜVus
• Up to 90% efficiency
• Size: 4.6” x 2.4” x 0.5”
(116,8 x 61,0 x 12,7mm)
• Remote sense and current limit
• OVP, thermal shutdown
• Logic disable
• Wide range output adjust
• Compatible power booster modules
• ZCS power architecture
• Low noise FM control
• CE Marked
• RoHS compliant (VE-200)
Product Highlights
The VI-200 family, with over 14 million units shipped, is Vicor’s broad series of
“zero-current-switching” component-level DC-DC converters.
Operating at frequencies up to 2MHz, VI-200 family converters offer exceptional power
density, efficiency, noise performance, reliability and ease of use. Booster modules
(VI-Bxx) provide a simple, cost-effective, off-the-shelf solution for higher power output
requirements. One or more boosters may be used to create synchronous arrays capable
of supplying several kilowatts of output power.
The flexibility of Vicor’s power components is also available in half-size, half-power
VI-J00 MiniMods.
Part Numbering
VI — 2 6 1 — C W
Family Series
Input
VI = Non-RoHS 2 = 200
0 = 12 V N = 48 V
VE = RoHS
B = Booster V = 24 V 4 = 72 V
1 = 24 V T = 110 V
No te: F or add itio nal
pac kag ing op tion s,
ple ase se e pa ge 5.
W = 24 V
2 = 36 V
3 = 48 V
5 = 150 V
6 = 300 V
7 = 150/300 V
Z = 2 V
Y = 3.3 V
0 = 5 V
X = 5.2 V
W = 5.5 V
V = 5.8 V
T = 6.5 V
R = 7.5 V
Output
Grade
Power
M = 10 V K = 40 V E = –10 to 85°C
≥ 5V
< 5V
1 = 12 V 4 = 48 V C = –25 to 85°C U = 200W U = 40A
P = 13.8 V H = 52 V I = – 40 to 85°C V = 150W V = 30A
2 = 15 V F = 72 V M = –55 to 85°C W = 100W W = 20A
N = 18.5 V D = 85 V
X = 75W X = 15A
3 = 24 V B = 95 V
Y = 50W Y = 10A
L = 28 V
J = 36 V
VI-200 DC-DC Converters
Page 1 of 6
Rev 3.7
09/2016
vicorpower.com
800 927.9474
1 page  
Mechanical Drawing
VI-200 Mechanical Drawing
VI-200, VE-200
.50
(12,7)
.30±.015
(7,6)±(0,38)
1.80
(45,7)
4.60
(116,8)
3.60
(91,4)
2.10
(53,3)
4
3
2
1
VI-200
9
8
7
6
5
.15
(3,8)
FULL R
.15
(3,8)
Product ID
this surface
4.20
(106,7)
Standard
0.080 (2,0) Dia (2) places
Solder plate over copper alloy
RoHS
0.080 (2,0) Dia (2) places
Matte tin over copper alloy
1.40
1.00 (35,6)
.70 (25,4)
.40 (17,8)
(10,2)
.35±.015
(8,9)±(0,38)
Pin # Function
1 +In
2 Gate In
3 Gate Out
4 -In
5 +Out
6* +Sense
7* Trim
8* -Sense
9 -Out
* Do not connect on booster modules
Standard
.040 (1,0) Dia (7) places
Solder plate over copper alloy
RoHS
.040 (1,0) Dia (7) places
Matte tin over copper alloy
.22
(5,6) MIN
.30
(7,6) Min
2.40
(61,0)
1.75
(44,5)
Max.
.12
(3,0)
.50 +.030 (0,76)
(12,7) -.000 (0)
.01
Aluminum Base
PACKAGING OPTIONS
SlimMod
Flangeless package
FinMod
Flangeless package with integral heat sink
MegaMod
Chassis mount alternatives, one, two,
or three outputs: up to 600W
4.60”L x 1.80”W x 0.50”H
(116,8 x 45,7 x 12,7mm)
To order the SlimMod configuration add the suffix “–S” to
the standard module part number.
Qty (2) grounding clips are included with each SlimMod
P/N 32187
Longitudinal, 0.25”(6.35mm) fins — add suffix “–F1”
Longitudinal, 0.50”(12.7mm) fins — add suffix “–F2”
1 up – 4.9¨ x 2.5¨ x 0.62¨ (124,4 x 63,5 x 15,7mm)
2 up – 4.9¨ x 4.9¨ x 0.62¨ (124,4 x 124,4 x 15,7mm)
3 up – 4.9¨ x 7.3¨ x 0.62¨ (124,4 x 185,4 x 15,7mm)
BusMod
Transverse, 0.25”(6.35mm) fins — add suffix “–F3”
Transverse, 0.50”(12.7mm) fins — add suffix “–F4”
Available with longitudinal or transverse fins of
0.25”(6.35 mm) or 0.50”(12.7mm) height. Add the
appropriate suffx to the module part number.
Qty (4) grounding clips are included with each FinMod
F1, F2 P/N 32185
F3, F4 P/N 32186
4.60”L x 2.40”W x 1.08”H
(116,8 x 61,0 x 27,4mm)
To order the BusMod fully assembled, add suffix “–B1”
to the standard module part number.
To order the BusMod separately:
Full-sized BusMod — P/N 06322
See BusMod Mechanical Drawings for more details.
VI-200 DC-DC Converters
Page 5 of 6
Rev 3.7
09/2016
vicorpower.com
800 927.9474
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet VE-200.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| VE-200 | DC-DC Converters | VICOR Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |