|
|
PDF VBUS051BD-HD1 Data sheet ( Hoja de datos )
| Número de pieza | VBUS051BD-HD1 | |
| Descripción | Single-Line ESD-Protection Diode | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de VBUS051BD-HD1 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
VBUS051BD-HD1
Vishay Semiconductors
Low Capacitance, Single-Line ESD-Protection Diode
Features
• Ultra compact LLP1006-2L package
• Low package height < 0.4 mm
• 1-line ESD-protection
• Low leakage current < 0.1 µA
e4
• Low load capacitance CD = 1.3 pF
• ESD-protection to IEC 61000-4-2
± 15 kV contact discharge
± 15 kV air discharge
• High surge current acc. IEC61000-4-5 IPP > 3 A
• Soldering can be checked by standard vision
inspection. No X-ray necessary
• Lead (Pb)-free component
• Pin plating NiPdAu (e4) no whisker growth
• "Green" molding compound
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
Marking (example only)
2
20855
XY
21121
dot = Cathode marking
X = Date code
Y = Type code (see table below)
1
20856
Ordering Information
Device name
VBUS051BD-HD1
Ordering code
VBUS051BD-HD1-GS08
Taped units per reel
(8 mm tape on 7" reel)
8000
Minimum order quantity
8000
Package Data
Device name
Package
name
VBUS051BD-HD1 LLP1006-2L
Type
code
A
Weight
Molding compound
flammability rating
0.72 mg
UL 94 V-0
Moisture sensitivity level
MSL level 1
(according J-STD-020)
Soldering conditions
260 °C/10 s at terminals
Absolute Maximum Ratings
Parameter
Peak pulse current
Peak pulse power
ESD immunity
Test conditions
Acc. IEC 61000-4-5; tP = 8/20 µs; single shot
Acc. IEC 61000-4-5; tP = 8/20 µs; single shot
Contact discharge acc. IEC 61000-4-2; 10 pulses
Air discharge acc. IEC 61000-4-2; 10 pulses
Operating temperature
Junction temperature
Storage temperature
Symbol
IPPM
PPP
VESD
VESD
TJ
TSTG
Value
3
45
± 15
± 15
- 40 to + 125
- 40 to + 150
Unit
A
W
kV
kV
°C
°C
Document Number 81785
Rev. 1.2, 16-Apr-08
For technical support, please contact: [email protected]
www.vishay.com
1
1 page  
VBUS051BD-HD1
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating
systems with respect to their impact on the health and safety of our employees and the public, as well as
their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use
of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively.
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA.
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each customer
application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or
unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages,
and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated
with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Document Number 81785
Rev. 1.2, 16-Apr-08
For technical support, please contact: [email protected]
www.vishay.com
5
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet VBUS051BD-HD1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| VBUS051BD-HD1 | Single-Line ESD-Protection Diode | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |