DataSheet.jp

GS2964 の電気的特性と機能

GS2964のメーカーはGennumです、この部品の機能は「Adaptive Cable Equalizer」です。


製品の詳細 ( Datasheet PDF )

部品番号 GS2964
部品説明 Adaptive Cable Equalizer
メーカ Gennum
ロゴ Gennum ロゴ 




このページの下部にプレビューとGS2964ダウンロード(pdfファイル)リンクがあります。

Total 17 pages

No Preview Available !

GS2964 Datasheet, GS2964 PDF,ピン配置, 機能
GS2964 Adaptive Cable Equalizer
Key Features
• SMPTE 424M, SMPTE 292M and SMPTE 259M
compliant
• Automatic cable equalization
• Multi-standard operation from 143Mb/s to 2.97Gb/s
• Performance optimized for 270Mb/s, 1.485Gb/s and
2.97Gb/s. Typical equalized length of Belden 1694A
cable:
Š 100m at 2.97Gb/s
Š 140m at 1.485Gb/s
Š 180m at 270Mb/s
• Supports DVB-ASI at 270Mb/s
• Manual bypass (useful for low data rates with slow
rise/fall times)
• Programmable carrier detect with squelch threshold
adjustment
• Standard EIA/JEDEC logic control and status signal
levels
• Single 3.3V power supply operation
• 215mW power consumption (typical)
• Wide temperature range of -40ºC to +85ºC
• Small footprint QFN package (4mm x 4mm)
Š Drop-in compatible with the GS2974
• Pb-free and RoHS compliant
Applications
• SMPTE 424M, SMPTE 292M and SMPTE 259M coaxial
cable serial digital interfaces
Description
The GS2964 is a high-speed BiCMOS integrated circuit
designed to equalize and restore signals received over 75Ω
coaxial cable.
The device is designed to support SMPTE 424M,
SMPTE292M and SMPTE 259M, and is optimized for
performance at 270Mb/s, 1.485Gb/s and 2.97Gb/s.
The GS2964 features DC restoration to compensate for the
DC content of SMPTE pathological test patterns.
The Carrier Detect output pin (CD) indicates whether a
valid input signal has been detected. It can be connected
directly to the MUTE pin to mute the output on loss of
carrier. A voltage programmable threshold, which can be
changed via the SQ_ADJ pin, forces CD high when the
input signal amplitude falls below the threshold. This
allows the GS2964 to distinguish between low-amplitude
SDI signals and noise at the input of the device.
The equalizing and DC restore stages are disengaged when
the BYPASS pin is HIGH. No equalization occurs in Bypass
mode.
The differential outputs can be DC-coupled to Gennum
3.3V cable drivers and reclockers and to other
industry-standard 3.3V CML logic.
The GS2964 is footprint and drop-in compatible with
existing GS2974 designs, with no additional application
changes required.
The device is available in a 16-pin, 4mm x 4mm QFN
package.
Power consumption of the GS2964 is typically 215mW.
The GS2964 is Pb-free, and the encapsulation compound
does not contain halogenated flame retardant.
This component and all homogeneous subcomponents are
RoHS compliant.
GS2964 Adaptive Cable Equalizer
Data Sheet
51913 - 3
March 2010
www.gennum.com
1 of 17

1 Page





GS2964 pdf, ピン配列
Contents
Key Features........................................................................................................................................................1
Applications.........................................................................................................................................................1
Description ........................................................................................................................................................... 1
Revision History .................................................................................................................................................2
1. Pin Out...............................................................................................................................................................4
1.1 GS2964 Pin Assignment .................................................................................................................4
1.2 GS2964 Pin Descriptions ................................................................................................................4
2. Electrical Characteristics ............................................................................................................................6
2.1 Absolute Maximum Ratings ..........................................................................................................6
2.2 DC Electrical Characteristics ........................................................................................................6
2.3 AC Electrical Characteristics ........................................................................................................7
2.4 Typical Performance Curves ........................................................................................................8
3. Input/Output Circuits ..................................................................................................................................9
4. Detailed Description.................................................................................................................................. 10
4.1 Serial Digital Inputs ...................................................................................................................... 10
4.2 Cable Equalization ........................................................................................................................ 10
4.3 Serial Digital Outputs ................................................................................................................... 10
4.4 Programmable Squelch Adjust (SQ_ADJ) .............................................................................. 11
4.5 Mute and Carrier Detect .............................................................................................................. 11
4.6 Output Rise/Fall Times ................................................................................................................ 12
5. Application Information .......................................................................................................................... 13
5.1 PCB Layout ....................................................................................................................................... 13
5.2 Typical Application Circuit ........................................................................................................ 13
6. Package & Ordering Information .......................................................................................................... 14
6.1 Package Dimensions ..................................................................................................................... 14
6.2 Packaging Data ............................................................................................................................... 14
6.3 Recommended PCB Footprint ................................................................................................... 15
6.4 Marking Diagram ........................................................................................................................... 15
6.5 Solder Reflow Profiles .................................................................................................................. 16
6.6 Ordering Information ................................................................................................................... 16
GS2964 Adaptive Cable Equalizer
Data Sheet
51913 - 3
March 2010
3 of 17


3Pages


GS2964 電子部品, 半導体
2. Electrical Characteristics
2.1 Absolute Maximum Ratings
Parameter
Supply Voltage
Input ESD Voltage (HBM)
Storage Temperature Range
Input Voltage Range (any input)
Operating Temperature Range
Solder Reflow Temperature
Value
-0.5V to +3.6V DC
5kV
-50°C < Ts < 125°C
-0.3 to (VCC +0.3)V
-40°C to +85°C
260°C
2.2 DC Electrical Characteristics
Table 2-1: DC Electrical Characteristics
VCC = 3.3V ±5%, TA = -40°C to +85°C, unless otherwise shown
Parameter
Symbol Conditions
Supply Voltage
Power Consumption
Supply Current
Output Common Mode
Voltage
Input Common Mode Voltage
SQ_ADJ DC Voltage (to mute
signal)
SQ_ADJ Range
CD Output Voltage
Mute Input Voltage Required
to Force Outputs to Mute
Mute Input Voltage Required
to Force Outputs Active
VCC
PD
Is
VCMOUT
TA = 25°C
TA = 25°C
TA = 25°C
VCMIN
TA = 25°C
0m, TA = 25°C
VCD(OH)
VCD(OL)
VMute
TA = 25°C
Carrier not
present
Carrier present
Min to Mute
VMute
Max to
Activate
Min
3.135
2.4
2.0
Typ
3.3
215
65
VCC - ΔVSDO/2
2.2
3.2
1
Max
3.465
0.4
0.8
Units
V
mW
mA
V
Notes
±5%
V–
V–
V–
V–
V–
V–
V–
GS2964 Adaptive Cable Equalizer
Data Sheet
51913 - 3
March 2010
6 of 17

6 Page



ページ 合計 : 17 ページ
 
PDF
ダウンロード
[ GS2964 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
GS2960A

HD SD SDI Receiver

Semtech
Semtech
GS2961

Receiver

Gennum
Gennum
GS2961A

HD SD SDI Receiver

Semtech
Semtech
GS2962

3G/HD/SD-SDI Serializer

GENNUM
GENNUM


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap