|
|
Número de pieza | TLP104 | |
Descripción | IPM | |
Fabricantes | Toshiba | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TLP104 (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
No Preview Available ! TOSHIBA PHOTOCOUPLER GaAℓAs LED & PHOTO-IC
TLP104
TLP104
IPM (Intelligent Power Module)
Industrial Inverter
Operate at high ambient temperatures up to 125°C
Unit: mm
The Toshiba TLP104 consists of GaAℓAs infrared light emitting diodes and
integrated high gain, high-speed photodetectors. The TLP104 is housed in
the SO6 package. The output stage is an open collector type.
The photodetector has an internal Faraday shield that provides a
guaranteed common-mode transient immunity of ±15 kV/μs. TLP104
guarantees minimum and maximum of propagation delay time, switching
speed dispersion, and high common mode transient immunity. Therefore
TLP104 is suitable for isolation interface between IPM (Intelligent Power
Module) in motor control application.
Inverter logic type (Open collector output)
Package type: SO6
Guaranteed performance over temperature: -40 to 125°C
Power supply voltage: -0.5 to 30 V
Threshold Input Current: IFHL = 5.0 mA (max)
Propagation delay time (tpHL/tpLH): tpHL = 400ns (max)
tpLH = 550ns (max)
Switching Time Dispersion(|tpHL-tpLH|): 400ns (max)
Common mode transient immunity : ±15kV/μs (min)
Isolation voltage
: 3750Vrms (min)
UL approved : UL1577, File No.E67349
c-UL approved :CSA Component Acceptance Service
No. 5A, File No.E67349
Option (V4) VDE approved : DIN EN60747-5-5 (Note)
CQC-approved: GB4943.1, GB8898 Thailand Factory
Note : When a EN60747-5-5 approved type is needed,
Please designate “Option(V4)”
JEDEC
―
JEITA
―
TOSHIBA
11-4L1
Weight: 0.08 g(typ.)
Pin Configuration (Top View)
1 VCC
3
GND
SHIELD
Schematic
IF
1+
3-
SHIELD
6 1:ANODE
3:CATHODE
5 4:GND
5:VO(Output)
4 6:VCC
ICC
VCC
IO 6
VO
5
GND
4
Truth Table
Input
H
L
LED
ON
OFF
Output
L
H
Construction Mechanical Ratings
Creepage distance
5.0 mm (min)
Clearance distance
5.0 mm (min)
Insulation thickness
0.4 mm (min)
Start of commercial production
2009-10
1 2015-10-16
1 page Test Circuit 5: tpHL, tpLH, |tpHL-tpLH|
IF=10mA(P.G)
(f=10kHz , duty=10%, tr=tf=5ns)
P.G.
IF Monitor
15pF*
SHIELD
RIN=100Ω
0.1μF RL=20kΩ
VO
CL
IF
VO
VCC
VOL
TLP104
tpHL
50%
tpLH
VTHHL=1.5 V
VTHLH=2.0 V
*: probe and stray capacitance.
P.G.: Pulse generator
Test Circuit 6: CMH, CML
SW →IF
AB
+-
VCM
RL=20kΩ
0.1 μF
VO
VCC
VCM
・SW B : IF = 0 mA
VO
・SW A : IF = 10 mA
tr
11V
1500 V
90%
10%
tf
CMH
1.0 V
CML
CMH=
1200(V)
tr(μs)
CML=-
1200(V)
tf(μs)
5 2015-10-16
5 Page 3.3 Empty Device Recesses Are as Shown in Table 2.
Table 2 Empty Device Recesses
Occurrences of 2 or more
successive empty device
recesses
Single empty device
recesses
Standard
0
6 devices (max) per reel
Remarks
Within any given 40-mm section of
tape, not including leader and trailer
Not including leader and trailer
TLP104
3.4 Start and End of Tape
The start of the tape has 50 or more empty holes. The end of tape has 50 or more empty holes and two empty
turns only for a cover tape.
3.5 Tape Specification
(1) Tape material: Plastic (protection against electrostatics)
(2) Dimensions: The tape dimensions are as shown in Figure 2 and Table 3.
0.3 ± 0.05
φ1.5
+0.1
−0
G
A Unit: mm
K0
2.95 ± 0.2
φ1.6 ± 0.1
F
Figure 2 Tape Forms
Symbol
A
B
D
E
F
G
K0
Table 3 Tape Dimensions
Unit: mm
Unless otherwise specified: ±0.1
Dimension
Remark
4.0
7.6
5.5
1.75
8.0
4.0
2.6
―
―
Center line of indented square hole and sprocket hole
Distance between tape edge and hole center
Cumulative
error
+0.1
-0.3
(max) per 10 feed holes
Cumulative error
+0.1
-0.3
(max) per 10 feed holes
Internal space
11 2015-10-16
11 Page |
Páginas | Total 13 Páginas | |
PDF Descargar | [ Datasheet TLP104.PDF ] |
Número de pieza | Descripción | Fabricantes |
TLP1000A | (TLP1000A / TLP1001A) PHOTOINTERRUPTER INFRARED LED PHOTO IC | Toshiba |
TLP1001A | (TLP1000A / TLP1001A) PHOTOINTERRUPTER INFRARED LED PHOTO IC | Toshiba |
TLP1002A | INFRARED LED + PHOTO IC | Toshiba Semiconductor |
TLP1004A | INFRARED LED + PHOTO IC | Toshiba Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |