データシート ATUC128L3U PDF ダウンロード

電子部品 詳細情報 特性, スペック, ピン接続図

部品番号 ATUC128L3U
部品説明 32-bit Atmel AVR Microcontroller
ロゴ ATMEL ロゴ 
1 Page

No Preview Available !

ATUC128L3U Datasheet, ATUC128L3U PDF,ピン配置, 機能
High-performance, Low-power 32-bit Atmel® AVR® Microcontroller
– Compact Single-cycle RISC Instruction Set Including DSP Instructions
– Read-modify-write Instructions and Atomic Bit Manipulation
– Performance
• Up to 64DMIPS Running at 50MHz from Flash (1 Flash Wait State)
• Up to 36DMIPS Running at 25MHz from Flash (0 Flash Wait State)
– Memory Protection Unit (MPU)
• Secure Access Unit (SAU) providing User-defined Peripheral Protection
picoPower® Technology for Ultra-low Power Consumption
Multi-hierarchy Bus System
– High-performance Data Transfers on Separate Buses for Increased Performance
– 12 Peripheral DMA Channels improve Speed for Peripheral Communication
Internal High-speed Flash
– 256Kbytes, 128Kbytes, and 64Kbytes Versions
– Single-cycle Access up to 25MHz
– FlashVault Technology Allows Pre-programmed Secure Library Support for End
User Applications
– Prefetch Buffer Optimizing Instruction Execution at Maximum Speed
– 100,000 Write Cycles, 15-year Data Retention Capability
– Flash Security Locks and User-defined Configuration Area
Internal High-speed SRAM, Single-cycle Access at Full Speed
– 32Kbytes (256Kbytes and 128Kbytes Flash) and 16Kbytes (64Kbytes Flash)
Interrupt Controller (INTC)
– Autovectored Low-latency Interrupt Service with Programmable Priority
External Interrupt Controller (EIC)
Peripheral Event System for Direct Peripheral to Peripheral Communication
System Functions
– Power and Clock Manager
– SleepWalking Power Saving Control
– Internal System RC Oscillator (RCSYS)
– 32 KHz Oscillator
– Multipurpose Oscillator, Phase Locked Loop (PLL), and Digital Frequency Locked
Loop (DFLL)
Windowed Watchdog Timer (WDT)
Asynchronous Timer (AST) with Real-time Clock Capability
– Counter or Calendar Mode Supported
Frequency Meter (FREQM) for Accurate Measuring of Clock Frequency
Universal Serial Bus (USBC)
– Full Speed and Low Speed USB Device Support
– Multi-packet Ping-pong Mode
Six 16-bit Timer/Counter (TC) Channels
– External Clock Inputs, PWM, Capture, and Various Counting Capabilities
36 PWM Channels (PWMA)
– 12-bit PWM with a Source Clock up to 150MHz
Four Universal Synchronous/Asynchronous Receiver/Transmitters (USART)
– Independent Baudrate Generator, Support for SPI
– Support for Hardware Handshaking
32-bit Atmel

ATUC128L3U pdf, 電子部品, 半導体, ピン配列
1. Description
The Atmel® AVR® ATUC64/128/256L3/4U is a complete system-on-chip microcontroller based
on the AVR32 UC RISC processor running at frequencies up to 50MHz. AVR32 UC is a high-
performance 32-bit RISC microprocessor core, designed for cost-sensitive embedded applica-
tions, with particular emphasis on low power consumption, high code density, and high
The processor implements a Memory Protection Unit (MPU) and a fast and flexible interrupt con-
troller for supporting modern and real-time operating systems. The Secure Access Unit (SAU) is
used together with the MPU to provide the required security and integrity.
Higher computation capability is achieved using a rich set of DSP instructions.
The ATUC64/128/256L3/4U embeds state-of-the-art picoPower technology for ultra-low power
consumption. Combined power control techniques are used to bring active current consumption
down to 174µA/MHz, and leakage down to 220nA while still retaining a bank of backup regis-
ters. The device allows a wide range of trade-offs between functionality and power consumption,
giving the user the ability to reach the lowest possible power consumption with the feature set
required for the application.
The Peripheral Direct Memory Access (DMA) controller enables data transfers between periph-
erals and memories without processor involvement. The Peripheral DMA controller drastically
reduces processing overhead when transferring continuous and large data streams.
The ATUC64/128/256L3/4U incorporates on-chip Flash and SRAM memories for secure and
fast access. The FlashVault technology allows secure libraries to be programmed into the
device. The secure libraries can be executed while the CPU is in Secure State, but not read by
non-secure software in the device. The device can thus be shipped to end customers, who will
be able to program their own code into the device to access the secure libraries, but without risk
of compromising the proprietary secure code.
The External Interrupt Controller (EIC) allows pins to be configured as external interrupts. Each
external interrupt has its own interrupt request and can be individually masked.
The Peripheral Event System allows peripherals to receive, react to, and send peripheral events
without CPU intervention. Asynchronous interrupts allow advanced peripheral operation in low
power sleep modes.
The Power Manager (PM) improves design flexibility and security. The Power Manager supports
SleepWalking functionality, by which a module can be selectively activated based on peripheral
events, even in sleep modes where the module clock is stopped. Power monitoring is supported
by on-chip Power-on Reset (POR), Brown-out Detector (BOD), and Supply Monitor (SM). The
device features several oscillators, such as Phase Locked Loop (PLL), Digital Frequency
Locked Loop (DFLL), Oscillator 0 (OSC0), and system RC oscillator (RCSYS). Either of these
oscillators can be used as source for the system clock. The DFLL is a programmable internal
oscillator from 20 to 150MHz. It can be tuned to a high accuracy if an accurate reference clock is
running, e.g. the 32KHz crystal oscillator.
The Watchdog Timer (WDT) will reset the device unless it is periodically serviced by the soft-
ware. This allows the device to recover from a condition that has caused the system to be
The Asynchronous Timer (AST) combined with the 32KHz crystal oscillator supports powerful
real-time clock capabilities, with a maximum timeout of up to 136 years. The AST can operate in
counter or calendar mode.

ページ 合計 : 30 ページ
[ ATUC128L3U.PDF ]


Link 1 :
Link 2 :



There is a function of 32-bit Atmel AVR Microcontroller.




The 82S126 and 82S129 are field programmable, which means that custom patterns are immediately available by following the Signetics Generic fusing procedure. 1K-bit TTL Bipolar PROM, Address access time : 50ns max.


This part is a darlington connection NPN silicon epitaxial transistor. The 2SD1695 is a Darlington connection transistor and incorporates a dumper diode between the collector and emitter and a constant voltage diode and protection elements between the collector and base. This transistor is ideal for drives in solenoid and actuators.


N-Channel Power Trench, 80V, 80A, 4.5mΩ.


Here is a Color TV Horizontal Driver, Vceo=300V, TO-126 Package.


ユーザーのために可能な限り使用が簡単で、迅速なサービスができるように運営しています。    |   2017   |  メール    |   最新