AD5162 データシート PDF - DataSheet.jp

AD5162 Datasheet ( データシート ダウンロード )

AD5162 機能 - SPI Digital Potentiometer - Analog Devices

部品番号 AD5162
部品説明 SPI Digital Potentiometer
メーカ Analog Devices 
ロゴ Analog Devices ロゴ 
プレビュー
		

No Preview Available !

AD5162 Datasheet, ピン配置, 機能
FEATURES
2-channel, 256-position potentiometer
End-to-end resistance: 2.5 kΩ, 10 kΩ, 50 kΩ, and 100 kΩ
Compact 10-lead MSOP (3 mm × 4.9 mm) package
Fast settling time: tS = 5 µs typical on power-up
Full read/write of wiper register
Power-on preset to midscale
Computer software replaces microcontroller in factory
programming applications
Single supply: 2.7 V to 5.5 V
Low temperature coefficient: 35 ppm/°C
Low power: IDD = 6 µA maximum
Wide operating temperature: −40°C to +125°C
Evaluation board available
Qualified for automotive applications
APPLICATIONS
Systems calibrations
Electronics level settings
Mechanical trimmers replacement in new designs
Permanent factory PCB setting
Transducer adjustment of pressure, temperature, position,
chemical, and optical sensors
RF amplifier biasing
Automotive electronics adjustment
Gain control and offset adjustment
GENERAL DESCRIPTION
The AD5162 provides a compact 3 mm × 4.9 mm packaged
solution for dual, 256-position adjustment applications. This
device performs the same electronic adjustment function as a
3-terminal mechanical potentiometer. Available in four end-to-
end resistance values (2.5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ), this low
temperature coefficient device is ideal for high accuracy and
stability-variable resistance adjustments. The wiper settings are
controllable through an SPI digital interface. The resistance
between the wiper and either endpoint of the fixed resistor
varies linearly with respect to the digital code transferred into
the RDAC latch.1
Dual, 256-Position, SPI
Digital Potentiometer
AD5162
FUNCTIONAL BLOCK DIAGRAM
A1 W1 B1
W2 B2
VDD
GND
CLK
SDI
CS
WIPER
REGISTER 1
A=0
WIPER
REGISTER 2
A=1
AD5162
SPI INTERFACE
Figure 1.
Operating from a 2.7 V to 5.5 V power supply and consuming
less than 6 µA allows the AD5162 to be used in portable battery-
operated applications.
For applications that program the AD5162 at the factory,
Analog Devices offers device programming software running
on Windows® NT/2000/XP operating systems. This software
effectively replaces the need for external SPI controllers, which
in turn enhances the time to market of systems. An AD5162
evaluation kit and software are available. The kit includes a
cable and instruction manual.
1 The terms digital potentiometer, VR, and RDAC are used interchangeably.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2003–2010 Analog Devices, Inc. All rights reserved.





ページ 合計 : 21 ページ
PDF
ダウンロード
[ AD5162.PDF ]

共有リンク


AD5162 データシート ( Datasheet )


おすすめデータシート

部品番号部品説明メーカ
AD516  AD516 データシート - ETCThere are funtion for (AD513 / AD516) HIGH SPEED FET-INPUT OP AMPSETC
ETC
AD5160  AD5160 データシート - Analog DevicesThere are funtion for 256-Position SPI-Compatible Digital PotentiometerAnalog Devices
Analog Devices
AD5161  AD5161 データシート - Analog DevicesThere are funtion for 256-Position SPI/I2C Selectable Digital PotentiometerAnalog Devices
Analog Devices
AD5162  AD5162 データシート - Analog DevicesThere are funtion for SPI Digital PotentiometerAnalog Devices
Analog Devices



Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z


www.DataSheet.jp    |   2017   |  メール   |  今日の更新   |   English