DataSheet.jp

VBUS05B1-SD0 の電気的特性と機能

VBUS05B1-SD0のメーカーはVishayです、この部品の機能は「Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode」です。


製品の詳細 ( Datasheet PDF )

部品番号 VBUS05B1-SD0
部品説明 Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode
メーカ Vishay
ロゴ Vishay ロゴ 




このページの下部にプレビューとVBUS05B1-SD0ダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

VBUS05B1-SD0 Datasheet, VBUS05B1-SD0 PDF,ピン配置, 機能
www.vishay.com
VBUS05B1-SD0
Vishay Semiconductors
Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line
ESD-Protection Diode in Silicon Package
22543
0.3
22544
MARKING (example only)
1 XY
22454
1 = year code
Open circle = month code and pin 1
XY = type code
0.27
0.6
FEATURES
• Ultra compact CLP0603 package
• Low package height < 0.3 mm
• 1-line ESD-protection
• Working range ± 5.5 V
• Low leakage current < 0.1 μA
• Ultra low load capacitance CD = 0.29 pF typ.
• ESD-protection acc. IEC 61000-4-2
± 16 kV contact discharge
± 16 kV air discharge
• Lead plating: Au (e4)
• Lead material: Ni
• Backside coating
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
ORDERING INFORMATION
DEVICE NAME
ORDERING CODE
VBUS05B1-SD0
VBUS05B1-SD0-G4-08
TAPED UNITS PER REEL
(8 mm TAPE ON 7" REEL)
15 000
MINIMUM ORDER QUANTITY
15 000
PACKAGE DATA
DEVICE NAME
VBUS05B1-SD0
PACKAGE NAME
CLP0603
TYPE CODE
5A
WEIGHT
0.12 mg
SOLDERING CONDITIONS
260 °C/10 s at terminals
Reflow soldering
according JEDEC® STD-020
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITIONS
Peak pulse current
acc. IEC 61000-4-5, 8/20 μs/single shot
Peak pulse power
ESD immunity
Pin 1 to pin 2
acc. IEC 61000-4-5; tp = 8/20 μs; single shot
Contact discharge acc. IEC 61000-4-2; 10 pulses
Air discharge acc. IEC 61000-4-2; 10 pulses
Operating temperature
Junction temperature
Storage temperature
SYMBOL
IPPM
PPP
VESD
TJ
Tstg
VALUE
2.5
45
± 16
± 16
-55 to +150
-55 to +150
UNIT
A
W
kV
°C
°C
Rev. 1.2, 28-Aug-15
1 Document Number: 85899
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 Page





VBUS05B1-SD0 pdf, ピン配列
www.vishay.com
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
VBUS05B1-SD0
Vishay Semiconductors
120 %
100 %
Rise time = 0.7 ns to 1 ns
80 %
60 %
53 %
40 %
27 %
20 %
0%
-10 0 10 20 30 40 50 60 70 80 90 100
20557
Time (ns)
Fig. 1 - ESD Discharge Current Wave Form
acc. IEC 61000-4-2 (330 /150 pF)
18
16
14
12
10
8
6
4
2
0
0
22750
Measured acc. IEC 61000-4-5
(8/20 μs - wave form)
123
IPP in A
4
Fig. 4 - Typical Peak Clamping Voltage VC vs.
Peak Pulse Current IPP
100 %
8 µs to 100 %
80 %
60 %
40 %
20 µs to 50 %
20 %
0%
0
20548
10 20 30
Time (µs)
40
Fig. 2 - 8/20 μs Peak Pulse Current Wave Form
acc. IEC 61000-4-5
10
9
8
7
6
5
4
3
2
1
0
1E-09 1E-08 1E-07 1E-06 1E-05 1E-04 1E-03
22749
IR in µA
Fig. 3 - Typical Reverse Voltage VR vs. Reverse Current IR
45
Transmission Line Pulse (TLP)
40 tp = 100 ns
(Average between 55 ns and 95 ns)
35
30
25
20
15
10
5
0
0
22755
VC = 1.14 V/A x Ipp + 10 V
5 10 15 20
IPP in A
25
Fig. 5 - Typical Peak Clamping Voltage VC vs.
Peak Pulse Current IPP
Rev. 1.2, 28-Aug-15
3 Document Number: 85899
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


3Pages


VBUS05B1-SD0 電子部品, 半導体
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ VBUS05B1-SD0 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
VBUS05B1-SD0

Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode

Vishay
Vishay


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap