DataSheet.jp

データシート BT1611I PDF ダウンロード


電子部品 BT1611I Datasheet 詳細情報 ( 特性, スペック, ピン接続図 )

部品番号 BT1611I
部品説明 AM/FM/CD/MP3/WMA Receiver Manual
メーカ Audiovox
ロゴ Audiovox ロゴ 
プレビュー
1 Page
		

No Preview Available !

BT1611I Datasheet, BT1611I PDF,ピン配置, 機能
BT1611i
Owner's Manual
BT1611I MP3/WMA RECEIVER
SUB
RECORD
BASS
INT
AM/FM/CD/MP3/WMA Receiver
with Bluetooth Technology
MENU
/
AUX IN
TUNE

--------------------------------------------
BT1611I pdf, 電子部品, 半導体, ピン配列
BT1611i
INSTALLATION INSTRUCTIONS
This unit is designed for installation in cars,
trucks and vans with an existing radio opening.
In many cases, a special installation kit will be
required to mount the radio to the dashboard.
These kits are available at electronics supply
stores and car stereo specialty shops. Always
check the kit application before purchasing to
make sure the kit works with your vehicle.
Pre-installation
1. Disconnect Battery
Before you begin, always disconnect the battery
negative terminal.
2. Remove Transport Screws
MONO
EQ
CD1211 CD RECEIVER
SCAN
/
AUX IN
TUNE
Universal Installation Using
Mounting Sleeve
1. Remove the detachable front panel, if it is
attached to the chassis, by pushing the
“Release” button.
2. Slide the mounting sleeve off of the
chassis if it has not already been removed.
If it is locked into position, use the removal
keys (supplied) to disengage it. The
removal keys are depicted on page 5.
3. Check the dashboard opening size by
sliding the mounting sleeve into it. If the
opening is not large enough, carefully cut
or file as necessary until the sleeve easily
slides into the opening. Do not force the
sleeve into the opening or cause it to bend
or bow. Check that there will be sufficient
space behind the dashboard for the radio
chassis.
4. Locate the series of bend tabs along the
top, bottom and sides of the mounting
sleeve. With the sleeve fully inserted into
the dashboard opening, bend as many of
the tabs outward as necessary to firmly
secure the sleeve to the dashboard.
5. Place the radio in front of the dashboard
opening so the wiring can be brought
through the mounting sleeve.
MONO
EQ
CD1211 CD RECEIVER
SCAN
/
AUX IN
TUNE
6. Follow the wiring diagram carefully and
make certain all connections are secure
and insulated with crimp connectors or
electrical tape to ensure proper operation.
7. After completing the wiring connections,
attach the front panel and turn the unit on
to confirm operation (vehicle ignition
switch must be on). If the unit does not
operate, recheck all wiring until the
problem is corrected. Once proper
operation is achieved, turn the ignition
switch off and proceed with final mounting
of the chassis.
8. Carefully slide the radio into the mounting
sleeve, making sure it is right-side-up, until
it is fully seated and the spring clips lock it
into place.
3





ページ 合計 : 30 ページ
PDF
ダウンロード
[ BT1611I.PDF ]

共有リンク

Link 1 :
Link 2 :


おすすめデータシート

部品番号部品説明メーカ
BT1611I

There is a function of AM/FM/CD/MP3/WMA Receiver Manual.

Audiovox
Audiovox


多くを見つけるデータシート

部品番号部品説明メーカ
82S129

The 82S126 and 82S129 are field programmable, which means that custom patterns are immediately available by following the Signetics Generic fusing procedure. 1K-bit TTL Bipolar PROM, Address access time : 50ns max.

NXP
NXP
D1695

This part is a darlington connection NPN silicon epitaxial transistor. The 2SD1695 is a Darlington connection transistor and incorporates a dumper diode between the collector and emitter and a constant voltage diode and protection elements between the collector and base. This transistor is ideal for drives in solenoid and actuators.

NEC
NEC
FDMS86368

N-Channel Power Trench, 80V, 80A, 4.5mΩ.

Fairchild
Fairchild
2SC2456

Here is a Color TV Horizontal Driver, Vceo=300V, TO-126 Package.

Toshiba
Toshiba

DataSheet.jpは、半導体や電子部品のデータシートをPDFファイルとして無料提供しています。
回路の開発と設計、修理などのために必要なアプリケーション回路、対立品、ピン配列を確認することができます。
ユーザーのために可能な限り使用が簡単で、迅速なサービスができるように運営しています。


www.DataSheet.jp    |   2017   |  メール    |   最新