|
|
PDF SMB118 Data sheet ( Hoja de datos )
| Número de pieza | SMB118 | |
| Descripción | Six-Channel Programmable DC-DC Power Managers | |
| Fabricantes | Summit | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SMB118 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
PLEASE NOTE: The SMB118 has entered End-of-Life.
SMB118/218
Six-Channel Programmable DC-DC Power Managers with Battery Charger
FEATURES & APPLICATIONS
INTRODUCTION
• Digital programming of all major parameters via I2C interface
and non-volatile memory
o Output voltage setpoint/margining
o Sequencing & digital soft start
o Enable/Disable outputs independently
o Input/Output UV/OV voltage thresholds
o PWM/PFM mode
• Six programmable regulator channels with 1.5% accuracy
o Three synchronous step-down (Buck) with
internal PFETs
o One configurable step-up (Boost) or
synchronous step-down (Buck)
o One step-up (Boost)
o One adjustable output voltage LDO
• Programmable Linear Li-Ion Battery Charger
o Precharge/fast charge/termination current
o Fast Charge voltage threshold
o Float Voltage
• +2.7V to +6.0V Input Range (Higher system voltages supported)
• Built-in current limiting, UV/OV, and thermal protection
• Highly accurate reference and output voltage
• 1MHz PWM frequency and power-saving automatic PFM mode
• 96 bytes of user configurable nonvolatile memory
Applications
• Portable Media Players
• Digital camcorders/still cameras
• Smart PDA/Camera phones
• Handheld GPS/PDA’s
• TFT-LCD Displays/Monitors/TVs
SIMPLIFIED APPLICATIONS DRAWING
The SMB118 and SMB218 are highly integrated and flexible six-
channel power managers designed for use in a wide range of portable
applications. The built-in digital programmability allows system
designers to custom tailor the device to suit almost any multi-channel
power supply application from digital camcorders to mobile phones.
The SMB118 and SMB218 integrate all the essential blocks required to
implement a complete seven-channel power subsystem including three
synchronous step-down “Buck” converters, one configurable step-up
“Boost” or step-down synchronous “Buck” converter, one step-up
“Boost” converter, one linear regulator (LDO) and a fully programmable
Li-Ion battery charger. Additionally sophisticated power
control/monitoring functions required by complex systems are built-in.
These include digitally programmable output voltage setpoint, power-
up/down sequencing, enable/disable, margining and UV/OV
input/output monitoring on all channels.
The integration of features and built-in flexibility of the SMB118 and
SMB218 allows the system designer to create a “platform solution” that
can be easily modified via software without major hardware changes.
Combined with the re-programmability of the SMB118 and SMB218,
this facilitates rapid design cycles and proliferation from a base design
to futures generations of product.
The SMB118 and SMB218 are suited to battery-powered applications
with an input range of +2.7V to +6.0V and provide a very accurate
voltage regulation. Communication is accomplished via the industry
standard I2C bus. All user-programmed settings are stored in non-
volatile EEPROM of which 96 bytes may be used for general-purpose
memory applications. The commercial operating temperature range is
0C to +70C, the industrial operating range is –40C to +85C, and the
available package is a 48-pad 7mm x 7mm QFN.
+4.5V to +6.0V
DC IN
SMB118/218
Li-Ion
Charger
Step-Up
(Boost)
Channel
Li-Ion Battery
or
+2.7V to +6.0V
I2C/SMBus
Pushbutton Power
Shutdown
RESET Output
HEALTHY Output
System
Control and
Monitoring
LDO
Channel
Step-Up
(Boost) or
Step-Down
(Buck)
Channel
3 Step-
Down
(Buck)
Channels
+0.5V to +35V (Prog.)
+1.5V to +3.75V (Prog.)
+0.5V to +35V (Prog.)
+0.5V to Vin (Prog.)
+0.5V to Vin (Prog.)
+0.5V to Vin (Prog.)
LED Backlight
Drive
MCU/RTC
Memory, I/O
CPU Core
DSP/CODEC
Analog/RF
Figure 1 – Applications block diagram featuring the SMB118/218 six-channel, programmable DC/DC
converters. These integrated power supply and battery managers provide precision regulation, monitoring,
cascade sequencing, output margining and battery charging.
© SUMMIT Microelectronics, Inc. 2008
757 N. Mary Avenue • Sunnyvale CA 94085 • Phone 408 523-1000 • FAX 408 523-1266
http://www.summitmicro.com/
2107 3.0 10/15/2008
1
1 page  
PLEASE NOTE: The SMB118 has entered End-of-Life.
SMB118/218
SMB118 TYPICAL APPLICATION
+2.7 to +6.0V
USB/AC Charging
VDC = +6V
VUSB
Rcsb
Battery Pack
+3.0V to +4.2V
1-cell Li-Ion
10KΩ
NTC
+1.5V to 3.75 @ 65mA
SMB118
VBATT
VIN6
VDDCAP
SW6
GND
DRVL6
FB6
SDA
COMP6
SCL
POWER_FAIL
VIN5
nBATT_FAULT
HEALTHY
SW5
nALERT
nRESET
BSTAT
DCIN
DRVL5
FB5
COMP5
PWR_EN
SHDN
DOCK_DC
VIN4
SW4
DRVL4
FB4
COMP4
BFETDRV
VIN3
PCHSEQ3
DRVH3
BCSH
BCSL
DRVL3
BSENSE
TSENSE
COMPA3
COMPB3
LDOIN2
LDOOUT2
PCHSEQ1
DRVL1
FB1
CSH1
CSL1
COMP1
+0.5V to VIN7(+2.5V typ) @
500mA
+0.5Vto VIN7(+2.5V typ) @
500mA
+0.5V to VIN7(+2.5V typ) @
500mA
+0.5V to +35V (+5V typ)
@ 600mA
Buck or Boost
Rsense2
Vbatt to +35V (+15V typ)
@ 200mA
Figure 2a – Typical application schematic of the SMB118 (QFN-48) showing external circuitry necessary to
configure the output channels as: step-up, LDO, step-down outputs and battery charger.
Summit Microelectronics, Inc
2107 3.0 10/15/2008
5
5 Page 
PLEASE NOTE: The SMB118 has entered End-of-Life.
SMB118/218
DC OPERATING CHARACTERISTICS (CONTINUED)
(Over commercial operating conditions, unless otherwise noted. All voltages are relative to GND.)
Channel [6:4] – Step-down BUCK
VOUT
∆VOUT
Voltage (nominal set point)
Voltage accuracy
VIN[6:4] 4.2V, ILOAD=0A
Note 2, VOUT = 2.5V,
T = -40°C to +85°C
Note 2, VOUT = 1.2V,
T = 0°C to +70°C
+0.5
-2
-2
±1
±1
VIN
+2
+2
VFB
Feedback voltage reference
range
Programmable in 4mV steps
0
1
gm Error amp transconductance
IEA Error amp output drive
RCS CS amplifier transresistance ILOAD = 500mA
160
±20
1.2
RHS
RDRVL
HS Switch Resistance
LS Gate drive impedance
ILOAD = 500mA
Output High
Output Low
320
5.5
2.7
Vcl
Clamp threshold voltage
Programmable 1.0, 1.1, 1.2,
1.5V
1.0
1.5
Vcl_acc
Clamp threshold voltage
Accuracy
Clamp threshold 1.0 and 1.5V
±5
D.C.
Duty Cycle
Maximum, VBATT = 4.2V
Minimum, PWM mode,
VBATT = 4.2V
100
15 30
V
%
%
V
umho
µA
Ω
mΩ
Ω
Ω
V
%
%
%
Summit Microelectronics, Inc
2107 3.0 10/15/2008
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet SMB118.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SMB11 | SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS |  Lite-On Technology |
| SMB11 | TVS Diode, SMD (Transient Voltage Suppressor) |  MIC GROUP RECTIFIERS |
| SMB110 | Five Channel Programmable DC-DC System Power Manager | Summit |
| SMB110 | SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS | Lite-On Technology |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |